I work with a comercial lab in order to get my prints in a special format... I asked them for the .icc profile which they work with, on such prints... They sent me this .icc profile.
ICC Profile Table.Icc (3,8 Mb)
Is there any way to import such .icc profile into LIGHTROOM4?
How do I opearte to get my screen samples using this concrete profile?
As my camera is fairly "old", lightroom does not have a lens correction profile for it. I have created a lens correction profile with Adobe Lens Profile Creator. Now how can I import this profile in Lightroom?
View 11 Replies View RelatedI have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
I am an archaeologist working with survey equipment and Map3D for a few years but now I have the following problem.
When I import the shapefiles created in my leica/topcon equipment into Map3D (mapimport) there is the possibility to select which attributes are going to be imported with an import profile file (.ipf).
How do I create the above and save it so that I do not have to go through the same process again?
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
View 5 Replies View RelatedIn Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
I just bought the Tamron SP 90 2.8 DI MACRO USD and LR lens profiles only lists this lens for Canon (F004E) and Nikon (F004N). There is no profile for Sony (F004S) ! Any drawback if I use F004E or N ? Or better use a the profile of the older Model of that lens where there is a Sony profile ?
View 7 Replies View RelatedDownloaded the BLURB color profile and installed to the system. Restarted LR and it did not appear in the other list for color profiles. I checked and found the profile in c:/Windows/System32/spool/drivers/color. I tried coping the file to c:/ProgramFile(x86)/CommonFiles/Adobe/Color/Profiles/Recommended. Restarted LR and still no BRURB icc shows up in the list. I also noticed there were other profiles in these directories which do not show up in the list. What am I doing wrong? Is there another menu which controls the "other..." list?
View 3 Replies View RelatedWe use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies View RelatedWe are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
Is there a way in Revit to export or import settings much like a profile in AutoCAD and how I set up the icon to point at that profile when the program opens? I would like to know how be able to customize where the program looks for the families and other items over the network, so all users can see the same thing, in options.
Attached is the properties of the AutoCAD icon. The Target is set-up to point to the "AutoCAD Architecture (US Imperial)" profile. I would like to do something similar in the Revit icon.
I need cross section information of a creek for a Hydrology program (DRAINS in Australia) and need to extract this from a surface I have created in Civil 3D. I require the Chainage and Level for a profile which represents the creek cross section at several specific locations. The information is essentially the data bands in a Profile which I can create, however I cannot see how to obtain this information in a form I can use.
the format of the data can be copy and pasted into Excel from which I can directly import the information into the software.
The usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedWhy do my images look much darker and contrasty in LR(4.3) then they do on PS(CS6) where they have far more tonal range? I'm looking at them side by side on the same screen. I know it has to do with ICC profiles but I can't find how you set that in LR. An example can be viewed here: URL....
View 8 Replies View RelatedI'm using Lightroom 4.4 on a five-year-old iMac. I haven't been able to upgrade to LR 5 because it requires an operating system upgrade, but the technicians at the Apple Store say my machine is too old for the upgrade. I just bought a new Sony 18-105 lens which requires siginificant software lens correction. It has been included in the latest ACR in LR 5, but not LR 4. Is there any way I can locate and load the lens profile for just this one lens in my LR4? I've looked and there is no profile in the Adobe Porfile Downloader I can use.
View 14 Replies View RelatedI'd like to use printer color management in LR4. My printer is not in the list. Where do I get ICC profiles for an HP Photosmart 8250 printer and "HP Advanced" paper?
View 20 Replies View RelatedCouple of days ago I noticed Lightroom colours are a bit off. Especially when i do black and white edits. I don't know much about colour profiles so I don't want to mess with them myself.
View 3 Replies View RelatedHow can I erase a profile that I don't use in lightroom ....
View 3 Replies View RelatedI use Lightroom 3.6. The "lens profile corrections" does not have my lens in the drop-down menu. Is there a way other than using the Adobe Lens Profile Creator Tool to create this profile? The lens is the Nikon AF-S DX NIkkor 18-105mm F3.5-5.6 G ED VR, and I use the Nikon D90 dslr. I only shoot JPEGs.
View 1 Replies View RelatedMy problem is that when I export JPG's from Lightroom (100% / sRGB / sharpen for screen) the picture seems to lack contrast and the colors look less saturated (Looks like this everywhere, including Windows Preview, Firefox, Photoshop..). If I select Soft Proofing and sRGB, the colors look correct.
Also if I take a screen capture and save it as JPG, the colors look similar to my preview in Lightroom. I have tried to export in sRGB, Adobe RGB and ProPhoto RGB color profiles but none of them looks the same as LR preview.
My camera is a Fujifilm X20. This profile is normally included in LR 5.3. But if I want to select it, it's only possible to select model Fujifilm FinePix X100 and profile Adobe (Fujifilm FinePix X100). How can I change this?
View 3 Replies View RelatedAt work, on a Windows 7 laptop, I used the Adobe Lens Profile Creator utility to make an LCP file for a Nikon 1 6.7-13mm zoom lens. After submitting that LCP file to adobe via email, I copied it to my Dropbox. At home, on my Mac OS X 10.8.5, I copied the LCP file from the Dropbox to:
LibraryApplication SupportAdobeCamera RawLens Profiles1.0
Then I launched LR 5.3, navigated to a raw (NEF) image shot with this lens, and attempted to apply the lens correction in the Develop pane. Although the Library correctly shows the meta data for the lens and camera, the Lens Correction section in Develop does not even list that lenses LCP file in the drop down menu. Instead, LR attempts to apply a different lens profile which does not match the focal length of the zoom. I'm wondering if the LCP file that I created will only work on a Windows PC since that is where it was created?
I have Lightroom 5. I can see lens profiles for JPG files but they don't appear for DNG files.
View 3 Replies View RelatedHow and where to get profile for lens Panasonic 3/4 for LR4
View 2 Replies View RelatedLR5.2 said that the ICM profile is invalid or missing. My Printer Epson Photo R3000.Older Profile are good.
View 2 Replies View RelatedI need to ship off some images WITHOUT a profile.
View 32 Replies View Related