I have a LR 4.2 and NIKON D80. I shoot in RAW format. When i import imahes from camera into LR some images shows quite destorted. The distortion is usually shows on 1/3 of lower part of the image and makes this lower part of the image almost unrecognizable. When i import the same image on another machine 64-bit version of LR the image looks OK.
View 12 RepliesWhen I select an upright (portrait) image from library, the develope module displays a distorted landscape view. This happens to every upright file in the folder. Other folders seem to work ok without this problem.
While messing around with image rotate, read metadate, save metadata, etc I managed to make one image open up correctly but I have been unable to recreate that work around. In any case, that fiddly way would take too long as I have hundreds of files to correct!
I normally work with auto rotate ON in the camera.
Lately I've had a couple of folders that I might make a virtual copy in or add some metadata - when I right click to sync the folder, the popup menu says there are 30 new photos to import. When I click the Synchronize button, the screen goes through the import phase and then an dialog comes up saying No Photos or Videos were found.
View 27 Replies View RelatedI created a collection called, "favorites." The catalog indicates there are 48 images in that collection; however, the images do not show up. (This seems to be different from the "missing" problem - I understand how that can happen...) don't know where to look and don't know if I have lost those images somehow? I have approximately 25 other collections, all of which seem fine.
View 4 Replies View RelatedI have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
This is a new CS4 install on Vista. Never used Photoshop before. Every image I open shows up looking distorted like a plaid grid pattern. Is this a display / video issue? Attached xml image.
View 5 Replies View RelatedJust started to explore gimp. Have an application for distortion effects, but need to know the following. If I create a square (jpeg) that is exactly 50% black and 50% white and then distort the image using, for example 'i warp' or 'whirl & pinch', will the colour proportions of the resultant image still be exactly 50/50?
View 2 Replies View RelatedMy document looks great and then when I print it my logo, which is a circle, is distorted into a diamond shape.
View 2 Replies View RelatedI'm creating a van wrap design for our company, by Monday, so time is of the essence. When I import an image onto the design it's perfect, but when i slightly rotate the image, all the edges become serrated. Will this affect the final print? If it will affect the print what is it that I need to learn or do to change this?
View 3 Replies View RelatedWhen I open a high resolution image in Ai they look somewhat distorted and choppy. They are jpeg files that I am placing in order to envelope distort onto a mesh. For some reason any bitmap image I open with Ai looks like this. However, when I open the same image with Acrobat Pro or Ps the image looks perfect. Images are RGB in both apps.
Image in Ps or Acrobat Image in Illustrator
There most be something in Illustrator that is causing this. Images are being embedded and cannot be linked since they need to be distorted. I am runnung CS6 on Intel iMac Maveriks.
I recently broke my HP laptop 15" screen and have set the laptop up as a desktop, using a new Dell u2410 monitor. The images in lightroom are now distorted vertically, so that a vertical 8x10 looks like its 8x11.
View 14 Replies View RelatedI haveElements 9 and CC on the same computer. When I click to open images from Bridge, 9 is shown as the Default and CC is not shown. How do I eliminate Elements 9 as the Default?
View 1 Replies View RelatedNot sure how or why but cant crop any images now as it shows the layer as locked ??!!
View 1 Replies View RelatedIt was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
Photoshop images that I've imported into 4.4 now apparently acknowledge any PS transparency in the Library view. This means the color of the Library backgorund shows through the image.
The image on the left was imported using 4.3, the one on the right using 4.4.
Is there a way to not have this happen? I haven't changed any prefs so something's changed.
When I use send an image from LR to PS using "Edit in..." Only some of the LR adjustments show up in PS. (E.g. color adjustments are visible while crop and exposure are not). All versions (LR, PS, ACR) are the newest. I am on mac OSX 10.9.1.
View 11 Replies View RelatedI was pleased for the first time ever to see some yellow labels created in Bridge retained after an import into LR.
But before I got too happy, I then noticed (and this is why I'm writing), that the red labels I created in Bridge are not there only the yellow ones.
Anything I can do to have LR show all the colors?
LR 5.0
I have been having real problems with Lightroom 3.6 showing RAW files (from Canon 400D) as very soft focus, whereas Zoombrowser and Photoshop Elements show the images as crisp and sharp.
I have wasted hours trying to sharpen images which did not need sharpening as I assumed my photos were bad, but they are not.
This has also been found to be the case on other photos taken in RAW with another Canon 50D. So the fault seems generic.
