Lightroom :: Upgraded To 5.3 And Now Can't Print
Dec 23, 2013In the upper left cornor of lightroom it says "preparing print job" and I get an error message "could not start print job." Running Win 7 (6.1) And it stops there.
View 2 Replies
ADVERTISEMENT
Lightroom :: Upgraded To 5.3 - All Presets Gone
Dec 14, 2013i upgraded to LR 5.3 this morning, using the Store Presets with this catalog option, as well as the Upgrade wizard. When LR5.3 opened at the end of the process, all of my Import, Export, or Develop presets were gone. all of those folders are empty (for example C:UsersmePicturesLightroomLightroom SettingsDevelop PresetsUser Presets shows "This folder is empty"), and when i open LR 4.4 (the previous install), the presets are gone as well.
View 10 Replies View RelatedLightroom :: How To Convert 2 Catalogues To Upgraded 3
Apr 23, 2012I recently upgraded from LR2 to LR3. I was not prompted to convert my catalogues even though I have read I should have been. Now what? I have two programs on my computer. I want all catalogues in the new LR3 program.
View 1 Replies View RelatedLightroom :: Can Upgrade From A Previously Upgraded Version Of LR
Jul 12, 2013I was wondering if you can upgrade to lightroom 5 from a previously upgraded version of Lightroom as I'd like to do this.
View 2 Replies View RelatedLightroom :: Upgraded From 4 To 5 / Images Didn't Transfer
Jul 30, 2013I updated to LR 5 but my photographs didn't transfer to 5.
View 5 Replies View RelatedLightroom :: Recently Upgraded To LR4 And Adjustment Brush Does Nothing
Mar 18, 2012I click on the brush and zero out all the sliders except for exposure, for example. I adjust settings for brush and start brushing on targeted area. Nothing happens and mask overlay does not show red on brushed area. Am using Mac 10.6.8. I also have multiple upgrade catalogs - Lightroom 3 Catalog-2, and -3, and -4. I would prefer to have just one.
View 2 Replies View RelatedLightroom :: New V4 Adjustment Brushes Not Available In Upgraded V3 Catalogue
Mar 12, 2012I have installed the trial version of Lightroom 4 but after upgrading my Lightroom 3 catalogue I am not able to access the new adjustment brushes such as noise etc. on any image from the upgraded catalogue - If I import a new image then all of the new functions are available. Is there something else I need to do to allow me to use the tools on the existing catalogue? I have tried deleting the “Lightroom 4 Catalog.lrcat” importing the catalogue from within LR 4but I get the same result.
View 4 Replies View RelatedLightroom :: Upgraded Version But Catalog Unchanged
May 20, 2012I upgraded to LR3 but notice that in the window title bar in the LR window, it says Lightroom 2 Catalog-2-2.lrcat. I a wondering if I did something wrong during installation. The programme seems to be working fine but my LR book indicates that when installing an upgrade, the catalog will be upgraded too.
View 3 Replies View RelatedLightroom :: Upgraded 4.2 - Edit In External Now Loses History
Oct 10, 2012Updated to LR 4.2, then when switching to 'edit in' Photoshop CS5 getting "This version of Lightroom may require photoshop camera raw plug-in version 7.2". However, checking for updates in Photoshop CS5 says all up to date as does LR. In the dialog I would say 'Open Anyway' and at some point I must have clicked the button to no longer show this message.
Now when I 'edit in' PS and come back to LR there is no entry in History, it's blank. In the past I would see one entry 'edited in PS' and then make further LR edits from there if needed. What happens now if I make an edit in LR I can't 'Reset' back to the original 'edited in PS' to start over because that doesn't exist in History. If I reset it will reset just above the last LR edit. This is awaful and has screwed up my workflow. It's damaged several PS -> LR edited images.
After LR 4.2 upgrade LR still showed an older version of RAW. Somewhere after I unchecked that box to stop the message, now when I look it says Camera Raw 7.2 even though I didn't do any further updates, and both LR and CS5 had reported they were up to date.
EDIT/UPDATE: I just found 'Reset all dialog boxes' in LR preferences and now I get the message again. It appears before I checked the box 'Don't show again' the last time I also clicked 'Render using Lightroom' rather than 'Open Anyway' which I was doing before that.
Now PS CS5 About -> Plug-in - Camera Raw is 6.7.0.339 and Lightroom 4.2 is Camera Raw 7.2 (?)
Windows 7 64 bit | LR 4.2 | PS CS5
Lightroom :: Upgraded Catalog From 4 To 5 - Book Collection Failed To Import
Jul 9, 2013When I upgraded my LR4 catalogue to LR5, a book collection failed to import. What can I do to fix this problem so that I can continue working on the book project in LR5?
