Lightroom :: How To Print From 10x15cm Slot Instead Of A4
Sep 19, 2013How do I print from a 10x15cm slot instead of the A4?
View 1 Replies
ADVERTISEMENT
Lightroom :: 4 Print Module - Print And Print One Tabs Greyed Out
Nov 25, 2012In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View Related3ds Max :: How To Make A Texture Slot Empty
Feb 23, 2011In Max, you used to be able to void out a texture by choosing None to replace Noise or a bitmap in a texture slot.
I don't see a NONE option in the latest material/map browser. How do I do this?
AutoCAD Inventor :: Constraining A Hole To A Slot
Mar 26, 2012Is there a way to do this? 2 parts, 1 has a hole in it and the other has a slot. I want to constrain the center of the hole to the center of the slot. How do I do this?
View 9 Replies View RelatedAutoCAD Inventor :: IFeatures - Producing A Slot
Jul 23, 2012I am trying to produce an iFeature that can be used as a punch/slot within a sheet metal component.
I have had minor success creating basic dimples before (simple revolved features), but this time I require a more detailed feature. I haven't been able to produce this part (see attached) as an i Feature. I believe it is because I have used a loft.
What alternatives are there? (I feel if I could get a good grasp on the limits of iFeatures that I could really make my modelling more efficient and versatile).
3ds Max :: Environment Map Slot - Not To Show In Actual Render?
Oct 17, 2012I have a hdri image in the environment map slot that I want to use for illumination and reflection purposes but I don't want it to show in the actual render, is there a way to do this? I've tried adding the hdri to a skylight but it doesn't give the reflections. I'm using mental ray by the way I know in vray you can use a map for overall reflections and one for overall GI is there a similar way for Mental Ray?hide in actual render?
View 1 Replies View RelatedAutoCAD Inventor :: How To Constrain Movement In Slot
Jan 9, 2013I have one problem and I would like to get your opinion how I could solve this.
I can't share models I have problem with, but I made another with the same problem.
I have two parts - one with slot, another with "pin". How to constrain the "pin" to always move in slot?
I had some ideas but non of them worked for me:
1. Use the Transitional constrain came first in mind, but it gives unsuspected results in this situation. Pin part is jumping around and ends up contrained in another place ir should be.
2. Contact solver kind of do the job, but it works quite bad. I gives no control or accuracy (i can not control how much pin is moved out)
3. I even thought of point on 3d sketch constrain, but it can not be done
How you would suggest to constrain the movement? I hope I stated problem clear enough.
I attached model files. I use Inventor 2013
AutoCAD Inventor :: Translational / Rotational Constrain For Pin In Slot
Aug 15, 2008How do you constrain a pin so that it can translate/rotate within the boundaries of a slot?
View 9 Replies View Related3ds Max :: Add Multi / Sub-Object To Slot In Material Editor - Everything Unresponsive
May 6, 2013Design 2012 and 2013 has been giving me problems in the material editor.
System Specs:
Win 7 Pro 64
AMD FX-8320 Black Edition
16GB Ram
GTX 660 GPU
Sabertooth 990FX
Max Design 2013 R6
Nitrous
Basically, when i add a sub-object to a slot in the material editor (Using Mental Ray)nothing happens right away, so I have to do it again to get it to show up in the material editor. When i do get it to show up the slot looks all wrong and distorted, everything is unresponsive. I can save the scene and restart Max and everything will be ok, but as soon as i try to add another Multi material to another object it happens again. This was happening also prior to updating to R6 which i did last night. I've read a post about the same thing for 2012 but there was no solution.
I just tried it with Direct3D rather than Nitrous and did not run into this issue (using default Scanline).Just switching to Mental Ray and changing the standard material to MR A&D made the program unresponsive again. I'm starting to think it's MR that is giving me issues. Upon closing Max i get an error message saying that an error occurred and the program will close.Just switched to OpenGL and tried it with MR, still getting the same results.
AutoCAD Inventor :: Center Line On An Open Ended Slot
Oct 7, 2013how to put a center line on an open ended slot. Say in the front view you can see the radius of the slot with horizontal tangents running to the end of the object; this isn't the problem. When creating the top view, you only see one hidden line indicating the arch, but the other side is just open to the end. You have no means of finding bisectors.
I've added a jpg file, looking for the center line in the top view.
AutoCAD 2013 :: Hatch Pattern Gradient Slot Looks Black
Oct 31, 2013My autocad hatch pattern gradient slot appears black suddenly i can't see any colors in these slots. See attached JPG of AutoCAD 2013 hatch diag screenshot.
View 2 Replies View RelatedAutoDesk Smoke :: Empty Slot In Action Media List?
Nov 16, 2012in media list in action module, if i add new input/media, it will add new items in the list. Now the problem is when i delete the media , there will be empty slot (slot where media has been removed) in media list. Why can't i delete this empty slot ? can i have a clean media list ?
