I need to change a model's lower lip.
What's the best way to avoid a groove in the middle of the lip when creating facial morphs with symmetry turned on and using the grab tool?
If I align the two dots and drag in the exact middle, this doesn't happen, but then I have to grab the lip a bit to one side to keep the lip even, and the groove will start to appear when I drag.
I've got inventor 2011 and for some reason every time I try to add a lip and groove to a drawing it shuts the program down??
I've tried uninstalling the program and reinstalling it again but it made no difference.
I have to make serration (circular groove) on the face of the flange. The problem each groove dia will be different or incremental to the previous groove. I don't want to draw sketch for each one, that will be too much work. Of course, pattern won't work either.
View 8 Replies View Relatedhow to draw this groove from blueprint .
View 9 Replies View RelatedI have been asked to change some of the default weld settings within the weldment template, i.e. set groove weld to full face full face, set the fillet weld to 6x6. so that when we do a new weldment these things are already set, have hunted high and low on here, through google, autodesk knowledge base for inventor but havent found anything, not sure if havent put the right keywords in or that it just isnt possible to do.
View 2 Replies View RelatedUsing Inventor Professional 2013
In the attached assembly, I would like to fill the four corners (see Figure 1) with weld to make one smooth bead around the perimeter of the end cap rather than using fillet weld to lay down four linear beads along the edges. I accomplished this with a groove weld (see Figure 2). However, problems occurred (pasted below) when I attempt to weld this piece to a surface.
Error message:
" Create Weld Feature: problems encountered while executing this command.
example.iam: Errors occurred during update
Fillet Weld 3: Could not build this Fillet Weld feature
The attempted operation had problems trimming and discarding faces. Try with different inputs."
When I had the four original fillet weld beads, I could fillet weld this part to a surface no problem (see Figure 3). When I switched it to a groove weld to get the desired corner appearance, I get errors. I tried to mess around with the tick boxes in the groove weld dialog box to try to fix the problem but nothing worked.
Ultimately, my problem can be solved if I could simply fill the corner gaps without using the groove weld command. This would eliminate the errors associated with fillet welding over groove welds.
Let me know if the attached files do not work. This is my first time uploading an assembly and its associated part files.
Figure 1: Corner with fillet welds (need to fill that gap)
Figure 2: Corner with groove weld (gap filled)
Figure 3: Fillet welded (concave) to plate. Still need those corners filled.
I'm using Photoshop 6, ancient.One job I use it for is to edit .png files that were created in X-Plane's (flight simulator) "Plane Maker" tool. When I open the .png file in Photoshop, the colors invariably look faded when compared with the original. If I edit the file and save it, I end up with colors that are not anything like the original.
Below are examples. Notice the first, a screen grab from Plane Maker, has deeper colors than the second, a screen grab from Photoshop.Are there any settings that can be made in Photoshop to avoid this color shift? If not, I suppose I will just have to fiddle with the contrast and brightness settings.
I am designing a site that uses a lot of irregular shapes, but cant seem to get angled lines to show up smooth. They are coming out very jagged. Any idea how to smooth the lines out? Tips for Photoshop or Illustrator would be great. Thanks!
BTW I don't just want 45 degree angles, but all kinds of various angles.
I am having issue with smoothing my GIF images so that they do not display as jagged in my flash movies.
I am developing them in freehand and then web preping them in photoshop by maximising the colours to ensure high quality display - not worried about movie size right now (i just want to find the fine end of the graphic spectrum).
I am applying the following settings on saving for web: GIF selective, diffusion 256 colours and so on, following all the correct properties and my images (particularily lines and edges) are coming out jagged and pixelated. I have tried gaussian blur but this kills my image clarity and then they just look too soft.
I am using Lightroom CC on my iMac to catalog my photos, a task I really find Lightroom perfect for.
However, I am also using my DSLR for shooting video´s, which I edit with Final Cut Pro. Lightroom is _not_ a part of the video import/editing workflow, so I really do not want to have Lightroom import all videos in addition to all my photos.