View 2 Replies View RelatedLightroom :: 4 Print Module - Print And Print One Tabs Greyed Out
Nov 25, 2012In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedLightroom :: How To Create A4 Borderless Print In Canon Mg6150 From Within Print Module
Nov 1, 2013I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
Lightroom :: Switch To Print Module And The Print Review Is Now Blank (100% White)
Jan 7, 2014All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
Lightroom :: Setting Print Size To A3 Or Bigger Using 5 For Printing At Print Shop?
Feb 28, 2014I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedLightroom :: How To Reset Print Template Screen In Print Module
Apr 1, 2012I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedLightroom :: How To Add (almost) White Border Around Photo(s) To Print In Print Module
Oct 14, 2012How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
Lightroom :: Print Doesn't Show A Selected Photo And Won't Print
Oct 13, 2012How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedLightroom :: Print Layout Not Matching Final Print
Sep 26, 2012Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
Lightroom :: Print Settings Are Not Stored In The Print Preset
Apr 13, 2012It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
Lightroom :: How To Batch Print Different Orientations Or Print Sizes
Jun 6, 2009How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
Lightroom :: Print One Button In Print Module Of LR3 Not Activated
Mar 13, 2013My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View RelatedPhotoshop :: Upgraded To PS7...
Aug 29, 2002When using the pen tool in PS 6, you just make those dots wich later on can adjust and then turn into a selection. When you do that in PS 7, the selection gets filled with blue and (why ?) becomes...eh, not the same as in PS 6. What am I missing ? I get that it makes some kind of vectormask of it, but I just wan' it to become an ordinary selection.
View 2 Replies View RelatedPhotoshop :: Upgraded To CS4 From 3
Apr 6, 2009PS CS3 had a slew of actions--including many textures and frames. I just installed CS4 and the actions are pretty sparse. I am kind of a novice and would appreciate any advice offered. How do bring in the actions I had in CS3 to version 4?
View 5 Replies View RelatedPhotoshop :: Upgraded To Cs4 Can I Still Use Cs3 On...
Mar 13, 2009I upgraded to cs4 from cs3. Can I continue to use cs3 on another computer?
View 3 Replies View RelatedLightroom :: Print Package Will Not Print As Displayed
Feb 11, 2013I set up a print package in lightroom v4.1 and adjusted the image in the cell to fit properly, however when I try to print to file the resulting file moves the crop to cut off the top of my subject's head. It seems that I can get around this by intentionally moving the image so that it appears to cut off her head, then when it prints it looks correct (the adjustments im doing are moving backwards?). This works for now but I have no specific control over my crop, I just have to guess and check which does not work for large quantities of images
View 1 Replies View RelatedLightroom :: Print 16 X 20 Photo Through Print Module
Jun 29, 2013I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedLightroom :: Why Print Will Not Print Full Image
Mar 14, 2014Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
Lightroom :: 3.6 - How To Print To File In Print Module
Nov 1, 2012I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View RelatedPhotoshop :: EULA Upgraded To CS4
May 20, 2009what I upgraded to CS4, can I still use CS3 under the EULA? I ask this because I have CS4 on my home computer and laptop. I'd like to use CS3 at work using one of my two activations. By EULA, do I give up my activations of previous versions when I upgrade instead of buying a full version?
View 7 Replies View RelatedPhotoshop :: ACR Disabled Since I Upgraded To 5.3
Apr 9, 2009I have the upgrade in the correct location, but now ACR has been disabled in both PS and Bridge. However, in PS, when I look under Help>Plugins, I see it listed there. I have PS CS4 running on Windows XP. I downloaded it several times and removed the older download,(I have only one Camera Raw plug-in in the folder.)
View 1 Replies View RelatedPhotoshop :: Upgraded To CS4, But Can't Uninstall CS3
Jun 25, 2009I installed CS4, and then successfully uninstalled CS3 (both versions as full Creative Suites). I realized, though, that I hadn't saved the actions I had created in PS CS3, so I reinstalled PS CS3 (and found the PS CS3 Actions Palette.psp file, which had my custom actions, from a backup I had made). I exported the custom actions to .atn files, and then imported them into CS4. So far, so good. But..
 Now I can't uninstall CS3! It doesn't show up in my "Add or Remove Programs" dialog (either as the full Creative Suite, or as the individual component programs). I suppose I might be able to solve this by completely uninstalling CS4, which would leave only PS CS3 (and a few other of the CS3 programs, which were also reinstalled) -- and then maybe it would show up in Add or Remove Programs.
 (And then I could -- I hope -- uninstall CS3, and reinstall CS4.) But if someone has a simpler solution, I'd greatly appreciate hearing it! To summarize the key actions, here's what I did:- Already had Creative Suite CS3 installed- Installed Creative Suite CS4- Uninstalled Creative Suite CS3- Reinstalled PS CS3 and a couple other CS3 programs- Exported some files I needed from CS3, and imported them into CS4- Now I can't uninstall CS3.
