I recently updated from LR3 to LR4. My edit in Photoshop preferences are for a psd.
When I "edit in Photoshop" using LR4, Lightroom immediately creates a "filename-edit.psd" file. With LR3, only when I saved from within PS did it create the new file edit.psd file. I like to keep the option open to use "save as" and save just a jpg if I know this is going to be my final edit and not have a psd. Now if I save as a jpg, I end up with an extra .psd file. Is this a change in LR4 or have I not set something that I had set in LR3?
I'm using Autocad 2011 and trying to convert a 2D drawing into 3D using a Loft tool. However, I'm experiencing a bit of a problem. The Loft tool is creating an extra line between the two objects which messes up part of the design. I'm usind Solid and Ruled settings of the Loft tool and the two object I'm trying to join were created out of number of polylines which then were converted into singular poline using Edit Polyline tool.
A simple editable mesh object, a piece of terrain, which has standard texture on it an no modifiers, just some UV's on channel 1.
Whenever I add "edit poly" modifier or convert it to editable poly, additional geometry will be created. Statistics show that only vertex count of the selected object goes up about 6x but no additional faces are generated. This not the case when check on a sub-object level, there are lot of additional faces created. I've never seen this happen, jumping between edit poly and edit mesh has been easy without any errors like this.
I've tried the same model with 2013 as well - same results. Also tried collapsing the object, removing uv-mapping, different materials, attaching the mesh to empty box, etc, garbage collection, exporting it to obj and importing - even then same thing happens.
If I run the action on one file, it works perfect. If I try to run it as a batch, it creates the bmp files fine. But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
I imported 900 RAW images from my desktop into Lightroom, edited them, renamed the filename, and exported them into JPGs. Since I no longer needed the RAW images on my desktop I moved them over to an external hard drive. So now the images are still visible in my Lightroom catalog, but there is no photo to back it up since I moved the original files to the external hard drive. After realizing that I exported the images at 150 dpi instead of 300 dpi I need to re-export the images from lightroon at the proper resolution. But since I moved the originals to the external hard drive there is no photo to back it up in lightroom anymore. So I went to locate the files by clicking on the "?" but since I renamed the file when I exported them, the original filename on the external hard drive is now different from the filename in the catalog. Is the only solution to locate the file one by one? Is there any way I can do them all at once even though the original filename is different from the filename in my lightoom catalog? The original filename is still listed in the metadata, but since the originals are missing it can't change it back.
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD: IMG_0001.NEF ... IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF ... IMG_0300 {shot by John Doe}.NEF
My filename date repeats when I edit the photos in plugins (NIK plugins) from within lightroom. For example, if the file name is 20120402DescansoGardens and I edit in four different plugins, the file names comes back as 20120402-20120402-20120402-20120402-20120402DescansoGardens.
I've just moved back to windows and have an odd thing I don't remember happening before. Every time I open an additional file, a new photoshop icon shows up on the Taskbar (windows 7). The way I remember it working previously, there was only one icon on the task bar regardless of how many files are open.
where can i download the extra for cs6?for example i miss the saturation mask plugin i can find it i'm looking for 64bit here i did not find the plugin i mean the saturation mask[URL]...
When importing an SVG file, I woould like the top level SVG groups to be imported as separate Illustrator layers. Instead, Illustrator creates a single default layer on importing teh SVG file, and adds the tree of groups under that layer.
Is there a lightroom web gallery plug in where it creates a gallery where people can just check the box/like their favorite photos and then I can see what has the top votes?
Setup: Lightroom 4.4 on OSX (Snow Leopard), 24" iMac.
Situation: Imported a large number of RAW files from camera (Canon 5D Mk III) into LR4. Several of the photos are a series of HDR shots that I want to MOVE to their own subfolder. Create the subfolder (HDR) under the date-labelled folder that the files were originally imported into. Select all files in the HDR series, and from the filmstrip, center the mouse pointer over one of the thumbnail images, and then CLICK and DRAG the files over the HDR subfolder.
