Lightroom :: Options To Backup LR4 To Multiple Locations?
Nov 4, 2012
One of the few things I miss about Aperture is the ability to create a number of backup vaults containing all the information needed to recover a database of photos. By that I mean the photos and the metadata needed to create the 'edited' photos. I'm wondering if it's possible to do that with LR4.
At the moment I'm backing-up my photos and catalog to a bootable drive and also backing up the catalog once a week. If I were also to backup my Lightroom folder and the associated photos to a drive (e.g. automically syning to a memory stick) would that provide all the info needed to create the edited files and metadata?
View 1 Replies
ADVERTISEMENT
Dec 19, 2011
hiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
View 4 Replies
View Related
Jul 26, 2012
I would like to use my part number in the upper left hand corner of my dwg tab and also on my parts list tab as well as it original location in the title block of my dwg. How can I set this up so when I change the part number in my title block it will also automatically populate the other 2 locations? I am using Lt 2010.
View 2 Replies
View Related
Apr 14, 2013
Is there a way to save to multiple locations from Photoshop Elements 11?
View 4 Replies
View Related
Sep 17, 2013
So what I need to do is to take the following
filename (1) from Folder (A)
filename (1) from Folder (B)
Open in Photoshop and run an applescript to combine the two images and save the result to a location.
Then
filename (2) from Folder (A)
filename (2) from Folder (B)
Run the batch again and again until all images in the sequence are processed in both folders.
Was looking into an Applescript that may do the job but can't seem to find anything. Happy to look at purchasing a solution if it is available.
View 1 Replies
View Related
May 30, 2013
I am new to using Tool Palettes. I have created a folder on my C: drive which contains all my tool palettes. Right now, I get the symbol of a circle with a line drawn through it and cannot use my tool palettes.
In the Options tab, I noticed that there are the "Tool Palettes File Locations" and also "Authoring Palette File Locations". What is the difference between the two? Do I need to do something to both so I can use my tool palettes without difficulty?
View 1 Replies
View Related
Jan 14, 2013
Does Autodesk 360 cloud storage work in any way shape or form similar to a Vault whereby users can check out, lock, and then check in designs? Can Vault be used in conjunction with Autodesk 360, or does Autodesk 360 eliminate or replace the need for Vault?
What's the best way for individuals working at multiple sites to work without overwriting each others' data or having save collisions?
View 2 Replies
View Related
Dec 29, 2013
I have a question about the location of any metadata (IPTC, keywords, etc.) written in Lightroom 5 to my raw files. I understand that this data is written (embedded) into jpg files but as a .xmp file next to the raw files. My question is, if I purge the jpgs and do NOT continuously copy the updated .xmp files to my backup drives, and if I were to lose my Lightroom catalog, will all my Lightroom metadata that I added be lost? Or, does Lightroom keep all my metadata in the catalog file? Is the Lightroom catalog the "source" location of the data that's added to the jpgs and .xmp file?
View 2 Replies
View Related
Feb 27, 2013
I Upgraded to LR 4.4 RC and now I am missing my saved locations in the map module.
View 1 Replies
View Related
Dec 15, 2011
1-When shooting tethered, is there a way to have it place the incoming raw files in two locations at once? Such as on an external as well as the internal drive for backup purposes?
2-When I plug the camera in (D300s), Windows 7 sees the camera almost instantly. However, Lightroom takes a minute and 30 seconds before it sees it to allow tethered shooting.
View 1 Replies
View Related
Dec 14, 2012
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies
View Related
May 26, 2013
When i back-up the catalogue, i assumed the backup would be mede of al the tags added to photo's. When i check the catalogue-files, i see a whole lot of jpg-files. My actual photo-collection contains jpg-, raw an avi-files.
I have a habit of making a copy of all my photofiles, but now it seems double
Question: Does de backup-function of photoshop elements 11 actually make a backup of tags and photo's?