View 6 Replies View Related3ds Max :: How To Drag / Copy A Material From The Slate Editor Into The Environment Map Slot
Sep 24, 20111) Is there a way to drag/copy a material from the slate editor into the Environment Map slot in the Environment/Effects dialog box?
Or
2) Is there a way to put a non-assigned material from the Slate editor into a slot in the Compact Material Editor?
I'm trying to put a Env/Background Switcher into the Environment map slot. I FIRST created the Env/Background Switcher in the slate editor (this is simply the order I worked in and found I couldn't go further).
However, from the Slate Editor, I can't copy, drag, or assign this material, whether to the Environment dialog box, an object in the scene (objects won't accept the Env/Bkg Switcher), nor to a slot in the Compact Material Editor. Perhaps I'm missing a button click or a command someplace?
The only way I can do this is to rebuild the material in the Compact Material Editor (start with a clean Env/Bkg Switcher), or click in the Environment Dialog box's Environment Map slot and start by choosing an Env/Bkg Switcher.
* * * How can you simply go from the Slate Editor to the Environment map slot?
AutoCAD Inventor :: Put Angular Dimension From A Hole To Slot Positioned Planes
Mar 26, 2012I am trying to put an angular dimension from a hole to a slot positioned planes 90degrees to each other. How can I achieve this? Typically, it depends on how it is put into the ipt file but I didn't know how else to put the slot in therefore only a point was put in at that angle.
View 2 Replies View RelatedLightroom :: How To Create A4 Borderless Print In Canon Mg6150 From Within Print Module
Nov 1, 2013I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
Lightroom :: Switch To Print Module And The Print Review Is Now Blank (100% White)
Jan 7, 2014All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
Lightroom :: Setting Print Size To A3 Or Bigger Using 5 For Printing At Print Shop?
Feb 28, 2014I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedLightroom :: How To Reset Print Template Screen In Print Module
Apr 1, 2012I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedLightroom :: How To Add (almost) White Border Around Photo(s) To Print In Print Module
Oct 14, 2012How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
Lightroom :: Print Doesn't Show A Selected Photo And Won't Print
Oct 13, 2012How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedLightroom :: Print Layout Not Matching Final Print
Sep 26, 2012Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
Lightroom :: Print Settings Are Not Stored In The Print Preset
Apr 13, 2012It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
Lightroom :: How To Batch Print Different Orientations Or Print Sizes
Jun 6, 2009How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
Lightroom :: Print One Button In Print Module Of LR3 Not Activated
Mar 13, 2013My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View RelatedLightroom :: Print Package Will Not Print As Displayed
Feb 11, 2013I set up a print package in lightroom v4.1 and adjusted the image in the cell to fit properly, however when I try to print to file the resulting file moves the crop to cut off the top of my subject's head. It seems that I can get around this by intentionally moving the image so that it appears to cut off her head, then when it prints it looks correct (the adjustments im doing are moving backwards?). This works for now but I have no specific control over my crop, I just have to guess and check which does not work for large quantities of images
View 1 Replies View RelatedLightroom :: Print 16 X 20 Photo Through Print Module
Jun 29, 2013I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedLightroom :: Why Print Will Not Print Full Image
Mar 14, 2014Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
Lightroom :: 3.6 - How To Print To File In Print Module
Nov 1, 2012I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View RelatedLightroom :: How To Print From The Print Module
Dec 6, 2012A few weeks ago I tried to print from the print module and instead of a picture showing up, there was a white space. I have uninstalled and reinstalled LR 3 times.
View 2 Replies View RelatedLightroom :: How To Print JPG From Print Module In 3.6
Dec 27, 2011When I try to print a JPG from the Print module in LR 3.6 (and tried it also with 3.5), it does not always recognize the resolution settings. Most of the time (and I can't see what makes the difference) it prints the JPG to a 96 ppi resolution regardless of what setting I use for resolution.
View 6 Replies View RelatedLightroom :: Can't Print From LR5
Jun 11, 2013I'm trying to print a test print before I print a 13 x 38 panorama. I don't know yet if anything will print as I want, but here's what I've spent time thrashing on with this print:
Mac os 10.8.4, latest Epson drivers, Epson 3880. I've got this set up as a custom paper size, and it's in the rear paper slot, since it's a heavy fine art paper. Color managment is using a custom profile I made. When I click "Printer," then do the setup, then click "print," I get progress in the upper left that says "Rendering..." Then the printer driver briefly pops up in the dock, then disappears. The paper is loaded, and the printer sits there saying "ready." It's connected and online, and I can see the ink levels in it.
If I try to print a PDF from the same print dialog, I get a pdf that looks as it should. If I print to a jpg instead of to Printer in the Print Job settings, I get a jpg that seems as it should.
I was just printing to LR 4 using these same settings the other day.Yes, I have reselected the printer in the drop down menu.
