Lightroom :: Unable To Edit In CS4 From 3.6?
Feb 1, 2012
my "Edit in Photoshop" option no longer works for RAW images. Photoshop pops up, but the image doesn't, no prompt or anything, just an empty workspace. The process still works for .psds or jpegs (I can "edit in PS" from LR)
I mistakenly downloaded the latest version of LR 3.6 without reading the fine print (stupid, right?) - apparently Camera Raw 6.6 is not compatible with earlier versions of PS than CS5, but LR 3.6 needs CR 6.6. I guess I made the mistake of assuming that CS4 wasn't so old that Adobe would come out with a Camera Raw update that wasn't compatible with it. So I've got to assume this is my problem and I'm just a bit irritated. Is my CS4 seriously that outdated?
Would you recommend that I revert to an earlier version of LR and CR and stick with my CS4, or just bite the bullet and get the updated CS5 (I really didn't want to spend the cash at the moment). Or am I wrong about the Camera Raw 6.6 issue and is there another reason I can't move my images into PS?
View 1 Replies
ADVERTISEMENT
Dec 12, 2011
I am using Lightroom 3 on my Mac. I have been unable to switch from Lightroom to "Edit in Photoshop" when I go to the "Photo" menu - the words are just not highlighted. I have tried to access this through Library and Develop.
View 3 Replies
View Related
Oct 10, 2011
I recently built a new PC dedicated to my photo work.
i7 2600k, 16gb DDR 3 ripjaws, 128GB crucial m4 SSD, (2) x 1TB 7200 HDDs (mirrored), Sapphire Radeon HD 5570.The first month or so of use LR worked great. However, recently I have been getting several errors and oddities.
1) Randomly closes. I can restart it without a problem and pick back up where I left off. There are not warnings or signs that it is about to close.. it just does.
2) "Unexpected end of file". Unable to edit photo. Preview does show, however. I have never seen this error before on other machines.
3) Memory dumps. I assume this is related to LR3 as that is the only program I am actively using when it happens (Chome is always open as well, however) I will have the dump files examined to know for sure.
4) Something new that just started today. In the preview bar on the bottom, as I scroll through the photos I see the previews of other photos.. some photos from other folders I took weeks or months ago. When I hover over the image it changes to what it should be.1 with a photo from this particular shoot and one from one I did over a month ago. Everything I scroll back and forth (rapidly or not) as the previews load it loads the wrong files first, multiple times (around 8 or 9 in a row) and then they slowly change to what it should be.
I am not sure if I am properly describing this error but it is really weird.Also, this seems to only happen on the images off a CF card. I was borrowing a friends D200 as a 2nd body for a party. When I scroll through the images off my SD card I do not see the issue appear. When I get to the CF portion of the folder is when I see the problem..I just updated LR today but these issues occured prior to the update and still exist afterwards.
Do I need to do a fresh install of LR?What precautions do I need to take in doing so to insure my catalogue stays intact?
View 4 Replies
View Related
Apr 2, 2012
I was trying to play around with the software to get to know it, and... well, I think I made something weird in it. Everything was flowing nicely when I was following the tutorial about Editing Objects: I created a box, I selected that edit poly option from the modify tab and I could edit vertices totally nicely.
But then, I really don't know what happened, but, I don't know exactly when, I suddenly could not move the vertices AT ALL. They are pretty visible, but when I select them, they turn red and the axis are not editable! I'm so confused! I can edit the axis very normally if I'm using an option like Select and Move but... With the edit poly thing I just cannot! I tried everything I thought of: Made a new box, restarted the program, restarted the PC! But NOTHING worked.
EDIT: It took me almost an hour to figure out I wasn’t selecting the Select and Move tool!
View 3 Replies
View Related
Dec 16, 2013
I'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
View 2 Replies
View Related
Dec 4, 2008
I have a .psd document but I am unable to select all the layers/elements to
resize. The banner was made a little too wide and I'm trying to void
recreating it entirely.
View 10 Replies
View Related
Jul 31, 2013
My IT have just upgraded my pc system means to reinstalled my 2008LT. now i cannot edit my text. the MText bar will appear on my top left corner and best .
