Lightroom :: 4.1 Installer Exits On Win7 64-bit?
May 29, 2012
Is the Lightroom 4.1 installer (Windows 64-bit) working? It tells me it's extracting the .msi file and the progress bar gets about 90% of the way full, but then the installer just exits with no error message. I have tried directly launching setup64.exe and running it as an administrator, no good. I have plenty of free disk space - but even if it were a full disk, I'd at least expect to get some kind of error message.
Not sure if it's a bad installer or just something messed up on my system.
View 28 Replies
ADVERTISEMENT
Sep 5, 2012
I just downloaded the LR4 upgrade and when I double clicked the installion icon in Finder I got an error in Installer application:
"Invalid Distribution File/Package" Here is the full list of errors:
Sep 5 12:23:36 computername Installer[673]: This distribution script is too new (Requires spec version >= 2, current is 1.058)
Sep 5 12:23:36 computername Installer[673]: Error parsing distribution script from data
Sep 5 12:23:36 computername Installer[673]: Invalid Distribution File/Package
I just installed OS 10.6.3 Snow Leopard with no troubles. I am running a CoreDuo iMac with 4 gb RAM and plenty of HD space. I have LR3 on my computer.
View 3 Replies
View Related
Jul 30, 2012
i'm using lightroom 4.1 x64 under control of windows 7 64 bit. all my videos (.mov) imported to lightroom have no sound when playing them in ligfhtroom 4.1. outside lightroom these videos do have sound very well. what can be done to enable lightroom 4.1 to play theses videos with proper sound?
View 9 Replies
View Related
Aug 4, 2013
I had LR3.6, never tried to tether. I upgraded and now have LR4.4. I tried tethering my 50D and my 7D, LR wont recognize either camera at all. EOS Utility works fine. Same cameras, same cables work on a fresh LR 4.4 install on my wife's laptop perfectly (never had EOS utilites or LR installed previously).
Both PCs, running win7 64-bit.
I uninstalled LR3 and EOS utilities off the problem PC then restarted, but still no go. Windows recognizes both cameras on any USB port with any cable, so I have eliminated those variables. I am at a loss at this point, other than re-installing LR4. Hoping I dont have to do that and rework several thousand images...
View 3 Replies
View Related
Mar 10, 2012
I'm running LR 3.6 on Win7. I have a dual monitor setup with a Samsung 2443 and a Dell E6400 laptop screen.
My problem is that the color profile used by the monitor is way too mangenta on the Samsung monitor. Every image is tinted very mangenta when shown on the Samsung. If I drag the image over to the laptop screen, the color balance are normal. If I drag the entire LR window over to the laptop screen, the color balance of the images changes when the window is released.
How can I change this? (I have no access to a screen calibrator at the moment.) I think its the ICC profile for the Samsung which is wrong, as the same happens if I open images in other picture viewers. Except windows GUI itself has nice, white, crisp colors. If using the monitors on say Mac, they are also fine.
View 1 Replies
View Related
Oct 3, 2012
I have the following issue. I can't import the Panasonic LX3 files in Lightroom 4.x (including 4.2) on my main Windows 7-64bit PC. I get the error message "The movie files contain no video frames". All RAW files from the LX3 are imported correctly!
Strangely, i can import them on my MBP running MacOSX Lion.
View 2 Replies
View Related
Jul 20, 2012
Now with Windows 7, on a completely new workstation I have exactly the same issue: When I start LR and select the catalog, everything works as usual. But when I double click on the *.lrcat file, or select one in windows the following happens: Lightroom tries to install itself! !!!!
When I click on cancel, an error 1706 appears, "no valid source could be be foundfor product LR 4.1 64bit, the windows installer cannot proceed." To go ahead of an obvious question: the file type lrcat seem to be associated with the 64 bit Lightroom:
View 3 Replies
View Related
Dec 23, 2008
Moving to a Windows 2008 Server x64 desktop and notice that when Lightroom is installed it's the 32bit version. On Vista x64 the installer automatically installs Lightroom 64bit. Is there a way to manually select the 64 bit version for install ?
