InDesign :: CS6 Crashes Moving Pages Between Documents?

Feb 7, 2014

I have on several occasions experienced a crash (more specifically "InDesign has stopped working and needs to close" - that's a crash I think) when moving pages between different InDesign documents (some were converted from CS3, but saved as CS6 files first).  It seems to happen only betwixt select files.  I have avoided a crash by moving even numbers of pages - but not always.  Perhaps I am unaware of some document/spread shuffle setting?

View 1 Replies


ADVERTISEMENT

InDesign :: How To Maintain Spreads After Moving Pages From One File To Another

Feb 13, 2014

I'm consolidating several book chapters into one Indesign file, by way of clicking on the thumbnails on the Pages panel and selecting 'Move Pages...' from the contextual menu.
 
The problem I'm having is that I can't maintain the page flow between chapters on the destination file, resulting in a broken spread between chapters when exporting to PDF. Here's a screenshot to better illustrate the problem, here seen in between pages 18-19:
 
I've tried turning on and off the following options on both the source and destination documents but nothing changes:
 
- Allow Selected Spread To Shuffle

- Allow Document Pages To Shuffle
 
I've also removed all the sections from the destination document (as you can see on the screenshot, page 19 does not have the little black arrow which denotes a new section), with no luck either.
 
I also tried dragging the thumbnails manually but to no avail; I just can't figure out how to keep the page spreads between chapters together.

View 2 Replies View Related

CorelDRAW X5 :: Page Up / Down Keys With Documents With Facing Pages

Apr 21, 2011

When working on a document with facing pages, with previous versions of CorelDraw htting the page up or page down keys on the keyboard would change to the next set of pages.

With Draw X5, you have to hit page up or page down twice to switch to the next set of pages.

Not a huge deal to hit it twice now, but is there a way to set X5 to the previous behavior where with facing pages one page down would take you from page set 1-2 to 3-4?

View 10 Replies View Related

InDesign :: Different Odd And Even Pages?

Apr 1, 2014

InDesign CS4
 
Have a 100 page document as several chapters in a book.
 
How do you apply a Master Page to all of the odd numbered pages?
 
Or, simply, how do you apply different headers and footers for odd versus even pages; through the whole document and across chapters.

View 1 Replies View Related

InDesign :: Proper Way To Format Documents?

Mar 5, 2014

I have a multi-page document with different topics, photos, graphs, etc. I've set up multiple text boxes for each topic and placed photos in their own containers.

I need to add about a half page of content to the 2nd page of the document. However... you can't just "press enter" like you would in Word and have everything move down. Do I have to actually move it all manually myself? It makes it even more difficult by the fact I only have half a page of content to insert, so everything that follows will also need to be separated to maintain consistency.

It wouldn't be much of a big deal if I was inserting an entire page of content because I could just insert a page then.

View 6 Replies View Related

InDesign :: Pages Are Not Showing Up

Feb 21, 2014

when starting a 20 page book the pages do not show up in CC

View 3 Replies View Related

InDesign :: CC Create An Index Using Multiple Documents

Apr 16, 2014

Can InDesign CC create an index using multiple documents (i.e., the chapters of a book)?

View 3 Replies View Related

InDesign :: Move Pages From One Document To Another

Apr 3, 2014

I am trying to move pages from one document to another. I have used all methods-drag and drop, using the move menu from the pages panel, etc. However, when I do move the pages, the pages that I moved appear in the new document with the master page items from that document on them, which I do not want. Also, I have multiple master pages in each document.

View 6 Replies View Related

InDesign :: Pages Panel Looks Distorted?

Mar 10, 2014

I'm working to apply master pages to a document for page numbers and such, and the pages panel looks distorted and won't load properly.  I have tried starting and restarting the program and computer.  The document works properly on another program in my office, but I really need it to work on mine.  I am running InDesign CS6 8.0.2.
 
how do I move a master page number over a box, creating the background color?  Do I have to apply it in another layer?

View 3 Replies View Related

InDesign :: How To Remove Two Blank Pages

Feb 17, 2014

When i try to print a perfect bound for my 66-paged document it keeps creating two new blank pages, how do i remove that 2 blank pages?

