Lightroom :: 3.6 - Print Is One Quarter Size Of Screen Appearance
Jan 2, 2012
I am desperate and cannot think what else to try? I used Lr 3.6 to create custom (4 identical) photos to print on Kodak 210x297 mm (A4) glossy paper, using an HP 309a Photo-smart Premium inkjet printer. The size on the computer screen looks correct, in that the 4 pictures take up the whole A4 sheet. However, when I print, only one quarter of the photo paper is used, -ie., the 4 prints are all in one corner, and each print is like a tiny thumbnail. I have tried to vary the way I set this up by using different templates but nothing I do works at all, and I'm just wasting more and more paper.
View 4 Replies
ADVERTISEMENT
May 8, 2012
I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?
View 1 Replies
View Related
Jan 24, 2014
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies
View Related
Oct 7, 2013
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies
View Related
Nov 20, 2013
I'm a huge fan of Full screen mode (pressing F) to review my image large without UI clutter.However often the image in Fullscreen looks quite different from what I see in normal mode within Develop. The full screen image is brighter (by about 0.5EV) and lacks contrast. Exporting the image and reviewing externally shows that it is faithful to the version in normal Develop mode.
Originally I thought this was due to visual perception where the dark border made the full screen version appear brighter, but this isn't the case. Using Lights out mode with all tabs collapsed and then switching to Fullscreen also exhibits the difference. Further I've taken screenshots of both modes, put them in layers in Photoshop and the difference is very noticeable switching between them.
I'm not sure if nobody is noticing or using Fullscreen or if it's somehow unique to me? As it stands, without being able to trust Fullscreen mode showing a faithful image it's rather useless as a review tool.
View 17 Replies
View Related
Aug 10, 2011
I have PaintShop Pro X3 and pretty much all the other programs. I scanned lots of photos (6*4) at a 300 dpi which works out at about 11 meg each photo (i think this was overkill!). However, when i created a slideshow these photos are shown as about one quarter sized. Is there any way i can correct this ? Should i for the future scan at a different dpi ? I want to view the images as a slideshow and am not interested in printing them.
View 8 Replies
View Related
Jul 10, 2012
lately I've been started working on Illustrator, since I've always loved the vector pen tool in Photoshop, but I've notice something...
let's say I want to work on an A4 page. I start a new PRINT document, and set the A4 size at 300 DPI. If I do that on Photoshop, I'll get a huge white page that at 100% goes way out my screen, but if I start a document with the same size in Illustrator, I get a page that's smaller than my screen (at 100%).
I guess it's normal because those programs might work in different ways, but I'm concerned about it because this way, in Illustrator a 1pt size brush will always be bigger than in Photoshop.
View 4 Replies
View Related
Apr 1, 2012
I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies
View Related
Apr 16, 2013
I make an image 15.8 x 29.8 and when it prints out on my canon 8300 it is only 15.5 x 29.5 actual size measured on the canvas. the image is designed to wrap over the edge of stretchers 15 x29. the pics are 3 tenths inch short!
another pic is 15.5 x 29.25 instead of 15.5 x 29.5 so it is 1/4 inch short the long direction.don't recall having this problem before so why are the images not the same size in print that they are on the screen?
View 4 Replies
View Related
Aug 6, 2010
When I try to set a large page size (13X19) in the print screen from GIMP, it will not go beyond 8 X 11. What do I have to do to set up to print larger. When I do page set up, it always reverts to defaults.
View 4 Replies
View Related
Feb 28, 2014
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies
View Related
Oct 28, 2012
I watched Matt Kloszowki's LR killer tip on borderless printing and followed his instructions but my 4x6 print only fills about a 40% of the paper and I'm not getting the full image. I added a border to outline the edge of the =print whic I scanned. What do I need to do to print the full image?
View 5 Replies
View Related
Oct 21, 2012
For some reason, my autocad application will not display the text type on screen correctly. This began on Friday of last week (10/19), and remains today (10/21). It is not simply one drawing file, but all drawing files that I open. When I initiate the MTEXT Editor, the correct font appears, but not in the drawing window.
