Lightroom :: 4 Conversion Causes Purple Banding
Mar 7, 2012
Converted this morning to LR 4 and hundreds of my developed photos in all Collections now have purple streaks / banding / ghosting. I did not update to the 2012 developing engine so the same LR 3 sliders are still there. I tried a few of them with the new engine and new sliders and the purple banding is still there, and I could not adjust them away except to slide the tint slider to the left, which is a bad effect (makes the photos green). This is probably happening in one of ten photos. . I went back to LR 3 and the shots are perfectly developed.
View 11 Replies
ADVERTISEMENT
Dec 29, 2013
Blue looks purple in Lightroom 4.
When viewed in Photoshop or Zoombrowser the blue looks ok.
View 4 Replies
View Related
Apr 29, 2012
After installing LR 4.1 RC2 I noticed that the new defringing was set to +1 for purple on many (but not all) my 7D raw files.
View 4 Replies
View Related
Apr 19, 2013
I shoot in Camera RAW on a Canon 5D2 in LR3 and I'm having colour issues; skin tones are often purple/magenta tinted and very difficult to correct. I usually set the WB to Custom and shoot a grey card and set the picture style on the camera to Neutral (why does the WB affect RAW images anyway, I thought it only operated on the jpgs?)
On import, pics often look ok then resolve into higher contrast, garish colour versions which are less pleasing - have I set a preference incorrectly or am I missing something else?
View 3 Replies
View Related
Jan 1, 2014
Take a look at the attached photo - on the left is a black and white photo I exported out of photoshop after desaturation but opened in pictire viewer. On the right is the same photo as viewed in photoshop - again after desatuation to convert to black and white. My monitor is calibrated and photos opened in picture viewer or other simple programs look correct - but in lightroom or photoshop they have a tint. How do I remove this?
View 20 Replies
View Related
Jun 4, 2013
Recently, I updated my LR3 to LR4.3 and my camera from Olympus EP2 to OMD. So, I am not sure if any of these factors play a role but, I started having severe banding on photos taken in vivid sunny day with a blue sky. I am not an advanced LR user and, my process of developing photos in LR has always been pretty simple. First, I export RAW format pictures from a card to a hard drive. Then, I do some adjustments and make two jpeg copies from each RAW file.
One copy I in Export dialog box File Settings as a JPEG, Color Space sRGB, 100% quality and another copy I export for web so, I limit to some minimum size without setting any quality reductions.
Again, in the Export dialog box -> File Setting -> check (checkbox) Limit File Size to 300KB to 1MB. In this sample case, file was farely large so, LR did not allow me to save this file in less than 950KB. URL....
View 15 Replies
View Related
Jul 14, 2012
I am having a problem where just a few of my files show heavy magenta banding after importing into Lightroom 4.1. I am importing RAW files from a Nikon D800. I don't think it's the camera because most of my files are fine. And I don't think it's the files themselves either because they look fine in camera, in finder (Mac OS X 10.6), in Photoshop CS5 and even in Lightroom 4.1 itself at the import preview. But once I actually import the photos, they suddenly become corrupt and show heavy magenta banding. I've removed the files from the catalog and the HDD several times and attempted to re-import several times without success. And of course there are several attempts at restarting the iMac and running hardware checkers etc. to eliminate extra variables. It's only 5 or 6 files out of maybe 30.
View 13 Replies
View Related
Jul 13, 2013
I shot an event for a couple (a reception) and I didn't have my gray card so I set my Canon 5D mkII on auto white balance (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4). As you'll see from the two example photos - the shots taken in the venue lobby looked fine, but the shots from inside the event itself were amazingly saturated. The room had a ton of very bright uplighting in purple and pink - the shots looked fine in the viewfinder, but once I brought them into LR4, there was a nearly complete purple/pink cast over everything. Setting the white balance in LR to auto, tungsten, flourescent - nothing worked. Adjusting the temp sliders - only slightly better. Reducing vibrance and saturation useful a little more, but I'm really having a hard time finding a fix!
