My side panels (Navigator on the Left, Histogram on the right) have gotten larger since I restarted my laptop. It's really interfereing with my ability to edit because there's so little screen space left. I've tried everything I can think of, and they're still too big on either side.
View 1 Replies
When I place my mouse over the the left edge of the right side panel I get <---> which is good then I try to drag to make the panel wider and it does not work. I can shrink the panel but not expand it.
In any module this is how it works. I also tried using the alt key (PC) to drag it wider but no go. You should be able to use just the <--> to expand.
I know in other versions of LR I could make the panel very wide but no longer, it only goes wide to a certain point that won't go any further cutting off the last few remaing characters on the far right side of the panel.
way to increase the contrast ratio on the side panels. for us seniors reading light grey on dark grey is very difficult?
View 2 Replies View RelatedWhen in the Library module, when I press tab or shift tab to make the side panel(s) go away, the background is white and I would like it to be black. How do I make this change? Also, in "Lights Out" (pressing L) the background gets lighter instead of darker. How do I change this to darker?
View 2 Replies View RelatedHow do you make the side panels lighter - the text is almost unreadable - the side panels are so dark
View 3 Replies View RelatedConstantly surfing back to the same locations. I cant find a way to add shortcuts to that large white spoace along the left side, which would be uber usefull. Is that possible?
View 3 Replies View RelatedIs there a way to show different images side by side in the edit view. I need to edit an image to match it to a base image. while viewing the images side by side.
View 6 Replies View RelatedHow many panels there are in the web module of Lightroom 4.3 - 6 or 7 - I have 6 only panels, but it seems that I'm missing a seventh - The "appearance" panel or "aspect" in french?
View 4 Replies View RelatedI have looked on the web and in some books I have and I don't understand the purpose for turning panels on and off or what it does. I see that the features are unusable when they are off. I understand why I would want to hide a panel.
Does it turn off any changes I made using that certain panel? What does it do?
Yesterday I have installed the lightroom 5 upgrade, so the view of the surface has been changed.
Is it possible to scale the control-panels like in lightroom 4 ?
In view of my poor English skills it is easyer to show some pictures
Lightroom 4 vs Lightroom 5:
(It is not possible to resize the with of the panel groups smaler than this.)
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies View RelatedCan I enlarge text in lightroom work panels as I have eyesight probs.
View 2 Replies View RelatedThis after I restarted lightroom 4. I do not want to lower the resolution of my screen to use Lightroom. I have a new 27' Imac. I do not want to get an even larger screen. Is there a solution or should I just use another program ?
View 5 Replies View Relatedall my sliders disappeared on the develop how do i restore them like temp, tint, ect stupid i cant do this solo
View 1 Replies View RelatedThe grey text on black background is fine on my home computer but my little laptop screen, especially travelling with some sun glare on it, is very hard to read. I had hoped to do lots of editing while travelling but have eye strain instead. Can the panel background color and text color be changed to something with more contrast or does Lightroom have other "skins"?
View 5 Replies View RelatedIn the develop module, my adjustment panels just stop working. Sometimes in the middle of an adjustment, other times they won't even open. I've tried deleting the prefs. file numerous times. I have them checked for solo mode, but it doesn't make a difference. I'm using 5.3 on Windows 7 and I don't have this problem on my Mac.
View 11 Replies View Relatedhow can I retrieve my basic developing panels it just disappeared?
View 4 Replies View RelatedJust recently I have found that I cannot independently control the Module Picker and Filmstrip panels. They either both show or are both hidden. I have tried shortcuts and rebooting, but nothing works.
View 2 Replies View RelatedLightroom 5 - in all of the panels starting with Basic all titles are showing "Reset". For example, Tone is now showing Reset Tone - Resent Presence.In all panels the titles are showing "Reset".
View 1 Replies View RelatedIn LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
I have been using Lr 5.3 to adjust some RAW images. My Develope pane is now missing the pane for White balance, hue and also the pane for Exposure, Contrast, highlights etc adjustments. I don't know how this happened or how to restore them. I am using iMac.
View 3 Replies View RelatedWS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedThe problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedI need to put two pictures side by side to merge one person into a group shot. I had it once, but, the image of the one person was too big, and I could not figure out how to put that picture back and get another one to try.
View 1 Replies View RelatedIn Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)
View 7 Replies View RelatedIm having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