View 1 Replies
View Related
Apr 2, 2012
I'm having trouble making a custom size print, in LR4.
View 1 Replies
View Related
Jun 27, 2012
I am using lightroom 3.6 and I would like to know how to print an image at 100% of it's size for a given resolution. In other words without any ipscaling or interpolation.
View 8 Replies
View Related
Jun 14, 2012
I am trying to visualize a print candidate (without printing) in real size (e.g. print jpeg to file). For that I think need to define the ppi for my screen, which is nowhere to be seen.
View 6 Replies
View Related
Sep 4, 2012
i have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
View 1 Replies
View Related
Feb 28, 2014
I'm trying to lay out an 8x10 cell in LR5. My page is a custom package and set up as an 8.5x11 sheet . When I click to add an 8x10 cell, I only get a cell that is ~ 8x8 and I have to drag the bottom down to 10".
View 2 Replies
View Related
Apr 11, 2012
Can LR 4 display the image (document) size in inches? The only metadate I can locate provides this in pixels, My current solution is to open in Photoshop then to Image-Image size-document size. .
View 2 Replies
View Related
May 2, 2011
The lines apear with different width, but they have the same properties (layers, pen , thickness etc...). AND THERE s NO supperposed lines. The only thing different is one have vertex z, and the other only x and y.
Have tried following solutions:
match properties,
flatten image (all z with 0),
repair archive with audit, regen
copies past theses line in a new archive,
print with different printers...
nothing change.
Something more strange there, when i draw line they are with x and y vertex. When i draw circle it have also z vertex, wich made another apprarence... .
View 6 Replies
View Related
Feb 16, 2014
I want to print custom size photo with LR4 and my Epson R2880, Epson driver v8.27, on OS X 10.8.4. In LR4 Print Module I set the cell size slightly smaller than an 8x10 (same aspect ratio but smaller by about 0.5 inch on both sides) on a Letter size paper. In the Epson driver I have tried all sort of options but no matter what I try, the print always come out exactly 8x10.
View 4 Replies
View Related
Jun 22, 2013
If I want to print on large paper sizes, e.g. A3 or A2, what is common wisdom:
- Set the paper size in LR and let LR blow the photo up;
- Edit a copy in PS and use the PS Size command to blow it up.
I mean if the magnifier routine in LR is the same as in PS one would expect the same result, right?
View 1 Replies
View Related
Jan 19, 2013
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies
View Related
Apr 10, 2008
Is it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies
View Related
Mar 11, 2014
I have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
View 1 Replies
View Related
Oct 24, 2013
Why is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies
View Related
Jun 13, 2012
I have a template with layouts of different sizes that had been working fine with a previous Xerox 6204. My D size and E size automatically oriented with the 36" side parallel to the roll feed. I have since moved to a job that got a Designjet T2300. On this machine the D size orients the 24" side parallel. This wastes 1' of paper on the left and uses 1' extra as it runs the 36" side perpendicular. I have been unable to rectify the problem. I have tried printing in portrait, that actually cut off some of the image. I have tried all types of rotation within the driver and layouts. Tech support had me going into the machine settings and set rotation to 90. Nothing. There is a warning that "HP utilities" is not installed. Could this be a remedy? When the tech came to set up the printer he installed the necessary drivers but mad no mention of this utility.
AC2012, HP desighjet T2300
View 1 Replies
View Related
Nov 12, 2013
I want to get a quarter of a circle. I have drawn a coloured circle but cannot see how to crop it to have exactly a 90º angle (a quarter of the circle) with no edge.
View 3 Replies
View Related
Feb 17, 2011
Our supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.
View 9 Replies
View Related
May 18, 2009
Just upgraded to CS4, and everytime I use the erasor, the outline appears as a quarter circle. It still erases in the circle pattern, but makes it hard to work like this. Any ideas on how to fix this?
View 10 Replies
View Related
Jan 9, 2003
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
View 2 Replies
View Related