View 9 Replies
View Related
Jan 8, 2014
I wish to create a testing surface for simulation from a DSM height data (under a college assignment). I downloaded a height data from [URL]........ in a .dwg file format and want to import in on maya and create a surface out of it.
I am using maya 2013 on windows OS.
View 5 Replies
View Related
Nov 12, 2013
My titleblock seems to be corrupted and I can't edit it. I need to edit some text on it (highlighted), so when I am on the sheet view in the project I select the titleblock and click 'edit family.'
When I load it into the project I get this error. I would happily create a new titleblock, but I this is used in many places, so I need to edit this one. I tried to upload my Revit Error Report, but this forum is saying it is not a valid extension.
View 8 Replies
View Related
Aug 9, 2013
I opened a file that was saved as .ai but I am unable to edit it. It's as though it was saved as a pdf (or similar uneditable document). It still has 2 unlocked layers. Why did it save that way and how do I fix it?
View 2 Replies
View Related
May 14, 2013
I'm having issues using edit and adjustments while in actions..
View 2 Replies
View Related
Dec 2, 2013
I've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?
View 2 Replies
View Related
Oct 16, 2011
I have VideoStudio XS4 Pro and it freezes when I try to edit a MPG4 video. The source video is from the Flip video player. I have been able to edit these without any problems before. This time when I put the video in the edit window I can start to play it, but then the UI stops working. It beeps when I try to press any button.
I'm using Windows 7. (see my machine profile) I have applied latest updates.
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
At this point the software is unusable.
View 5 Replies
View Related
Feb 11, 2012
I cannot edit or adjust photos at this time. the program come up ok but when I click edit there is no picture there. It is the same on adjust. Not sure if I unclicked something or what.
View 5 Replies
View Related
Jul 25, 2011
have been looking at various posts regarding audio skipping but am clueless as to how to repair or use this program successfully. I am able to import a simple mp2 file off a DVD (VOB), scan into scenes and usually play it in the timeline without skipping. I can play an mpg clip/scene, at least once, without skipping. Any kind of editing of any file results in skipping. Whether I save as a project or not, it skips. If I export, it skips. With or without Smart Proxy, it skips. With or without SP2 (after a clean reinstall) it skips. I have been editing for at least 7 years with various programs, but this is truly a first. I am really hesitant to upgrade to X4 as a fix, fully expecting it will be more of the same.
I want to clarify something. I listened very closely with a friend and concluded it is not exactly skipping. It is truncated repeating of a word in close succession, so you will hear a word immediately followed by the same word repeated but partly cut off.
View 5 Replies
View Related
Apr 17, 2008
editing the text in a web page template that I downloaded from a free template web site. The page is .psd file, I opened it in photoshop ver 6, went on to those layers which are having text. the layers clearly denotes T , I double clicked on T but as per tutorial I read on a web site, the text is not highlighted or selected, instead the blinking cursor comes over that text and when i try to write something it overwrite the new text over the previous one and previous text is as it is as its before.
I also tried to edit the text by going on vertical tool bar, clicking the T button, and then double clicking on the required text but it also doesnt work. After going through couple of tutorial websites and reading it, I came to know that text layer might be rasterized, I checked in the main menu, the layer is not rasterized and clearly show the letter T.
View 5 Replies
View Related
Aug 4, 2004
I'm having an issue with editing layers copied from one file to another in Photoshop CS. It seems to be essentially locking the layers and I can't figure out how to unlock them. I've tried duplicating them, renaming them, and resetting my tool preferences (I'm desparate and frustrated). They are in the same mode. This also tends to be an issue with opening a .jpg or .gif file and trying to edit it.
it seems the issue was my computer had the user permissions set for read/write only. Once I changed it so that all users had all permissions I was able to edit it.
View 1 Replies
View Related
Oct 4, 2008
I've opened a photograph in CS3 (whereas the photograph is the background layer), and subsequently tried to use any of the tools (clone, eraser, etc) for editing with no success. Everything appears to be working properly with the tool bars, but when you click on the image to use it, nothing happens.
I thought maybe it was an issue with the layer being locked, but I've tried copying/pasting the image as a new layer in a new file (layer is unlocked at that point), but it still doesn't work.
