Lightroom :: How To Open Manually Saved XML Data
May 28, 2013
My assistant and I work simultaneously from different laptops (and, therefore, different LR catalogs), and I'd like to be able to transfer the 'Develop' changes she makes to the RAW images in her catalog to the same RAW images in my master catalog. I figured one way to do this is to manually save the metadata from the RAW images she works on and apply that metadata to the same RAW images on my computer. I've successfully exported her metadata as .xmp files, but how do I open that data in LR on my computer so that it applies to the images in my catalog?
View 1 Replies
ADVERTISEMENT
Jul 9, 2013
I just downloaded the LR4.x -> LR 5 installer from this website, but I can't install it. Each time I try to extract the installer, it fails. I downloaded it 5 times, using 3 different browsers... It does not fail exactly at the same moment (12%, 32%, 23%) but il fails anyway.
I also tried to open the package with winzip, and extract the file manually. Same thing, files can't be extracted as they seem to be corrupted.
View 6 Replies
View Related
Mar 12, 2013
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies
View Related
Mar 10, 2014
When I add location data to my JPG images, that data is not saved with the picture. Viewing the picture in OneDrive does not show the location, it only shows in Photoshop Elements Organizer. How do I get that data into the file?
View 1 Replies
View Related
Feb 25, 2012
How to plot (draw) the xy data saved in a CSV file?
I’m not sure if there is an enhanced workflow to plot the xy coordinates saved in an CSV file in the AutoCAD 2012.
I found the approach below in the web
----------
1.Open the Excel file.
2. Save it as a .CSV file (comma separated values).
3. Open the .CSV file in notepad, add two lines at the top:
._multiple
._point
4. Then save this file with a .SCR file extension.
5. In AutoCAD run the ._Script command, and pick the .SCR file above.
View 3 Replies
View Related
Apr 11, 2012
How to sort images manually in Lightroom.
Before an import I try to drag around images and they don't drag.
After an import, I try to drag around images and they don't drag.
No images are selected. I'm at a loss.
View 4 Replies
View Related
May 13, 2010
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
View 9 Replies
View Related
Jun 3, 2012
I created a Web Gallery and forgot to update the folder name for the FTP server.
How can I update the saved gallery? If you change module and double click again on the saved gallery icon, the changes are lost.
Here is what I get via right click:
How do you solve this without the need to delete and save the gallery again?
View 5 Replies
View Related
Dec 8, 2013
I have recently downloaded Photoshop CC, Bridge and Lightroom 5.2 64 bit and am suffering with terrible performance issues. Initially both photoshop and lightroom worked really well but after only a couple of days and only a few hundred images being imported into lightroom I can no longer use lightroom.
The computer works fine prior to me opening lightroom, I can use all programs, open files and folders with no issue. However as soon as I have opened Lightroom then the whole system grinds to a hault. Lightroom is unresponsive and the rest of the system practically freezes, it took over an hour to open a folder containing roughly 100 JPEGs. When closing the laptop I have to manually close background programs because they are also unresponsive.
The computer has 6Gb RAM, 500GB HDD and a dual core processor so there is ample power to cope with this program on my system.
View 2 Replies
View Related
Jan 2, 2014
My spot removal tool in Lightroom 5 does not appear to be working correctly. When using the tool, it does not show the second circle indicating where it is sampling from and, therefore, I cannot manually move to sample from another place. Do I need to reset something?
View 4 Replies
View Related
Nov 14, 2013
We've recently upgraded a large project from Civil 3D 2012 to Civil 3D 2014 and for the most part things have migrated well.
On this project as well as others that have been migrated, I've been noticing this and similar messages re: modified in a previous version when the dref's synchronize:
"FG-STREET A was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized."
The steps we used for converting this project in order are:
Set Data shortcuts working folder.
Migrate Survey Database.
Open/save base drawing containing survey & EG surface.
Open/save all C3d source dwgs before opening any plan sheets.
Open/save all C3d plan sheets.
Because of the warning message I thought I'd try the "Migrating Data Shortcuts" following the instructions.
