Lightroom :: Preset Color Temp Without Shifting Tint?
Oct 15, 2013
I wish to set presets for certain color temps eg 4900 k 5200 k etc etc, since i am basically down to editing quickly by just clicking on presets.
The only think left i can not do this for is color temp and tint.
Any way i can create presets with just adjustments for temp and tint separately or only both together?
View 1 Replies
ADVERTISEMENT
Feb 25, 2014
I updated my Mac OS to Mavericks. Now in Lightroom 5 I've noticed that in the Basic module the "temp" and "tint" slider buttons no longer appear in color, but rather in the same grayscale as the rest of the slider buttons. They still function normally but having the color appear on the slider worked for me in my workflow. how (or even if) it's possible to get the color back?
View 2 Replies
View Related
Dec 7, 2012
I have installed LR 4.2 two days ago, and have run into a serious problem. When in develop mode, when I click on an image in the film strip, LR opens the image and changes the color temperature dramatically. The blue/yellow slider moves to the far left. I think this is the only change, but didn't check.
The action is not in the history, so I cannot undo it. When I quit and restart, the change is still there. There is no way to recover the pre-existing setting. Can I convert my catalog back to 3.6?
View 10 Replies
View Related
Jul 14, 2012
I am an underwater photographer and white balance is an important issue. I was advised to set the white balance in my camera (Nikon D90) to the color temp of my strobes ( 4800 K) so my subject lighted by by strobes would have the correct color. When I import the RAW (NEF) file into lightroom I would expect that the color temp shown in develop mode would be 4800 K.
Unfortunately it is not. It even differs from picture to picture. I would like to know why and if something can be done about this?
View 16 Replies
View Related
Dec 5, 2012
I am having this problem whenever I synchronize a folder that images have been added into.
Example: I have a folder of images in LR; I export all those images with a watermark, resized, etc. into a separate folder of proofs; even though I performed that batch process using LR, for some reason the app still won't see those images until I synchronize; when I do synchronize, it is shifting the color temp to +8 and the tint to -11; I then have to go back and undo that color temp shift.
How do I get LR to stop changing the color temp of images when synchronizing?
View 13 Replies
View Related
Dec 8, 2013
Lightroom 5.2 I have been trieing to copy and paste settings from one .dng file into the next in the develop module. I tried to copy (shift command c) the color temperature and tint and paste in the other file (shift command v) but nor Kelvin nor green magenta balance changes.
View 2 Replies
View Related
May 31, 2013
Why is there a 'lightroom video preset' under the preset tabs. yet when i open a video file in lightroom and go to the develop modue it says video is not supported in the develop module?
View 2 Replies
View Related
Jul 14, 2009
I'm trying to change the color scheme on a model/figure I photographed, but I don't know how. I've done a search in the help field, but it pulls up a ton of unrelated articles.Example of what I'd like to do: I have a photo of a model jet that is red, black, and white. I want to change the red to blue without changing the overall look of the color. I'm not sure how to articulate this, but I want to maintain the hue, saturation and variation in the color. If I select and delete the red, then fill the area using the paint bucket the new color is flat and uninspiring.
View 6 Replies
View Related
Nov 6, 2008
I've seen color gradations in the tint sliders (which makes selecting exactly what color hue you're shooting for easier). Is this a feature only in CS3 and above (just like the histogram display in the curves palette)?
View 1 Replies
View Related
Mar 30, 2013
There is a specific CMYK combo of red I created that I want to use to tint a photo. How do I do that in the "proper" way?
View 8 Replies
View Related
Jun 19, 2012
When I import my raw files from my 5D mark 2 my white balance is set to 5200K, when in Lightroom it shifts to 4850K?
View 6 Replies
View Related
Dec 17, 2012
We get artwork from outside agencies with color boxes like those shown (CMYK, in percentages of 30, 50 and 100). Their color names may vary, or often the colors aren't in their color palette at all. I am supposed to recolor the boxes with our standard-named, global colors in my own swatch library. Two questions:
1. Is there a way to grab the three cyan boxes (for example), and recolor them with the global Cyan swatch, WITHOUT having the %tint in all three boxes become 100%?
What I do now, over and over in each file we receive: Select the three Cyan boxes, click on the "C" global swatch in my palette, watch them all change to 100%C. Then manually click on the left cyan box and change the tint back to 30%, and for the middle box, change it back to 50%. Etc. for the other colors. This is a PITA, and it just seems like there should be a quicker way.
2. Is there way to then recolor ALL the cyan elements (strokes, fills, gradients) used in the art with the same global cyan swatch, without changing the tints?
View 2 Replies
View Related
Jun 21, 2013
how do I preview overprinting white ink (spot color) or a tint thereof?
View 13 Replies
View Related
Sep 27, 2012
I have been trying to mess with and target "tints" via javascript but either I am not understanding something or it cant be targeted as I had hoped, so I am looking for direction and guidance. I have a spot color assigned in the color swatches palette, and have drawn a few boxes on the page using this spot swatch. I then try to alter the tint using JS code.
sel[i].tint = // whatever number
alert(sel[i].tint) // This alerts fine
The alert shows a change taking place but it never gets applied to the item, the actual item never gets changed. I know things are properly targeted as I can change other attributes fine. When I look in the JS documentation it just shows for when creating a new spot, not for ones that already exist on items, I cant seem to find an example otherwise.
Can tint be adjusted for items on the page that have a spot color applied?