View 4 Replies View Related

InDesign :: Exporting Files From Pages?

Apr 1, 2014

I just downloaded InDesign. I have been getting away with using Pages on my Mac but I need bleeds and crop marks now and thus need InDesign. I have produced a brochure on Pages and it's ready to go. In the past I was able to use Adobe Reader or some other export to produce crop-marks for print ready material but it has all changed so I am forced to us InDesign. I will (eventually) train on this properly, but in the meantime I have time sensitive material. Is there a way to export my Pages document to InDesign? I tried to do a .pdf but the import into InDesign came up really bad (pixeled etc.) OR am I doomed to redo the whole project?

View 3 Replies View Related

InDesign :: 5.5 EPub TOC - Suppress Automatic Entries For Documents

Jan 1, 2012

I used separate .indd files to create chapters in a ePub book using CS 5. I upgraded to CS 5.5 and created an ePub from the same files (after conversion), and noticed that the TOC was simply a listing of the filename of each .indd. I checked "Use InDesign TOC Style" under "Content" in the "EPUB Export Options" and selected the proper style, but this made no difference. In CS5, there was an option called "Suppress Automatic Entries For Documents" that eliminated this problem, but for some * dumb * reason Adobe decided to remove that check-box in CS 5.5. So how exactly do I suppress the TOC from listing every filename in CS 5.5 and instead list the selected TOC style?

View 12 Replies View Related

InDesign :: Easiest Way To Transfer Long Documents To A Different Template

Apr 17, 2014

My company is currently rebranding all of our materials which consists of hundreds of thousands of long workbooks, guides and handouts. The original documents are all in InDesign but now we are moving everything over to a new template layout and I'm trying to find the least painful, and most quick way to do so.

View 3 Replies View Related

InDesign :: How To Export Facing Pages To PDF For Print

Mar 5, 2014

I have a InDesign document and I am trying to export to PDF for print. My facing pages are always exported as sinlge pages and I don't know how to prevent that. I can use the interactive PDF as this is for print.

View 3 Replies View Related

InDesign :: Script For Switching Objects On Odd And Even Pages?

Mar 5, 2014

Script for InDesign 6 that will replace one object with another depending on whether the page is odd or even?

View 18 Replies View Related

InDesign :: Correct One Word And It Appears On All Pages?

Mar 22, 2014

I am working on a 230 page book. In proofreading words...can I correct one word and have that correct
appear on all pages?Is there a control for that?

View 3 Replies View Related

InDesign :: How To Override Master Pages For The Entire Document

Mar 24, 2014

how do you override master pages for the entire document, not just page-by-page? I have a multi-page document and want to ba able to edit type of all pages but the text areas are locked.

View 16 Replies View Related

InDesign :: Book - Remaining Single Pages Into Spreads

Apr 19, 2014

I'm exporting a Book to PDF in spreads:
 
[Document A]
[Document B]
 
Document A ends with an even (left) page. Document B starts with an odd (right) page. I want those two pages to merge into a spread when I export to PDF, which simply doesn't happen. I'm left with two single pages instead. I have tried every option under Book Page Numbering Options. All my pages and spreads are allowed to shuffle. I'm working in InDesign CS6. I've wasted two whole days trying to figure out if this is even doable.

View 2 Replies View Related

InDesign :: Alternating Master Pages (non-spread Layout)

Sep 19, 2011

I'm putting together a book for a client, and the publisher wants the files in a single-page layout pdf.  It's a book, and I want the opposing pages to have wider spine-side margins, so I'd like to be able to set up every other page with a different master page to accomplish this.  Is there any way to automatically set this up?  I'd hate to have to go through and manually select every other page of a 200+ page document and set the appropriate master page.

View 6 Replies View Related

InDesign :: Autoflow flows All Pages To Textboxes On One Page?

Feb 4, 2014

I'm working on a document with tables, and when I ask it to autoflow, using the Shift- Click, after the first table, the rest of the tables are on one page, with long cylindrical text boxes, instead of the pages with large textboxes on them. 

View 1 Replies View Related

InDesign :: Unable To Detect The Correct Number Of Pages?