Use the stand-alone Data Shortcuts Editor to save one or more data shortcuts to a specified folder. If the shortcuts were created with a previous version of AutoCAD Civil 3D, they will be updated to the current format in this process.
When following the steps in the Data Shortcuts Editor, when I get to step 5, select the folder & choose Saveas, I see the following message that they will be saved in 2009 format?
Isn't that a downgrade? How these modified in a previous version messages?
I'm still trying to figure out if they are a benign message or if they are something I should be concerned with. 95% of the shortcuts on the project sync normally & seem to work fine other than an occasional disappearing profile in the sheet profiles.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 7 Replies
View Related
May 31, 2012
Windows 64, i7, 12GB RAM..I don't seem able to create a new folder manually on photo import. This still works fine on the same PC with LR3.6.
View 6 Replies
View Related
Mar 24, 2012
most of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies
View Related
Mar 1, 2009
I am taking a graphic image class that uses Photoshop and Illustrator. I am using CS4 Extended (64 bit, I assume, since I'm running XP 64-bit).
When I save a .psd document in CS4 and send it to my teacher, who is using CS3, she can't open it. She gets the error message "This layered photoshop file was not saved with a composite image."
Fortunately my teacher is cool and has been letting me submit my images in other formats, even though the layers can't be seen.
View 7 Replies
View Related
Jan 15, 2013
I recently scanned in an old photo and thinking I was being clever and losing zero quality, I saved it as a "Raw Data Image" using GIMP.
However, I cannot open it now, GIMP doesn't recognise it, and when I select Raw Data Image in the File > Open dialog, it just shows a garbled image and some sliders/numbers for me to play with.
Can I save my image, or will I have to scan the photo again (after spending months talking the owner into letting me borrow it and scan it in the first place!)
View 10 Replies
View Related
May 27, 2013
All old saved files open OK, last 2 Days all saved files cannot open, but image is on thumbnail tried importing...says cannot import empty file..what have i done?
View 1 Replies
View Related
Apr 15, 2006
I worked for quite some time on a design in Photoshop CS, and I saved the file as: "End Of The World 1.0.psp"...
Now it says that it's an unknown file and I can't open it (because I wasn't thinking and put the "1.0" in the name). Is there ANY way that I can open this file in Photoshop? I really don't want to do the whole thing over again.
View 9 Replies
View Related
May 12, 2008
I don`t save my files after I`ve finished working with them . I named my project 15.05.08 and I didn`t check if everything was OK . A few minutes later I wanted to open it but to my big surprise there were no Photoshop file . There was only a thing that says it`s type is file but I can`t open it in Photoshop . When I try to open it it says " Couldn`t complete your request because it is not the right kind of document .
Is it possible to open it somehow?
View 8 Replies
View Related
Jun 4, 2004
I'm having a problem when I use "save as" after working on a tiff in CS. It ends up in a "file" file that I can't open again. Does anyone know if it's a CS or a XP problem. Or something to do with pretty large files?
View 9 Replies
View Related
Sep 3, 2012
I am running Softimage XSI 7.5 Mod Tool on a Windows Vista 32 bit. I cannot open any of my saved scenes, when I do I get an error.
I have done some research and found two things, one, that using a registry fix for windows is the cause of this problem, and two, that the fix to this error is to run the "runonce.bat" file from the "bin" directory. I used a registry fix recently that not only didn't seem to improve my computers performance, but it also stopped XSI from working properly. Apparently lot's of people have had this problem and the fix is fairly simple.
However, when I ran the runonce.bat file, it failed to work, I ran it again this time with a command to produce an error log, and this error came up on about the 25th line: "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED".
Here's where it get's confusing. I created a second windows user, this one not an administrator, logged onto it, and ran runonce.bat. It did not produce the error seen above and instead, when I run XSI from the second user, I can load scenes just fine. But I log back onto the admin account, and the problem persists.
Obviously I'd like to be able to use XSI from my admin account like normal, instead of having to use an "XSI" account. I am fairly certain that runonce.bat's error "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED" is the reason that runonce.bat seems to have no effect.