View 9 Replies
View Related
Jun 9, 2013
why are we not able to edit layers outside the canvas?
I often create images were the canvas size is fixed (e.g. display resolution). I then add layers to it that are often larger than the canvas. I would now want to select the superfluous parts of the just added images (e.g. to make them transparent), but I can't select parts of the layers that are not on canvas!
I also can not see any layer content that is off-canvas. A workflow I'd prefer would be copy everything somewhere (not necessarily inside the canvas) and then align it layer by layer, which is hard when one can not see the content of the off-canvas layers.
View 6 Replies
View Related
Sep 5, 2012
I use 2.8.2. I have some words on a picture, in a text layer. I didn't make anything with the text, it is pure text. I want to edit it. I open the layer and click on the text. As soon as I click, I get a new text field, and if I write something, a new text-layer opens. The old one is untouchable. What can I do?
Here is a screenshot:
[URL].......
View 2 Replies
View Related
Aug 10, 2013
not able to edit brush features in gimp 2.8; options are not editable...
ubuntu 12.04...
View 3 Replies
View Related
Feb 24, 2013
I can not edit photos.When I try, a window pops -up "Licensing for this product has stopped working". Error :150:30. What do I do?
View 1 Replies
View Related
Apr 8, 2013
The layers - which are clearly separate in photoshop - are compressed in elements, thus unable to edit.
View 1 Replies
View Related
Jun 29, 2011
A customer sent me an RGB bitmap with a transparent background. I converted it to a grayscale and I erase it in PhotoPaint but can't paint over it. This isn't the original bitmap, I converted it and assumed that would get rid of any clip masks or other attributes.
Here's the bitmap as a JPEG.
View 7 Replies
View Related
Jul 4, 2012
I am using 2013LT. It crushed yesterday. Today when I opened my drgs. I can not edit text, delete anything. I also have noticed that menu under right click does not have the same options as before ie. block edit is not there and so on. I have opened differend dwg ones that I wasn't working on when it crushed and the same thing happed.
I opened my drawings with 2012LT and everything works fine.
View 2 Replies
View Related
Dec 13, 2012
Civil3D - have surface from contours (plines), breaklines, etc. Have been able to edit TIN to add points or move them in the past (I think). Recently, I can't add or move points through the TIN edit. I'm guessing something I changed (maybe recent update), variable, etc
View 9 Replies
View Related
Mar 15, 2012
I created my own tools of own content on my own pallets and then found . you can drag a whole tab into the browser to quickly archive your tools. Having reinstalled I have 'dropped the collections back to ACA12 and all my tools restored.
However I can no longer edit or add to these tool pallets. I cannot edit any properties within tools either. There is no lock symbol on the pallet that I can see, only a refresh symbol.
The .atc file they reference (found from the Content Browser location they came from) is not set to read only. Permissions seem to be set to allow read, modify, write etc. I first used the 'My Tool Catalog' provided but also copied it all back to a new catalog but it's still locked.
View 2 Replies
View Related
Sep 27, 2011
I successfully created multiple hatch regions in a sketch on a section view in a drawing. I want to change or delete one of the hatch regions, but am unsuccessful. I clicked on Fill/Hatch Region and then selected the region that already has a hatch defined, but the dialog box does not show that these is a hatch defined.
If I click the hatch button it creates another hatch over the top of the current one and does not allow the current one to be deleted or changed. Of the four regions in my sketch, one works and the other three do not.
View 2 Replies
View Related
Jan 25, 2012
I have a problem to edit the dimension with autocad 2012. When i try to double click on the dimension text, i have a error message. This command doesn't exit.
View 3 Replies
View Related
Jul 19, 2012
I try to edit the table of an iPart via a spreadsheet (EXCEL 2010) and it does not launch EXCEL. I saw other posts with changing the registery and I am not too confident on what to remove or even how to do it.
View 6 Replies
View Related
Sep 18, 2013
I cannot edit any block attributes in my drawing. When attempting to do so, the command line states: "The object is on a locked layer". All of the layers in my drawing are unlocked, on and not frozen.
View 2 Replies
View Related