View 4 Replies
View Related
Apr 20, 2012
In CSS 3, I'm accustomed to being able to set multiple inset box-shadow values so that I can set four (or even more) inner shadows to a rectangular shape. In Photoshop, I can only set one inner shadow. I'm already using stroke for the border, and inner glow doesn't provide me the granular control I want for setting a different inner shadow color on each of the four sides of a rectangle.
In other words, imagine a rectanglular shape with a 1px border and four 1px inner borders, each of different colors.
View 2 Replies
View Related
Nov 9, 2011
I would like to be able to extrude an object then do a subtract or something similer, then somehow put the subtract on a layer so if i hide said layer the extrueded object will be showen as if it never had the subtract applyed. But if the layer is show agean then the extrued will have a hole in it agean.
P.s. for an example of one thing this could be used for, modeling wrenches with difrent shaped grips but the same handle. Without just making multiple copys of the handle.
View 1 Replies
View Related
Aug 29, 2012
I uninstalled Lightroom, because it was too slow on my computer. It put a lot of library files and directories in My pictures folder.
When I use a backup program (SyncbackSE) to backup my pictures, it starts to scan all the Lightroom library files and it takes forever (hours and counting). Even though Windows cannot find the directories (with hidden and system files shown). I want to completely delete the Lightroom directories, because now I can't backup my images anymore. It is a pain in the dark places.
View 1 Replies
View Related
May 24, 2013
If LR4 backup does not backup the actual photos,and the work done in LR4, how do you back up the photos? Is online backup of the PC the only way? I do a backup each time I exit LR but if the adjustments are not backed up that is not good.
View 2 Replies
View Related
Jul 12, 2013
My LR4 backups took forever (130,000+ images) on a 3-year old iMac (2.93 Gig i7 Intel w/ 8 Gig RAM and OS 10.8.4), but it DID complete the backup procedure. Unchecking Optimization and Integrity Check sped up the backups considerably. Upgraded to LR5 and not backups WILL NOT COMPLETE, regardless of what is checked off or not. Longest time I've waited so far is 30 hours.
Backups have been tried to internal Mac HD, an external 2 Gig, an external 1 Gig, and a 10 Gig Drobo array. ALL fail to complete.
View 5 Replies
View Related
Apr 11, 2012
I have not been able to restore my catalog(s) using the Backups. My computer crashed and will not start up. So I am thinking, whew – good thing my original image files and backups are stored on a separate (and unaffected) hard drive (plus 2 additional backups of all of this). Until I tried to restore my catalog from the backups.
I am contemplating what to do with the crashed computer, I decide to check the Lightroom backups just to ensure that work fine.
.If I try to open the backup catalogs on my laptop (a separate computer from the one that crashed) without moving them from their current location/ folders (in backup folders on the hard drives) I get an error message that says the catalog file is not writable (due to incorrect permissions or because another Lightroom application is using the catalog).
If I move the catalog backup to the laptop (to a folder location that has unrelated functioning catalogs), I get a message that says the folder cannot be found. I have tried to restore 3 separate LR3 catalogs. I have not attempted to restore the LR4 catalogs yet.
View 2 Replies
View Related
Dec 31, 2013
Upon exiting (shutting down) Lightroom 5, we're given a choice to backup the catalog. Is there a way to manually backup it up (without exiting Lightroom 5?
View 2 Replies
View Related
Jan 4, 2014
Is my image backup plan fundamentally flawed? My lightroom catalogue refers almost exclusively to RAW files, but for each file, once I've done the required edits, I "export as DNG" to make a backup which has the edits embeded in. I prefer to use RAW files as the main file but I save the backup as DNG just to save a bit of space)
However, if I replace a folder of RAW files myphoto1.CR2, myphoto2.CR2 with a folder of DNG the equivalents myphoto1.dng, myphoto2.dng then not surprisingly Lightroom shows the files are missing. (At this point all I'm doing is simulating a backup recovery). I can "find missing folder" easily enough and the ? disappears from the folder list, but the individual images in the library are still missing. Again this is not really surprising because although the file names are the same as those referenced in the library the extension is DNG rather than RAW.