View 6 Replies
View Related
Sep 28, 2012
I'm using Lightroom 4..i've been importing my RAW images from my external harddrive. Some show up in the catalog as ruined with a blank white section and color bands. I've checked the actual image on the external hard drive and it is fine. I've deleted the ruined files from the LR catalog, then re-imported those problem ones... still come in as white with banding. I've even tried deleting them from the catalog, then from the hard drive... then back onto the HD from the camera, then back into lightroom. Some look ok until I look at then in loupe view and the same problem happens. Mean while the images on the HD and on the camera's CF card are fine.
View 5 Replies
View Related
Apr 3, 2012
since I can't seem to find any definitive information on this... how's Lighroom 4 dealing with 14-bit raw NEF files (coming from a D7000 in this case) when it is converting to DNG? Is the entire 14-bit colour information being kept or is there some sort of loss or conversion going on?
View 3 Replies
View Related
Dec 17, 2013
This will allow conversion of Fujifilm XE-2 raw to dng?
View 2 Replies
View Related
Jan 9, 2014
I have done some heavy editing on my RAW file with numerous Adjustments Brushes and Spot Removals. Now that I'm done I want to try making a Black And White version using the standard B&W conversion in LR 5.3. Here comes the strange part....the area that I have done all the editing in remains in color while the rest of the shot gets converted to B&W. In other words, LR 5.3 fails to convert to B&W on heavily edited areas!? As you can see in the image the top left area is blue wihle the rest of the image has been converted.
View 4 Replies
View Related
Feb 13, 2013
I recently converted from PC to Mac; downloaded and installed LR4, and it quickly recognized my photos and photo folder structure. Also, apparently each individual keyword has been imported. However, 3 problems:
1. no photos have keywords assigned to them
2. the keyword nested structure (keywords within other keywords) did not transfer, so they are all listed alphabetically
3. I don't see any history on the edited photos, so am not sure if I have originals (unedited) or edited. If I have edited photos, can I go back and re-edit (non-destructive editing in LR)?
View 2 Replies
View Related
Jul 22, 2013
Mac OS 10.6.8
Lightroom 4.4
My Ricoh GR creates DNG files that have previews in the Finder. But because the file sizes are big (and I don't need them so big), in Lightroom I reconvert them to Lossy DNG (using compatibility with Camera Raw 7.1 or later). Now, after this conversion, these new DNGs don't have any previews in the Finder anymore.
So, the problem must be with the DNG converter in Lightroom!
View 5 Replies
View Related
Jul 18, 2012
Is there any advantage to doing black and white conversion using CS5 rather than LR 4.1?
View 2 Replies
View Related
Mar 31, 2013
converting GPS data created in Aperture 3 to the images so that I can pull this information into Lightroom 4 (which I'm currently under the 30 day trial period but despirately wanting to change to!).
View 13 Replies
View Related
Feb 18, 2014
I have a Nikon J2 Camera. It is set to take photographs and store them on the card as NEF files these cannot at the moment be converted to be read by my Version of Adobe CS4 Photoshop. How can I upgrade my software to enable me to read these files?
View 1 Replies
View Related
May 16, 2012
Lightroom 4 just converted all my images from LR3. The problem is that I can't look up anything in the "All Photographs" catalog. Although all photos are available in the folders below, all the collections are intact, the All Photographs catalog shows 30K images, and all other functions seem normal, clicking on it shows a blank screen with this message:Click "import..." button to beginBegin what? The import button takes you to the normal import screen with "source" as being the first step. Does it want me to pick all the photographs that are already in the catalog, so that it can... import them? The catalog already has all this information. Right now the only way I can do a search on the catalog is to do it from a folder or collection. I need to search the entire catalog!
