I just upgraded to LR 4.2 and have lost the ability to shoot tethered with my Canon 5D. I reloaded LR 3 and everything works fine, so this eliminates a bad camera or tether cord. Something has happened in the upgrade!
View 2 RepliesUsing Lightroom to shoot tethered to a Leica M9?how to do it?
View 7 Replies View RelatedI was under the false impression that Lightroom 5 would work with my Nikon D90. This does not seem to be true..
View 2 Replies View RelatedCan I shoot tethered into Lightroom 4.2 with my Nikon D3X?
View 2 Replies View RelatedI need to shoot in tethered capture mode and have found that my D90 in not fully supported in this mode. A D7000 is fully supported, but will cost somewhat more than I had hoped to spend. The new D3200 would be an excellent match for our needs (dental photography). My question: Do this camera is supported in tethered capture and if not, does Adobe plan on adding it as a compatible camera anytime soon?
View 1 Replies View RelatedI am a mac user with 10.7 OS. I recently upgraded to LR5.3 and thought to try out the tethered shooting feature with my Nikon D300. In the ‘Tethered Capture Settings’ window it shows the naming format as a DNG file. I only import image files in their native ‘NEF’ format though I am aware of the advantages of ‘DNG’ files.Anyway I noticed the captured images were named as ‘nef’ files with its standard sidecar xmp file. Note the lower case lettering for 'nef'. I am not able to import these files to my external HD because these images were grayed out in the Import window. However if I changed the format names to upper casing, NEF, these images are visible for import.
How can I avoid the extra step of having to the change the casing of the letters and have the captured images in the tethered shoot all have the correct upper casing instead?
I am trying to practice shooting tethered for an upcoming shoot. I am unable to get Lightroom and my Canon 70D to connect. I receive the dialog box shown below several seconds after attempting to connect. I went through all the steps on the "Troubleshooting tethered capture in Lightroom" and can shoot tethered using Canon's software. I am using Lightroom 5.3 on a MacBookPro 13 inch with 16 gb ram running system 10.9.1
View 1 Replies View RelatedShooting tethered only seems to allow me to store the images in lightroom, not on my camera - really would like to do both
View 1 Replies View RelatedI have somehow lost the option of adjusting highlight, shadows, and whites on my Develop:Basic panel. What happened to those adjustments and how do I get them back?
View 5 Replies View RelatedI have done but I am using lightroom 1.4. Previously, any pictures I edited would show as an edited file in the library now all that happens is the original image shows as the edited image.
View 2 Replies View RelatedI recently downloaded Publisher and just now went to scan in a pic through Photoshop and discovered that my options in importing are limited to Annotations and WIA support. I tried to scan in through Picassa and it said that the scanner has been taken over by another program. I can only assume that it's Publisher. So, short of uninstalling Publisher,
View 3 Replies View RelatedI have lost the ability to see my layers. I created an image and when I open it, I can see by the text displayed at the top of the image that it has five layers. However, when I click "Open the Layers Dialog", the five layers don't show. Perhaps I've locked it somehow? It was saved as a .xcf. Am very new to GIMP.
View 5 Replies View RelatedI suddenly lost the ability to copy and paste!
View 5 Replies View RelatedI opened up my AutoCAD LT 2010 this morning at work and went to work on an existing file only to notice I have lost the ability to type in measurements. Meaning, when I go to draw a line I don't have that option to just type in 2.00 or whatever measurement I need. Same with drawing a rectangle or fillet; the down arrow prompt has dissappeared and I no longer can specify length by width (or radius/dia with fillet). Did I accidently hit something to cause this to dissappear?
View 2 Replies View RelatedI'm on Autocad 2008.I can not edit an existing MTEXT text when I double click it. Is there a commond that needs to be turned on or off?
View 7 Replies View RelatedBut, I've lost the ability to open drawings with the traditional "tree" type search.... Something like Windows Explorer. Just before this happened, I had blown up a drawing by, apparently, importing one too many iges files. Got a message that Autocad had an error and was shutting down. Now, when I hit file/open, I get nothing but the command line asking me to enter the drawing path.
View 5 Replies View RelatedMaybe it's because I have a mind-dulling headache today, but I'm just not seeing the way to either create an inverted vector mask or invert an existing one.