View 8 Replies
View Related
Feb 12, 2012
in PS, I can use the gradation curves with a pipette tool, looking for black, white and grey areas and remove tints from old photos and slides that I have scanned. In LR, I also have gradation curves, but the very useful pipette tool seems to be missing. Is there a way to enhance the photos as easily as in PS?
View 2 Replies
View Related
Jan 2, 2014
My lightroom 4.4 does not show wb temp in degrees. Does LR 5 ?
View 1 Replies
View Related
Oct 12, 2013
Wheever I try to use my adjustment brush in LR 4 I get a red tint as I apply what ever adjustment I'm trying to do.
View 1 Replies
View Related
Dec 4, 2013
In LR4, I was quite attached to the easy-to-use temperature and tint controls in the Library module. Now, in LR 5, those seem to be gone and I find the sliders in the Develop module much less handy. Is there some way to get the other controls back?
View 3 Replies
View Related
Jan 1, 2014
Take a look at the attached photo - on the left is a black and white photo I exported out of photoshop after desaturation but opened in pictire viewer. On the right is the same photo as viewed in photoshop - again after desatuation to convert to black and white. My monitor is calibrated and photos opened in picture viewer or other simple programs look correct - but in lightroom or photoshop they have a tint. How do I remove this?
View 20 Replies
View Related
Dec 10, 2011
Using Lightroom 3.6 RC I have a problem when printing to a file. All of the jpgs created are covered with a vivid red coloured mask/tint.
View 7 Replies
View Related
May 30, 2013
I'm using Lightroom 4.4 on Mac.
Having an issue where all brushes and graduated filters are adding a warm yellow tint, no matter what the color settings are for the brush. The tint persists, even if I convert the image to B&W within Lightroom.
View 6 Replies
View Related
May 6, 2013
In Paintshop Pro X5 Is it possible to change the color of preset shape like arrows. Or is there another way to make arrows in different colors.
View 1 Replies
View Related
Jan 4, 2012
Is there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
View 4 Replies
View Related
Oct 16, 2013
I recently learned using presets in LR. I currently use LR5.2.
I recently installed a few third-party presets to LR.
I am very happy with the performance of these presets.
Here is a problem: I have many LR catalogs.
Is there a way to install all presets to catalog whenever I create new one (just like a default preset) and also to old catalogs?
View 4 Replies
View Related
Jan 27, 2014
how do you create a preset in LR 3.6 to be used in the develop module?
View 1 Replies
View Related
Oct 18, 2013
I currently use LR5.2. In camera calibration panel, there are a few options for camera profiles, e'g., camera landscape. I created a "camera landscape" preset, which did not work. It seems that there are some missing checks in "new develop preset" box. As seen in the attachment, i placed checkmarks only in front of "process version" and "calbiration". This was not enough. It seems that the box might need more checkmarks to produce a workable landscape preset.
View 13 Replies
View Related
Nov 24, 2013
I am trying to find my way, of how to submit my photos to the external lab for printing. Print module is kind of useless for me - the page setup is printer driver dependant and none of my installed printer drivers allows me to define borderless print and so LR does not allow me to set margins to zero. I think, that such desing limitation is pretty strange, especially if you just want to print to the jpeg file.
So - then I moved on to the crop tool. What a bunch of inconsistencies and design limits:
- LR seems to use some kind of catalog dependant storage, instead of just some for e.g. custom XML or other kind of list
- LR mysteriosly remember your last 5 settings. If you do a mistake, you need to reenter all of them again
- you can't even name your custom ratio settings - that's imo pretty much insufficient
- I need to set precious ratio setting for the Noritsu machine, so that I get exact resolution. Good for two of my settings, but when I try for my 13x18cm (2268 x 1625 pix), LR deletes my custom setting and marks 5x7 for me. But it is off by 10 pixels on one axis! Some strange rounding and matching was applied, but I can't it set exactly to what I need. Why does LR mess with what I want, if I select custom ratio?!
So I thought, that I might make a preset. I noticed, that when you copy setting from an image, there is a crop section. But - exactly the same dialog, which allows us to save settings, does miss a crop section. What a bummer! I found xy requests, where ppl were asking for the functionality few years ago. I am very negatively surprised, that it was yet not granted for implementation, especially as some of crop tool facilities are pretty arcane at best.
What I am now thinking about is to prepare three model images, make separate folder for them, and use them as a source for the cropping setting to copy from, but of course I would like the crop functionality to be enhanced/fixed.
View 6 Replies
View Related
Jul 20, 2012
Is there any way to stack preset filters on photos?
I remember back in Lightroom 3, you could select some filters, like Cold Tone, then select another filter and would apply itself on top of the Cold Tone filter.
Now, it seems in Lightroom 4, every time you select a filter, it completely overwrites all the settings of previous ones.
View 7 Replies
View Related
Feb 12, 2014
I have imported a preset and want to use it on several photos in the same folder. How do I do this? I cant seem to see the option when I try to sync them.
View 9 Replies
View Related
Jan 2, 2013
I want to edit an export preset and in this example I want to remove the check mark to "Add to This Catalog". How do I "save" this change to that preset?
View 3 Replies
View Related
Nov 6, 2012
I just finished editing 300 photos and im not sure how but selected apply all on a preset to all my photos, I try hitting cancel and undo but it wont stop changing all my weeks worth of editing.
View 2 Replies
View Related