I have a folder on my hard drive with 72 photos (files) in it. When I pull this folder up in Lightroom 3, the number next to the folder incorrectly indicates that there are 73 photos in this file!? When I "Select Al"l photos for this folder, it indicates that 72 out of 73 photos were selected. Why does Lightroom indicate one extra photo that should not be there, and how do I correct this? Synchronizing the folder did not fix this.
View 2 Replies View RelatedIn Lightroom, right clicking on a picture, chose "Edit In", one of the choices is "Untitled Preset". If I choose that it opens a box to "Edit Photo with PhotoshopElementsEditor.exe"
I no longer have Photoshop Elements installed, how do I eliminate this choice?
Just did update to LR 4.2 When I tried to do an external edit to PS cs6, I got no options: edit original, edit a copy, edit with LR settings. It goes directly to PS without bringing the PS window to the front. It is also not added to the LR catalog. Photos are raw. Did not notice this happening before update.
View 1 Replies View RelatedIf in Library mode I click "All Photographs" in the upper right, then turn off all filters, then hit CMD-D so that no photos are selected, just above the filmstrip, in the lower left corner of the screen, I read:
"All Photographs [X-1] of X photos"
where X is the total number of photos in my Catalog. For example, right now, it reads "11090 of 11091 photos." If I were to import another 50 images, it would read "11040 of 11041 photos."
It's been this way for a while, like I said. And I guess it doesn't make much difference. I do sometimes wonder, though, if there's some mysterious ghost photo in there somewhere, that's not displaying for some reason.
The label for Library, i.e. the word 'Library', no longer shows in the line of module labels along the top panel of my Lightroom 4 window; all the others from Develop to Web are still there. I see they're called Module Picker Buttons (Menu - Lightroom - Identity Plate Setup..). I've just downloaded Lightroom version 4.4 but that hasn't triggered the reappearance of 'Library'. So I now have to use alt-cmd-1 to access the Library module. retrieve 'Library' for the top panel? Have I unknowingly made a keystroke that disabled it? I'm running Lightroom 4.4 on Mac OS 10.6.8.
View 2 Replies View RelatedWhen I preview or play a slideshow in Lightroom 5 I see a black screen. I've tried it using various settings, images, lengths, and with the show saved or unsaved, all with the same result. In a preview I can see the show advancing through the slides; all remain black.
Sometimes (unpredictably) the screen isn't black, but rather two colors or color washes separated diagonally.
There are no videos in the shows. (A black screen for a slideshow with a video as the first slide is a known issue mentioned in the Lightroom Journal.)
Exporting to pdf works properly. An exported video shows as a black screen.
(Mac Pro, OS X 10.7.5, Radeon X1900 XT video card)
I've moved my catalogue to LR3, and want to update the procees to 2010. However, when I do, it marks the photo as developed in the Library. This means I cannot see which photos I've simpy updated the process on, and which I've actuall developed. Can I hide the 'developed' icon for photos I've simply updated the process on?
View 2 Replies View RelatedI have upgrade to 5.2 but still have the same problem whith black screen.
View 1 Replies View RelatedI have problems with displaying images in develope mode.
On the main screen it keeps simply black, on the second screen (scaled fullscreen view) is shows blurry and not sharp...
I'm using LR 4.4. 64bit PC, yesterday I tried an installation of LR 5 beta and got the same problem with showing images
Develop Module: when using brush, it often shows up as a big square. Only the actual round brush area is modified, but it is annoying to have a big square block the view. The included cropped screen shot shows the brush working on the green part of the plant - and a larger square lighter part around this.
View 5 Replies View RelatedMy problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies View RelatedI have seen a problem like this before, and raised a question on the forum, but realised what was wrong (the problem happened on a full colour image, and once I set the Process to 2012 it went away). However it has cropped up again, and this time the image was imported directly into LR4 so Process was 2012 by default.
I have an image which is a glass with liquid in against a black background. I have made a few tweaks in LR and am ready to send it off for printing. I just though I would take a look in Soft Proofing to see how the coloured liquid looked. When I click soft proofing and choose the correct profile supplied by my printing company (which is a 'glossy' profile), the black takes on a milky grey appearance, but according to LR is not out of Gamut.
If I choose the matt profile from my printing company, the same effect is there, but less so.
I rather think that this is quirk of softproofing black, what with black not actually being a colour and all that. Since there are no gamut warnings, and I have never had a problem with printed images on a black background, then I think I should ignore this. It does give a rather mis-leading impression though.
I've just tried downloading LR4 on my girlfriends computer (my comps HD just failed) - but when I go to download it, I get a message saying "this type of file can harm your computer. Do you wish to continue?" Her comp is a macbook pro 15" and I was trying to DL the mac version.
View 1 Replies View Related