InDesign :: Anchor Full Page Image To Spot In Text?
Apr 1, 2014
Been working forever on a lengthy project with lotsa text and lotsa of photos inline with the text.
Whenever I do any minor modifications anywhere in the text or spacing, of course all the photos move to the wrong places.
Unless the photo is a small one and is placed truly within the text, in which case I can anchor it and it stays where it belongs.
but sometimes the photos w/captions (grouped) take up a full page.
Then there is no text on the page to anchor them to.
Is there anyway to anchor them to the text on the previous page?
View 29 Replies
ADVERTISEMENT
Apr 1, 2014
I'm printing a document trying to get two out of each page. I imported text, formatted it within Indesign cs3 and not it's time to copy the block and paste it onto the right side of the page. But the pasted version had a .50 tab at the first word which does not exist on the original side. How do I fix this?
View 7 Replies
View Related
Mar 27, 2014
I made this gorgeous table of contents with nice paragraph styles and a text frame on the master page. I put the text in the first frame and that filled my pages as intented. After that I used my paragraphs titles and the table of contents was done. But now I have a problem because I need to change the page order. I'm completely lost cause now my document is a mess. So is it possible to make a table of contents without using connected text frames because I know that I will have to change page order later and I want to avoid the mess I just made?
View 1 Replies
View Related
May 28, 2009
I have created a new master with a header, footer and main content region. The main content needs to be editable for each page I add to the document but I can't for the life of me figure out how to do it! Has this changed since the first Indesign CS?
So the header and footer will remain the same throughout the document - if I change that in the master it will then change throughout. The text region will also remain the same throughout but I should be able to add content to that region on each page I create in my document. At the moment I can't. It won't let me select that region I've created on any of the pages in my document.
View 5 Replies
View Related
Dec 18, 2012
I have an image. I have some text. How do I anchor the image to the text?
View 4 Replies
View Related
Mar 14, 2014
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies
View Related
Apr 1, 2014
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
View 2 Replies
View Related
Mar 4, 2014
Indesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
View 10 Replies
View Related
Feb 4, 2014
I'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies
View Related
Mar 4, 2014
With both tools, I can make a few changes and then both will leave a black brush spot. It works, and then it is like the program is too challenged & it just leaves a black spot. Sometimes if I move my mouse to the history panel to back up to get rid of the black spot I get a swipe of the tool all across the image when I'm reaching with the mouse to go back in history.
I'm using PSE 11 and a Macbook Pro.
View 8 Replies
View Related
Apr 1, 2014
why InDesign treats working with four spot colors differently than working with CMYK? They are just four colors or channels, right? What is the difference between Cyan or PANTONE Reflex Blue?
It is true that 99% of the time CMYK is used. It is also true that you can work in CMYK and tell the printer to put a different ink instead of the a Cyan, Megenta, Yellow or Black ink. The project I work on now involves four Pantone spot colors and a few illustrators how need/want to see what they are doing, so...
InDesign is so slow working with spot colors. It feels slower than Quark Xpress 4.11 on a Mac OS 9 G4 machine.
[-> InDesign CC, MacBook Pro 7i 2011, SSD, 16 G RAM, 1 G GPU]
View 14 Replies
View Related
Apr 14, 2014
Im having trouble exporting a pdf with a spot colour from ID. Just one part of my logo is showing as thicker once its exported. I can place in the exact same artwork but using a CYMK colour and the thick shape doesnt show. Im placing an ai. file.
View 4 Replies
View Related
Sep 29, 2011
I'm using X3 and I have a page I need to make a few inches longer. The problem I have is that if change the page size the contents get centered in the page so I have to move the back to their positions. IE if I have some text 1 inch from the top of the page and I make the page 2 inches taller my text is now 2 inches from the top of the page. Is there a way to tell CorelDraw to just add 2 inches to the bottom of the page and not reposition everything?
View 6 Replies
View Related
Mar 9, 2011
I know how to do this on Indesign...but I do not have that programme at present. I am using photoshop CS3 and am wanting to design a tattoo. It is an outline of New Zealand with some song lyrics inside as inspration due to the Earthquake we have had in Christchurch.
Is it possible for me to do this in Photoshop (roughly), or not? I have tried to look but I don't even know what it is called for the task I am trying to do!
View 6 Replies
View Related
Jan 31, 2012
I'm trying to wrap the text around an image in InDesign - it works fine when the image is to the left of the text box, but when I move it to the right it's not having any of it.
View 5 Replies
View Related
Jul 12, 2013
Need to control playback of the animation based on an anchor in the web page. When the anchor comes into the browser viewport, it would trigger play, pause or stop.
And ... to control the flow/direction of the animation playback based on scroll direction.
The setup:
I would like to have the playback direction for Edge animations placed in a web page, to follow the web Surfer's scrolling direction.
Scrolling down or right, Animation plays forward.
Scrolling up or left, Animation direction plays backwards,
But, that's not all ... I would like to combine the scroll direction sync with ... Anchors
Image if you will:
Multiple Edge animations are placed at various positions on a web page.
Autoplay for each is turned off.
Wish to individually control the playback functions for each animation. - Start - Stop - Pause.
Wish to trigger their playback relative to when an associated anchor (becomes visible / invisible) is inside or outside, of the browser view port.
Sounding complicated?
I put up a web page diagram to illustrate the functions. [URL]....