View 6 Replies
View Related
Dec 17, 2012
After upgrading to Lightroom 4.3 in Windows 7 64Bit I often get random problems during DNG developing. The first problem: LR during developing shows on image thumbnail the exclamation mark icon of "metadata conflict" warning (see attached screen snapshot). This problem occurs when an external program (i.e. PS) has modified the DNG file and LR Catalog is not synchronized. Of course no modification at all has been done externally by any software but LR itself! It seems a problem of DNG/catalog sync that in some cases fails (very disappointing). The second problem is the black exclamation mark (see again attached screen snapshot) that means problems during reading DNG!! This problem is absolutely random too. Developing is still possible on this files and usually the problem disappear ...
This problems don't affect proprietary RAW files (NEF from my Nikon D300s) and I've never seen them in Lightroom 4.2.
View 4 Replies
View Related
Jul 25, 2012
I'm having a issue with the material editor. Whenever I use the shortcut (M), it randomly quits. No error message what so ever, just quits. I've reinstalled it twice, deleted everything. By everything, I mean every single folder and registry key that has to anything to do with 3ds Max or Autodesk - but the problem continues.
View 3 Replies
View Related
Dec 9, 2011
Seen this recently? Using Inventor 2012 SP1 on Windows 7, 64 bit. If we go back into a previously created sketch and edit or add a dimension, upon clicking the green check mark to complete the dimension edit, the sketch exits back to the modelling environment, meaning we have to edit the sketch again to continue with other changes. Obviously no big deal if I'm only editing one dimension, but how often does that happen?
This started happening prior to SP1 being installed. We have this happening on multiple computers (all with the same hardware specs) in our office. I don't believe it to be a hardware or driver issue, but I am wondering if it is a process issue. For example, we use project geometry a lot, even projecting from other parts within an assembly (non-adaptively). We also work on SAT file models, rather than geometry initially created from Inventor itself.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
View 9 Replies
View Related
Jul 23, 2013
I have been using Ps-CC for about 2 month now with no problems and now this starts to happen. I have tried rebooting my PC to no avail. Should I uninstall PS-cc and reinstall and are there special instructions for this?
View 3 Replies
View Related
Jan 3, 2014
I am trying to 'keep up' with my students, thought I'd use the Tutorial provided, finished the 2mm_guard...went to Create Flat Pattern and...I've never seen an 'exit' that quick before. I'm running Windows 8.1 on what I thought was a 'magic' Dell XPS 12 -
View 4 Replies
View Related
May 7, 2009
So i downloaded the trial from the Adobe website and now im having installer issues. I close all my programs like it tells me to, including the Windows Sidebar and RocketDock. But when i install it i keep getting this error, attatched file,
View 1 Replies
View Related
Feb 24, 2012
I bought CS4 for mac a couple of years ago and have since misplaced my disks, though I still have the serial numbers. Any .dmg installer file for CS4? The file name MAY be photoshop_11_ls1.dmg.
View 6 Replies
View Related
Jan 27, 2009
I am trying to install the Photoshop CS4 trial version on Windows 7 x64. After the two files download I run the exe file and it extracts all the files from the .7z file. Nothing happens after that, and if I goto the extracted files and try to run setup.exe it says that windows cannot find the specified file, and I might not have sufficient permissions. I am running this under my account with administrator privileges though.
View 1 Replies
View Related
May 20, 2013
I installed Revit 2013 in my laptop, but always showed me an error and revit closed. I reinstalled the windows on my lap top and downloaded revit again (Students version) but in the window installer don't appear enable the revit option.
View 2 Replies
View Related
May 2, 2013
PS6 was working fine before I noticed it, it no longer open whenever I trigger the .exe. It just won't run.
Error desc:
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61beba
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17514, time stamp: 0x4ce7b8f0
Exception code: 0xc06d007e
Fault offset: 0x0000b760
Faulting process id: 0x69c4
Faulting application start time: 0x01ce46f6ae8eb62f
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6Photoshop.exe
Faulting module path: C:Windowssystem32KERNELBASE.dll
Report Id: eee8042f-b2e9-11e2-be44-0022192adee4
View 2 Replies
View Related
Jan 19, 2013
i download photoshop but then when i was installing the program, the installer failed to initialize. I downloud Adobe support advisor but it did not find any problem.