How can I set up Lightroom so that it no longer import videos? My current workflow is tedious, and really not one I like: I import everything into Lightroom, and then manually delete all the video´s.
Even when I only want to check mail, the import screen always comes on and has to be x'ed out. (It is an update version from 3 to 5). In program properties there is no appropriate tick I can remove to stop it.
View 4 Replies View RelatedWhen I select a font for the type tool in CS6, there's a list of about 200 fonts - half of which are foreign-language fonts, which I really don't need to see. Is there any way I can remove these from the list of fonts visible in the type tool without deleting them from the system? I don't want to delete them entirely, because I gather that Microsoft's cross-referencing system for font styles needs them. And who knows, one day I might actually need a 14th-century Mongolian font!
It must be possible, because other programs (such as Microsoft Word, and the Visual Studio programming environment) on the same system don't show all the non-European fonts.
Windows 7 Pro SP1
Photoshop CS6
In CS6, when I drag a picture into my ps file, it gets converted into a smart object. If the pic happens to be something like a png or jpg, and i add some adjustment layers or so, PS wants me to save it again (on the hard drive) before I can close it.
View 4 Replies View Relatedis it possible to avoid the installation of photoshop CS3 on the windows partition?
I have 2 partition on my hard-drive CWindows) and DData).
I wanna install CS3 completely on D but it doesn't seem to be possible, the installation forces one to install at least about 500MB on C: Why is that and can I avoid it???
I always used to have my images opened as 'floating' documents.Since I'm using CS4, PS always opens new images 'tabbed', and I have to drag them out of there manually to get a floating window.Is there a way to prevent this? I noticed the 'Open Document as Tabs' setting in the Interface Preferences, but that doesn't seem to do the trick (either enabled or disabled, PS keeps doing it).
View 3 Replies View RelatedWhen I rotate this one and I got blur version in nd version below. How do I avoid blur ?
Check this out below:
I want this:
to this:
I'm designing a new logo for a client and I would like a rectangular form on the background. There is a C-formed shape in the rectangle which should be clipped in the final version. (so if used on black background for example, there's only the regular form on the background with the C in it, but not the shape of the C outside the rectangle on the left and right of the rectangle).
Clipping could be an option but it gives me those fine strokes...
The first image is the ideal result (but not clipped so with shapes of the C outside the box on a coloured background). The 2nd is the result when clipped. Note the small lines where the C-shape touches the borders of the rectangle on the left, right and bottom of the rectangle.
I created vector art in Illustrator, then saved the file as an .ai file.
Afterward, I chose "Save for Web," and exported the file as a .png file.
I placed the .png file at 100 percent into a Dreamweaver file.
The result is a file with jagged edges. How do I save the file to preserve the smooth vector look of the original file?
i have lightroom 4 last version 64bit and w7
can i avoid to create video cache?
i don't import video files and i don't have video files in my catalog
but i have 3gb of cache here
c:UsersUserAppDataLocalAdobeLightroomCachesVideo
in the folder
c:UsersUserAppDataLocalAdobeLightroomCachesVideoMedia Cache Files
c:UsersUserAppDataLocalAdobeLightroomCachesVideoMedia Cache
I'm using Lightroom 4.1.
There an option in Catalog settings called "Automatically write changes into XMP". I like it. Very much. But not for JPEG.
The reason is rewriting the original datetime of JPEG file by Lightroom. It rewrites it even if I don't make any changes in the Develop module. For example, if I simply change item's Caption in Library or item's Copyright field then Lightroom instantly changes my JPEG. I don't want such behavior. I'll try to explain why.
Sometimes datetime of the file can contain important information about when this photo or video was made. For example, some phones don't write EXIF information into the video files (e.g. 3gp). Therefore, the only place where we can see when this video was shot is the datetime of the file. If Lightroom rewrites original datetime, we will lost this info.