Now the surprising part (for me anyway).....I can "find missing file" by pointing to the replacement DNG and it warns me that the file name is not the same (because the extension is different) and asks if I want to link them anyway. I say yes and once again the image file is linked to the image reference in the library. So far so good, BUT, despite ticking the box which is meant to link neighbouring files, only the one image is linked.
Clearly if I do face disaster and need to use my backup DNGs then I can't go individually linking each and every image. Is there a quicker way, or is my backup plan fundamentally flawed?
View 1 Replies
View Related
Sep 16, 2012
I am very new to Lightroom I am wondering how I would go about backing up my library when I used Apple Aperture It would have a file called " Aperture Library " and I would just copy that over to my external hard drive every month. How would I do this in Lightroom ?
View 3 Replies
View Related
Jun 10, 2013
The LR 4.4 catalog backup fails when exiting the application. I have set my catalog backup location on a NAS hard-drive (connected via Gigabit ethernet), which has sufficient empty space and correct network permissions. An empty backup folder is created, however no catalog file is copied into it. After the backup starts and checks integrity and starts the backup, a second dialog box pops up that says do you want to back up. The first dialog box is open with the progress bar about halfway complete, but can't be made active. If I start another backup, it runs part way and says can't complete as the same as the others report.
This is strange, since in earlier versions of LR 4 (and even in LR3) I had none of these problems.
I am running Mac OSX 10.8.4 with 2GB of RAM.
View 1 Replies
View Related
Jan 31, 2013
What viewing and/or editing capability will exist if the Lightroom catalog (not the full image files but only the previews) are exported and installed on a laptop? I would like to vuew the images while traveling and do minor editing but the complete image files are too extensive to transfer to the laptop. The comntempated procedure is to export as a catalog with neagtive files unchecked but available previews checked.
View 2 Replies
View Related
Jul 12, 2013
I merged two databases and renamed the merged database. I renamed both the Ircat file and the Previews file. The database opens and displays correctly with my history displayed in the Develop module. However when I close Lightroom with the Backup option, the backup directory is not created.I have Lightroom 5 installed on a Windows 7 desktop computer.
View 1 Replies
View Related
Apr 12, 2013
I accidentally deleted my backup file from the folder that light room created in my folder. I have it backed up in my Time Machine but I can't find a way to ask light room to look at it again. I can put it back in to its place but light room isn't seeing it or I just can't figure out away to ask light room to see it again.
View 7 Replies
View Related
Sep 16, 2012
I need to re-insatll my PC and wanted to know how I can backup/restore my LR4 presets/preferences. The most important for me to keep are the Smart Collections, Keyword list and Export settings (to Flickr). I also use a number of plug-iins, but I imagine I simply need to re-load these (however, if I can keep the settings associated with these plug-ins that would save a lot of time).
View 2 Replies
View Related
Feb 1, 2012
I accidently deleted a directory containing some pictures. How do I retrieve these pictures from my latest backup?
View 6 Replies
View Related
Mar 29, 2014
The backup of my catalog aborts with an error! LR says that it could not back up the catalog. Folder permissions and sufficient disk space is available.
Until a few days, everything was still working. Even if I create a new catalog I get in the catalog backup, the error message
View 6 Replies
View Related
Nov 7, 2013
Can the backup catalog screen be cancelled and then remain in the program?
View 1 Replies
View Related
Jun 27, 2013
How to transfer my backup files into lightroom ?
View 4 Replies
View Related
Jun 9, 2012
A couple questions on backing up the catalog.
1. What is the default location for the backup?
2.Can I change the default location? I would like to keep the backup on an external drive
3. If I can not change the back up location or Lr must do the backup,can I copy/paste the Catalog I want to keep to my external drive.
View 2 Replies
View Related