View 1 Replies
View Related
Jun 15, 2012
I work in a collaborative environment. I've upgraded to CS6, but those i work with are working in photoshop cs5.1. Will they have problems opening files i create or save in CS6?
View 5 Replies
View Related
Jan 1, 2012
I can't open files saved in X4 in v9. I couldn't figure out the text tool in X4 & saved the file so I could finish in v9 but v9 says it is not a valid PSP file. This is very frustrating since I need to be able to use v9 until I learn X4. Second, I have 64 bit version of Thumbnail view installed but it still doesn't allow me to see all of my PSP files in Windows Thumbnail view.
View 7 Replies
View Related
Feb 22, 2013
I'm in AutoCAD 2013. I've been working on a drawing everyday (was just working on it yesterday), but can't open it now. I just get a blank gray screen when I open if from within AutoCAD. When I open it from my computer drive while AutoCAD is closed, AutoCAD opens and I get "Drawing1.dwg." I've tried the RECOVER command, but I don't get a response. I tried RECOVERALL command which let me choose a file to recover, but it responded saying it could not recover the drawing.
View 6 Replies
View Related
Apr 3, 2008
PS auto updater pop-up. It asked me to update and install something about patch? I don't know what is was then I click "no" or "remind me later". After that everything stopped working. After I restart, everything works fine but PS.
I can open new file and save it. But when I try to open the "saved" one, the "open file" window came and gone so fast. Then the PS 's not responding. I have to close it through task manager.
I removed it and re-install it,
View 3 Replies
View Related
Sep 10, 2008
If I create an image in PS and save it to a JPG or PNG, it will not have that file be the current open file. I flatten the image and click to Save As, but when it saves, the image still has Untitled as the name in the program bar. What's the deal?? Granted, I haven't been using PS-CS3 for long, but in the previous versions, if an image is flattened and saved as a JPG, GIF, PNG, etc, it will then have that file open instead of the original PSD file.
View 2 Replies
View Related
Feb 14, 2007
I am running Photoshop 6. when i open some files that i have created in the past and make some changes to them, then press the save button. I get an error saying
"The file could not be saved because it is in use or was left open"
Photoshop then forces me to save it as another name.
when i try to delete the original file, I can not delete the file from my windows exploror. When i try to delete the file, it tells me that the file is in use and can not be deleted. I get this error even if i close all programs on my computer.
View 1 Replies
View Related
Mar 28, 2012
Everytime I try to open my saved drawing, it just opens autocad 2012 with drawing1. I've been working on this drawing for weeks, and have saved and opened it many times without problem, and was working on it this morning and saved it again. Now, i've come back and it will no longer open. I can open other saved dwg files no problem. I've tried renaming the .bak file as a .dwg but that still won't work.
View 5 Replies
View Related
Jul 8, 2013
I saved a file as a .tif and it saved as normal then I shut down Photoshop and then the PC. The next day when I try to open the file it doesn't open correctly it opens but the right hand side of the photo is on the left and the left hand side of the image is now on the right, its like its been cut in half and put back the wrong way.
It also didn't open with the layers only as a locked background. When I view the file in the icon it looks fine until I open it.
View 3 Replies
View Related
Oct 23, 2012
I saved Raw files to jpeg via bridge but now some of the jpegs won't open in CS5, they only open in bridge? How do I get them to open up in photoshop instead?
View 3 Replies
View Related
May 22, 2013
I could change the file type to psd, they would open.
View 1 Replies
View Related
Nov 30, 2011
I've just reinstalled my window xp which I used it before, but as the result, I couldn't open my saved vsp file at Corel Videostudio pro( I used same software to edit my video), screen say:"file format is not valid" and error no. is 15055:1:1, also I couldn't import my video file of the project to the library, shows: unable to open the file , file not found and I couldn't see all my files' format(such as video, audio etc) in the smart packaged folder. BUT I can still import the video files which I have never used
View 1 Replies
View Related