I want to use Photoshop CS6 on a Multi - monitor setup, using iGPU multi-monitor + GPU system for 4 monitors.
Preiously, I used Photoshop on a Multi - monitor setup without useing iGPU multi-monitor.And, Photoshop worked well.
However, when I wanted to use 1 more monitor, my GPU supports only 3 monitors.Then, I enabled iGPU multi-monitor function. It supports 2 more monitors.
At first, It worked. But, after I use "Free transform", "Transform" or something like these tools, Photoshop hang up!
I installed both PS CC and BR CC for a second time and received and installed the first updates for CR 8.1 but still I cannot open PS CC without it closing on me immediately again. And when I try to open any photo in PS CC from Bridge CC I get asked if I want to save that file before I close PS CC. With no alternative to do anything else.
View 3 Replies View RelatedIs it true that we should avoid making text in Ps cause the letters appear pixelated?What do you think about the about view?
View 9 Replies View RelatedI am running autocad 2011 for mac to design sails. I was given a autolisp file that will automate the majority of the process, but it uses a .dcl file to input all the numbers. Unfortunately .dcl files are not support with the Mac version and therefore I am looking for any solutions.
- Is there another way to input the information and therefore link the lsp file to something different?
- Is it easy to re-write the lisp file and input directly into that?
At the moment the time I am wasting researching how to make the .lsp program work, I could have hand drawn most of the sails anyway!
How to avoid overlapping of programmatically created Mtext.
I have createdMtext for the points present the dwg file, so that they get displayed as labels.
But when there are some densely located points, these points overlay and cannot be read. The font size also adjusted. Then too there are lot of overlapping.
How to avoid overlapping of programmatically created Mtext.
When you create shapes that fits together, there appeares a thin line that also shows when you make a jpeg from it. I'm a vector contributor at iStock and making a preview jpg with all those white lines looks really ugly (see attachment).
Here is a simple solution. Copy your shapes on top of each other and the lines are gone. This way your work stays 100% vector. For work that hasn't to be 100% vector, you could make a bitmap copy and place it under your vector image.
How to avoid the overlap between the level sign and the drawing?
I’m wondering concerning the default behavior of the Revit regarding the level signs. In the screenshot below, a wall of 9 meters is drafted in the indicated location while its 4 elevations are displayed next to it.
the north elevation has an overlap with the level signs and also the south elevation is at the end of the level signs. how to manage this problem and also based on what these levels are set this way (by design).How the overlap might be avoided?
How to avoid the conflict between the “attribute” values?
I wanted to label the points (stored in txt file) using the lisp file ascpoint.lsp; This requires to build a block with 4 attribute values,But how to ensure that there is no conflict between the labels of the coordinates represented in the 4 attributes? They may overlap depending on the number of characters of the value of each attribute (coordinate).
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We have come across a problem using Adobe Photoshop CS6 and Illustrator CS6 on a MAC. We use Illustrator CS6 for putting together the graphics and use Photoshop CS6 for editing. When we save the image in full res and browse the image - the image looks grainy both on a Mac and a PC.
View 1 Replies View RelatedI have designed an Ad in Illustrator which I need to export to insert into an email. When the client views on the Mac (I am working on PC), compression like artifacts are visible around the text (see below... it is mainly around the white text in the red background header box). I have tried: Outlining fonts Saving as JPG / PNG300ppi / 600 ppi..how to save it so it is clean and crisp (like the AI design)
View 5 Replies View RelatedWe work in a packaging environment using MAC OS 10.6.8 using Illustrator CS6.
In order to ouput Illustrator files correctly through a RIP, we expand all effects (shadow, glows, etc) before converting them to a Hi Resolution PDF to impose for output.
What we have started to see is lines starting to show up on the PDFs (and the Printing Plates too) where the bounding box of the effect used to be. We have seen lines show up in earler versions of Illustrator but not to the number or thickness they seem to be in CS6.
Is there any way to avoid these lines from showing up (and being printed)?