I've just installed LR 3.6 on my new Wins64 laptop and it is unable to view RAW files from my Canon 5D Mark1. This is working fine on my Win32 PC though. It looks like I need to install Camera Raw 5.2 or later but I can only file 'Update' downloads which fail to install. LH says it's up-to-date when I check for updates and theres no Plug-In Extras available..
View 1 RepliesIn an idw of an assembly, I have made a section view and gave it a distance of 10in expecting to only view my assembly 10 in from the section line.
However, all I get was a slice 10 in deep from the top, my section view wasn't looking at the full height of my assembly.
I started a new print, inserted the same model and the same thing happened. This is only occuring with this model, other models are working just fine.
IV2012 sp1 Win7 x64
I cannot download my RAW images from my Canon 5D MK III to LR4.1 Apparently I need the CR 2 version? Very frustrating as I have just bought and downloaded the new LR 4 and updates it. Still can't import the photos and some won't even show a preview.
View 1 Replies View Relatedthe message is - "the following files were not imported because they cannot be read" tried direct from a folder i created on my desktop - same same on a mac
View 2 Replies View Relatedi need your opinion regarding a phenomena i am observing in the RAW images from Mark iii.The following images appear to be absolutely correct in the camera and when viewed through a picture viewer.I have tried and tested the following scenarios:
1. Used a medium speed kingston CF Card (new) and transferred the images through the USB cable supplied with the camera.2. Thought the card might be slow OR faulty.. used Sandisk Extreme and Extreme Pro SD Cards but same result.3. Transferred SD Card data through the builit in laptop card reader.4. Have directly imported the images from SD Card into Lightroom 4.3, copied the data firstly to laptop HDD and then imported, copied the SD card data to an external HDD and then copied.same result!!5. Have tried the same with both Win7 and Mac OS.6. The DPP sw that came with the camera gives the error of 'Decoding Failed' with these images.
Usually 10-15 images out of 100 give this kinda pattern.
Not very technical but just upgraded my camera to a Canon 6D and tried to upload my raw images to LIghtroom v 4.4. Keep getting and error message that it does not recognize the files.
View 1 Replies View RelatedI just downloaded LR3 on my Mac and cannot upload raw images from my Canon EOS T3i. Didn't have a problem with my PC.
View 2 Replies View RelatedThe S100 images lack GPS data when view in Camera Raw, though Canon utility program will display the GPS data.
View 15 Replies View Relatedlightroom 3.6 cannot read the canon 5d mark III images. What can I do?
View 1 Replies View RelatedI have just downloaded lightroom 4.1 but it won't open RAW files from my new Canon 650D.
View 6 Replies View RelatedI have Lightroom 3 and I am unable to import my raw images from my Canon 60 D. What do I need to do to fix this?
View 1 Replies View RelatedUnable to import raw images from canon 40D into LR 4. using mac OS 10.7.3??
View 17 Replies View RelatedWhy can't I preview or import images from my canon 5d mark III in lightroom 3?
View 3 Replies View RelatedJust as a pre-amble, I love LR and perform 90% of image processing with it (rest in PS). I use a Canon EOS 5D MKIII shooting in RAW, running LR5 on Win7. My monitor is properly calibrated.
Every so often I view a RAW image with Canon DPP mostly to display the AF point. What I am noticing is that the DPP SW renders the image very different from LR and I tried every LR Profile. In my opinion the DPP rendering is sharper, with less noise and a more natural look. My latest example of the difference in image rendering is from images taken with the Canon 200-400 1.4 zoom lens. This difference in image rendering is after RAW import with no images editing on either application. I just wish there would be a LR profile that yields a similar quality image.
I have a brand new Macbook Pro with Retina Display and am running CS6, shooting with a Mark III in full resolution raw format. Focus is on in camera but when I open the images in Photoshop, they do not appear super sharp when zoomed in.
Is this a display issue or a program issue or something else? In the past I can usually get the images so sharp that I can see every pore and hair.
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedI have noticed in the last few days that my Lightroom 5 (CC) is failing to quit. I run it on a mac with the latest OS. I have to force quit the program.
View 5 Replies View RelatedIs there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies View RelatedI am trying to use Lightroom and whilst it imports images successfully, I cannot view them at all. I do not have the '?' so this isn't a problem but I don't know what else it can be. I am using 4.1 but currently downloading 4.2 (very painful, almost impossible in Indonesia), but I would imagine this shouldn't be an issue either.
View 4 Replies View RelatedI recently installed LR4 on a maching that is running LR2.7. I would like to be able to view the LR2 catalog or images in LR4, but not necessarily convert all the photos to LR4. I have been told that I should not do a wholesale conversion of the images to LR4. I am not sure how to view the LR2 images in LR4 without converting the catalog. Is there a way to accomplish this without a wholesale conversion?
View 6 Replies View Relatedis it possible to view images on memory card in LR without importing or before importing?
View 1 Replies View RelatedToday I was browsing through my images library and I noticed that some of the images are dimmed. By dimmed, I mean that they appear desaturated... as though LR4 is trying to tell me something about the image... but I don't know what.
If I click on the image I can edit it. It appears normal when it is the "current image" (bright colors again). But as soon as I make another image the "current image" the other image goes back to the dimmed look.
This is only true for some images.
I was able to re-order images in the grid view just by dragging them. Now I cannot move images.
View 2 Replies View RelatedI have Just upgraded my LR3 catalogs to LR4. I am able to view my images in Library mode but when I switch to Develop it says no photo selected and there are no images in my film strip. What is going on ?
View 2 Replies View RelatedHow do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far.
View 2 Replies View RelatedLR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies View RelatedWill Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies View RelatedImporting images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
Using LR v5.3. 6000 images on my HDD and in the LR catalog.
I wish to search for all images oriented in the portrait view. I've checked the metatdata search options, and think I've determined that there is no criteria for an image in the portait orientation orientation.
I have lost the grid view of my images on my Mac Book Pro. All I can get is the loupe view. I have lightroom 4.2. How can I get the grid view back?
View 4 Replies View Relatedhaving just purchased version 4.1 a few days ago. I've imported about 2,500 RAW image files into the program and am learning the ropes for developing and organizing them.
The problem I'm having is that much of the time I'm unable to select photos in the grid view. When I place the mouse pointer over a square in the grid containing a photo, I expect it to "light up" and display the icons for flagging/rotating/rating the photo. In practice, this doesn't happen most of the time and grid squares that won't "light up" cannot be selected. As I move the mouse around the grid, the occasional grid square will act as expected but most of the others will not. The behavior seems random -- a grid square that acts properly one moment may not respond the next time I mouse over it, and other grid squares that were unresponsive may now act as expected.
I've tried pausing over the image for an extended period of time in case this is a performance issue, but if a grid square doesn't light up when I first put the mouse pointer over it then leaving the pointer on it won't get it to respond. If I move the pointer elsewhere on the grid and then bring it back, the square may or may not react.
My setup:
4-core Mac Pro
5GB of memory
Mac OS 10.7.4