Well, this where the process fails.while hovering the files over the subfolder, I get the classic "COPY" plus sign, and no key or sequence of keys will change if from COPY to MOVE. If I drop the files as is, they copy over into the subfolder. Ok, this wouldn't be such a bad thing; I can do like any other copy operation, and go back to the original folder and delete the files, right?! WRONG!!! Evidently the copied files are aliased to their originals, and if I delete from either location, they ALL go away. I had this exact problem two years ago with LR3, and had found a solution to it that fixed things so a move was an actual move. Unfortunately whatever I did to fix it went bye-bye with the upgrade to LR4, and yes, I've searched and googled myself silly trying to find the answer again, to no avail.
I've just had to re-install Lr4 - with serial numbers etc - because of a switch to Windows 8. It has however created a new (empty) catalog, whereas I still want to use the existing one with all of my edits on it. Do I now have to work with two separate catalog, or can I somehow move everything to this one? Obviously I don't work with catalog much.
I am working with a device that can import plt files & it converts that to a tool path in G-Code. works like a champ. but some data, most text (single line font), is converted two times. This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.
I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine. I have been working with the export settings with no success.
I am running CorelDraw x5 Graphics Suite on Windows 7. When publishing to pdf on even simple corel files it is saving a pdf size of over 1.5GBs! The screenshot below is a 57 page corel file ALL text and vector with NO bitmaps images. Publishing to pdf creates a file size 1.59GBs. Is there a patch that is out that resolves this issue?
problem: once I activate lens corrections, photos with blue/purple content get a color fringe. Left version below is a 100% crop from the raw file, lens profile deactivated. Right version is a screen shot of the same raw file in the develop mode, with the lens profile active. The color fringe exports into JPEGs - so it does not seem to be a problem of the viewer or the GUI.
I'm using an Alpha 55 with a Sigma 18-50mm f/2.8 Macro. I haven't been aware of this problem with prior versions, but I've found it on both, LR 4.4 under Vista 32bit and the trial version of LR 5.2 under Windows 7 64bit. It appears to be related to the blue/purple color: I first found it on a people shot with uniform blue shirts, where the blue/ skin contrast created a "ghost" frame. To make the artifact disappear, I have to deactivate lens correction entirely. Deactivating CA removal alone does not change anything.
When I attempt to import photos into an existing folder LR creates a duplicate folder with the same name. The original folder (orange) does not show the imported photos, when I try to move the photos from the duplicate folder (red) over I receive the error message "files already exist in this destination." My lightroom hardrive folder appears correctly, no duplicate folder. Also, on import I am only renaming the files, a sub-folder is not created.
Just finished a quickie test drive of Lightroom 4, shown here for one particularly challenging wedding photo I captured a couple of years ago:
[URL]
I've read some claims that LR 4 gives 1 more stop of DR. I think they really mean that LR 4 puts the DR already present in the RAW file to better use than previous versions, but setting that quibble aside.
Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
#LR4 catalog:createKeyword creates a keyword inside another keyword even though the 4th parameter (parent) in the call is nil. LR3 API doc says .. 'nil to create at the top level' and thats how it worked. Looking forward to LR4 SDK documentation.
Suddenly my file order has changed in File Open window and is in reverse alphabetical file order with numbers last. I need to get back to 0-10 followed by A-Z in that order. I can arrange icons by name and it works, but when I leave the file and come back it is reversed. I'm using the OS dialog and have Windows XP.
I use auto cad 2010.In my computer .dwg file is deleted but .bak is in my computer but when i rename the .bak file to .dwg file but it not open in auto cad 2010.
I mistakenly installed CorelDRAW and found out not what I hoped for, uninstalled, but now a bunch of Gimp file associations are gone!! like patterns and gradients and other things are no longer associated with Gimp! how do I get those file association back for Gimp?