View 1 Replies
View Related
Sep 27, 2011
I'm building a site with WordPress and installed a plugin that will create a slider of images on the front page. For each image, there is specific text that goes with the image (just a simple quote). If it's possible to use Gimp to add text to the side of an image and not actually on the image?
Here's a link to the front page of the site that I'm attempting to add the text to. Currently, the photos are there and you will see the blank space next to the images. This blank space is where I would like to add the text. I've contacted the creator of the plugin and there is no way of doing this from within the plugin, itself.
[URL]......
View 1 Replies
View Related
Jun 21, 2007
I create a graphic that has the dimensions of a standard piece of paper (8.5in X 11in) and then i savedit on a disc for my friend and he goes to office max to print it out and it comes out with a border... Is there a way to get rid of the border or can printers just not print full page.
View 6 Replies
View Related
Apr 1, 2014
is it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
View 1 Replies
View Related
Apr 5, 2014
I need to create a 100 -150 magazine that will perfect bound. We have an InDesign file that we normally use for a 28 page saddle-stitch magazine. Should I use this same file and build on it? Or should I create separate files for the different sections? Can I bring the sections all together at some point? What about page numbering? I am obviously new to InDesign.
View 4 Replies
View Related
Feb 6, 2014
I need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
View 3 Replies
View Related
Mar 2, 2014
Why does my InDesign page move when I am dragging text blocks or objects -- when trying to position objects.
I've turned all the "snap tos" off where I can find any
View 1 Replies
View Related
Feb 16, 2014
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
View 4 Replies
View Related
Sep 27, 2012
I have been trying to mess with and target "tints" via javascript but either I am not understanding something or it cant be targeted as I had hoped, so I am looking for direction and guidance. I have a spot color assigned in the color swatches palette, and have drawn a few boxes on the page using this spot swatch. I then try to alter the tint using JS code.
sel[i].tint = // whatever number
alert(sel[i].tint) // This alerts fine
The alert shows a change taking place but it never gets applied to the item, the actual item never gets changed. I know things are properly targeted as I can change other attributes fine. When I look in the JS documentation it just shows for when creating a new spot, not for ones that already exist on items, I cant seem to find an example otherwise.
Can tint be adjusted for items on the page that have a spot color applied?
View 8 Replies
View Related
Aug 6, 2013
I am trying to print a full page borderless 11" x 8.5". The long side (11") cuts off about 1/16 of an inch.
I have tried using two different printers using the same 8.5x11" glossy paper.
If it is not the printer, it must be some setting in Photoshop (CS6).
What an I missing.
View 7 Replies
View Related
Feb 19, 2007
I scanned it in 3 scans at 300 dpi and pieced it together in photoshop...
Now I want to be able to put it on my website, with the text readable of
course. So what would be my best approach here.. a pdf might be okay, but it's also nice for the web user not to have to view a pdf file especially if they do not have the reader ...
View 1 Replies
View Related
Feb 3, 2014
We're running InDesign CS6 (version 8.0.1) in my office. When we override and delete a master page item from a page then save out the PDF, the deleted item still shows up in the PDF.
Example: We typeset a string of 250 trading cards. Each card is a separate page, in a single InDesign document, and are all based on one of several possible master pages. On the master page for a given card there are some graphic elements like symbols and directional arrows. During typesetting on a card that uses that specific master page we find one of the pointing arrows needs to be oriented in a different direction. We override the existing arrow and delete it, then replace it with the correct arrow (the arrows are placed graphics). The old arrow is no longer visible in the InDesign file. When it comes time to export the file for the printer we run a script that exports each page as a separate PDF. When we proof the PDFs, the card with the arrow adjustment still shows the deleted arrow, it is visible beneath the new arrow. If we save out that page by itself (with the script or manually), this problem doesn't occur. It only happens when we save out the entire set of cards at once or as a single, multi-page PDF. Though we typically use a script for the export, we still get the same result if we don't use the script.
View 6 Replies
View Related
Jun 24, 2013
Before I flame off on this crap CC version of ID: Why isn't my art centered when I resize my document? I have the center box selected at the upper left as I always do but as soon as I change the page size, the orientation is top left and all the art is hanging to the right and below my new page size. I'm not doing photo retouching. I can't read any of my menus.
View 31 Replies
View Related
Jun 11, 2012
I'm trying to create a 12 page interactive PDF with a set of 12 buttons (set in the master page) at the bottom of page that relates to each page. When clicked the button should you directly to that page.
I have used this method many times before in CS5 using Go to destination in Buttons and setting each page as a destination. It normally works great.
However, in CS6, once I export to interactive PDF and open in Acrobat Pro the buttons all seem to disappear once you click on the 3rd or 4th page button.
I have stripped the indesign doc back to include no other content - just the buttons, with no rollover effects etc but I am still having the same problem
I can supply the relevant indesign doc and exported PDF. One forum member suggested trying to open it in Acrobat Reader instead and it worked fine. This is OK to a point but I really need it opening in Acrobat Pro.
View 21 Replies
View Related
Mar 28, 2014
How can I get page numbering to work correctly?
View 5 Replies
View Related
Nov 5, 2013
I have a 5 section book which I need to print. I usually export to a PDF then re import into a single indesign document. Then use print booklet to print the book. My problem is that I need bleed on my pages so I have set my page size to O/S A4 (32*22.5) When I export to PDF the pages end up A4. How can I export so the page size remains the same?
View 15 Replies
View Related