For example, in the following layer stack, I'd like the vector mask on the group to create a transparent hole in the image, rather than make the outer part of the image transparent. Note that the [Invert] button in the Properties panel is unavailable (grayed-out).
If I could have created the vector mask in the first place using the rectangle tool, but inverted, that would have been okay as well, but somehow the sequence to do that escaped me as well. I know how to do this with a selection, but I'd rather keep it in vector land.
Since I upgraded to CS 5.5 I lost the ability to custom image warp in Photoshop. The icon is gray. how to get it back?
View 15 Replies View RelatedCapturing sd dv from a sony handycam using VS9 and a USB conection to pc. Few days ago all seemed to be ok was able to capture at 640x480 (I think) but now for some reason information section is showing 320x240 with a corresponding really poor quality preview. No matter what changes I try to make in the capture options or project properties etc it will not now allow me to capture at a higher quality. The options menus don't even show a higher quality available than 320x240. Tried at both AVI and Mpeg format capture settings but no change.
windows XP Home
ATI Radeon 1200 series
32 bit
1gig RAM
PAL region
I've just updated and now when I export a pdf, and lines with arrow heads just export the lines - ie no arrowheads present! This is particularly annoying as I'm in the middle of jobs and clients are coming back to me with "where are the arrows!"
View 9 Replies View RelatedAdobe illustrator CS5 on Mac OS X 10.7.4.
I used to be able to do something like effect->3d-> revolve, then go to the actions panel and bring up the 3D revolve, click on it and edit it again. Now, when I open the actions panel the simple 3d revolve is replace with a long long list of actions of course I can't bring up the 3d revolve effect and edit it.
I have removed all of the Illustrator prefs in my library file; but, it still does it.
It was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies View RelatedI have lost the ability to free scale objects/text boxes etc. in Illustrator CS5. I have to use the scale tool every time I need to adjust the size of something and it is not a sustainable technique in terms of time/productivity/function.
View 5 Replies View RelatedAll of the sudden I can't create a customer profile when creating a new document. Earlier I selecting the print profile. I tried opening a new document and creating a custom profile but that option is grayed out.
I created custom brushes yesterday but they don't appear today. Is that because of the profile that the brushes were created with and without that profile I won't see the brushes?
lost ability to preselect lines when typing keyboard commands?
View 3 Replies View RelatedIs it possible to add a shoot name to photo's that have already been imported, I can't see an option to do this in rename photo's
View 1 Replies View RelatedI am attempting to shoot with both of the above cameras tethered to lightroom, but when I swap cameras it won't shoot as the display on the camera states that it is busy. So is it possible to shoot with two cameras attached to lightroom at the same time?
View 4 Replies View RelatedI did a studio shoot recently and all 400+ images were properly exposed. But at one point during the shoot I must have hit a setting on my camera that under-exposed by 1 stop or so about nine frames. Is there a way in Lightroom 4 to bring those nine frames up to the same exposure value as the others. I was shooting in Canon camera RAW.
View 2 Replies View RelatedIt seems that even with a calibrated screen and across multiple print labs and colour profiles, my prints will always come out about a third stop darker than what looked good on the screen. I attribute this to the screen emitting light vs. the page only reflecting it. My question: is there an efficient way to give an equal exposure boost across an entire shoot? I don't want to sync a specific exposure setting. I want to make virtual copies for print and then add maybe 0.3 exposure to all files, on top of their current setting.
The only way I can think do to it now is to export 16-bit tiffs which will reset the exposure to 0.00 for those files, and then sync them all at +0.3 exposure. This is really inefficient for time and hard drive space. Even a preset will only set a specific overall exposure setting. I want a preset that adds exposure to the existing number.
Way to import the raw file when I shoot jpeg and raw at the same time.. and then develop those files ? Also did there used to be a setting during development for "lights" ?
canon 5d canon 70 to 200 2.8 L
Win 7 64bit
Lightroom 4.1
Photoshop CS5
The Filename Template Editor has different options depending where it is opened from
If it is opened from the Import menu there is an option to add "Shoot Name".
If opened from the Library>Rename Photos there is no option to add "Shoot Name".
Furthermore, if one invokes a preset by the Library>Rename Photo route, that was created during Import with a "Shoot Name", then the "Shoot Name" part doesn't show up in the preset.