MAc Pro, Mac OS 10.6.8, Lightroom 4.0, Photoshop CS6
View 2 Replies
View Related
Jul 16, 2013
I a thinking of upgrading my LR to the new 5. I was able to try Irdient new upgrade for X-Trans and my file are so much more crisp and detailed then they are in LR with your support for the X-Trans. Are you going to upgrade you support to match those of Irdient. I am sure you have read the reviews and have used the product for your own edificaiton. If you are not, I may have to switch, my business depends on my best product.
View 6 Replies
View Related
Apr 3, 2014
I am converting my proprietary RAW files on my hardrive and LR4 catalogue to DNG files for the main reason of gaining extra space on my hard drive. I have ticked the 'delete original files after successful conversion' and they no longer appear on my hard drive, only the DNG files do but the space remaining on my hard drive is shrinking? Why is my drive not reading the extra space that should be now available?
View 5 Replies
View Related
Jan 10, 2013
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
View 19 Replies
View Related
Aug 13, 2013
the current raw converter in LR5, Bridge CS6 and Photoshop CS6 produces magenta or green pixel errors on grey ridges (e.g. mountain structures).
In Nikons NX View 2 does this problem not occur.
View 6 Replies
View Related
Oct 18, 2004
I'm just starting to learn/play with PhotoShop but I've already came across one problem. Once I open photoshop, no matter what layer or background I'm in, the only colour that shows up is pink. Nothing else. Is there something wrong with my monitor? Should I try reinstalling Photoshop?
View 2 Replies
View Related
Jan 31, 2012
I have successfully created curved text, however when I have my text completed and move my layer around it leaves the 'purple outline' in place after I am done. How do I get rid of this purple outline?
View 2 Replies
View Related
Apr 3, 2012
Every image I open in Photoshop has a purple tinge to them. I think this must be a setting I have in the program. I can't even print screen it as when I do, it comes out in the correct colors. It doesn't do this in any other programs (indesign, illustrator etc)
View 1 Replies
View Related
Feb 26, 2004
running photoshop 7.0.1.
ive had it installed for about 6 months with no problems. came into work a couple of days ago, and my grayscale has been replaced with a purplescale?
if i create a new document, wether its rgb, cmyk, or grayscale, the shades that should be gray are now purple. no color profiles or color settings have been changed, and i checked with a co workers settings and they are the same, anyone know what is going on with this?
also i know its not my system, cause i just opened illustrator, and that grayscale is fine.
i have supplied a screenshot of the purps:
View 1 Replies
View Related
Mar 5, 2003
My color palette is all that ugly purple, and i'm not sure how to fix it, it will save and the colors will be fine, but if I look at it in photoshop it has a purple haze over it, and the only 2 colors I can use are purple and green. This happened before, and it fixed itself, but its been like this for 4 months, and i'm getting fed up..
View 3 Replies
View Related
Mar 25, 2004
if there were any plugins for fringe removal in photographs, i currently use the sponge tool or i mask off the offending area and use selective desaturation.
View 9 Replies
View Related
Dec 27, 2008
I'm having this problem for a couple of weeks now and can't seem to figure out whats wrong. I've read dozens of websites & forums but can't figure out what's wrong. Maybe someone can help me out here.
I have a wide gamut monitor (Eizo S2231W) which i have calibrated with a DataColor Spyder3Pro. Since then the colors in Color-aware programs such as Photoshop, Safari and FastFiewer look way off. For example, the sky turns from blue to purple. I tried to re-calibrate a couple of times, deleting all ICC-profiles, re-install the software. Nothing helps me to get rid of this color shift. Well, getting rid of the Spyders ICC-profile solves it, but this device is supposed to improve my colors, not ruin it.
View 5 Replies
View Related
May 14, 2012
The colour blue on my photoshop has turned into purple?
View 7 Replies
View Related
Aug 17, 2003
Lately I have been experiencing this weird problem. Every time I try to convert my image to grayscale mode, instead of just being black and white the image turns purple. Is there anyway to fix this problem? ....
View 5 Replies
View Related