View 1 Replies
View Related
May 24, 2012
Windows 7 OS, On a new laptop I loaded my trusty Creative Suite2, it failed to open, after I ran as administrator and manually entered the folder location C:progra~2adobe, CS2 loaded and runs fine. I now want to install Photoshop CS3 and I get a very early error message indicating Minimum Requirements not met...Windows XP SP1 and greater and Windows Vista, it then dumps me out.
View 3 Replies
View Related
Apr 7, 2012
Since I installed Mac 10.5.8 my PS 7 will not function, and an error message pops up that says it cannot be used. I purchased PSE 10 to update Photoshop and it says there is not enough memory to install it. I figured if I uninstalled PS 7 that should free up enough memory, but don't know the correct way to do it.
View 1 Replies
View Related
Dec 23, 2012
I've tried multiple times and each time the installer stops at about 80-90% on the install. No error message just stops.I even tried just installing single parts of the CS4 package and the same thing. I am running Windows 8 64 bit.just trying to get photoshop installed.
View 1 Replies
View Related
Oct 5, 2008
I've just yesterday had to re-install my operating system (XP Professional), after which none of the Adobe installers will operate as they had before.
When I try to install I get an error message telling me I must have Service Pack 2 installed.
I do have SP2 installed.
I've used several Adobe apps for years with this same OS and I've never had this problem before.
I'm using a Dell Dimension 8200 computer, Pentium IV 2 GB processor, 1GB RAM, and a Canon MP780 multiple function printer.
Does anyone have any idea what can be done to solve this?
View 7 Replies
View Related
Dec 29, 2011
regarding the installation of 2.6.10 usingthe unstable installer :
Is there a way on windows 7 64 bits to get rid of the following alert eachtime you are executing something :
quotethe procedure entry point gdk_win_32_begin_direct_draw_libgtk_only cannot befound in the dynamic links library libgdk-win-32-2.0-0.dllunquote
View 12 Replies
View Related
May 30, 2012
How to Move Photoshop 5 LE from dead XP to Win7? I moved the program files from the dead XP computer to a new Win7 notebook, but it will not run because there is not enough memory RAM. What does this mean?
View 2 Replies
View Related
May 21, 2013
I just bought a new computer. I've seen some mention about incompatability issues. The last thing I want to do is start deleting everything on my new machine. It has Premire elements 10 on it. I read something about a caps database. I have renamed it but still get the same corrupt DB error. What can I do to install my CS4 and not delete other files on my new machine?
View 1 Replies
View Related
Jun 25, 2012
I cannot record into a HP laptop with win7. VX3using. I can do it with another one using Vista. What could the problem be? Using Canon HV 20. What sould the setting be? It plays and I can control the camera with VX3. But after I test for 30 seconds it says "cannot save file corrupt" or somethong to that effect.
View 14 Replies
View Related
Apr 24, 2010
I've just been testing out the new X3 Video Studio and I was wondering if I have missed some settings somwhere.
It's running horribly slow, I was kind of expecting it to be lighting fast on my machine, which is a 8 CORE processor with 12GB ram on Windows7 Ultimate.
Is it me, or have other people experienced this slowness on their systems as well?
View 14 Replies
View Related
Oct 17, 2011
Have an issue with Max2012 hanging on startup "Initializing 3ds Max..."
View 4 Replies
View Related
Aug 24, 2011
Autocad map 2007 has not opening in WIN7 OS. I had changed the compatibility settings to WindowsXPsp3, and then it has opened in Administrator login only. Other users couldn’t get the map07. When they click the run the program prompt, there is no response.
View 8 Replies
View Related
Nov 17, 2013
i am installing CS5 on my iMac and at 64% complete (installing Adobe Device Central CS5.5) it asks me to insert Disk Adobe Photoshop CS5.1 to continue.But all my files are download installs so of course I have no DIsk.
View 1 Replies
View Related