Apr 15, 2014

My InDesign document has a total of 55 pages. My page numbers are set up in a master. Some of the pages display the page numbers correctly: "Page X of 55" but others do not "Page X of 43". Why is it unable to detect the correct number of pages?

View 7 Replies View Related

InDesign :: Textframe On Masterpage & Individual Text On Pages?

Apr 3, 2014

Is it possible to use a textframe on a master page for means of common positioning of texts?
 
On pages based on this master page, I'd like to put individual text into this frame, or at least the exact location. Then, when I change the position of the textrame on the master page, the position of all textframes of the pages follow suit.

View 15 Replies View Related

InDesign :: Blank Pages Keep Inserting Themselves Into Text Flow Book Layout

Mar 17, 2014

I am working on creating a book layout for print. I opened the .doc file through my Mac text editor and placed in InDesign CC as a text flow. I am working on adding design elements now (after I adjusted the page layout of the text on all the pages) and blank pages keep inserting themselves in weird places (for instance page 7 will suddenly turn into a blank page and my text will move itself down while design elements such as chapter headings will stay in the place where I put them, but then be completely out of place according to where the text is now). I have tried to adjust it every way I can think of--- by moving all of the text up onto the new blank page and re-aligning the chapter headings, by moving the blank pages to the end of the book and deleting them, and of course, by just simply deleting them. (Deleting them just causes the layout to become mis-aligned even worse, and just re-adds the blank page I attempted to delete.)

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Pasting From Web Documents Causes Crashes

Jan 31, 2013

When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?

Version 16.2.0.998 on 64bit, Win 7.

View 3 Replies View Related

CorelDRAW X6 :: Moving Pages / Changing Page Number

May 1, 2013

Is there any way different than drag and drop  for moving pages in multiple pages designs. I have some presentation designs lately and have to change pages numbers or move multiple pages.

Drag and drop is not user friendly on 30-50 pages documents.

system configuration:

Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.

corel version:

X6 VERSION: 16.4.0.1280

View 8 Replies View Related

Illustrator :: CS6 (Mac) Crashes When Opening Large Documents With Drop Shadows

Aug 2, 2012

I have a Macbook Pro ver. 10.6.8 i7 Core, 8 Gb Ram, and I am running Adobe Illustrator CS6.
 
I have a document that is 18" x 42" and contains drop shadows. It was created using CS6. When I apply a graphic style (gradient and drop shadow) It has a progress bar that says "Drop Shadow" and it fills up and freezes. I recreated the document, and I am having the same issue repeatedly.
 
In order to do what I needed, I had to ungroup the letters recieving the graphic style and apply it to each letter individually. If I try applying it to more than one object, the freeze happens again.
 
I saved the file I created, and now I can not open it. On load it has a progress bar that says "Drop Shadow" and it fills up and freezes.
 
I can open the same document in CS4 on the same system with no issues, it takes less than 5 seconds to load.

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Combining Pages / Moving Objects To Single Page?

Sep 17, 2013

I've been exploring migrating my Design and PrePress departments away from Illustrator & Flexi and transitioning to Corel. Unfortunately I've hit a major stumbling block

Right now I have a team of designers laying out sign designs. They draw each sign and we generate a message schedule for those signs in excel. From there, we've been able to use the print merge function in Corel to transfer all the messages from the data sheet to the signs. The problem is, each sign is placed on a separate page within the Corel file. I know you can then use print imposition to gang those signs for printing...but the problem is we have a laser engraver, rotary engravers and routers that are all being run. I've fairly certain we could "print" to the laser without any issues but I'm not as confident regarding the other machines.

Typically once we have the drawings of every sign created (currently doing this in Flexi), we have programmers that gang all similar components together on files that are used to power the rotary engravers. Because the print merge function in Corel puts each sign on a separate page, I'm not sure how we'd be able to transition without having to copy, paste and place each sign back on to a single page. Our jobs often run into the hundreds of signs so the extra labor required would kill any savings such a transition might bring us.

Is there a way to combine pages post print-merge, to get all the objects on a single page? I had really hoped to be able to gang all objects together on a single page within a single file.

View 3 Replies View Related

InDesign :: CS6 Crashes When Exporting To PDF?

Mar 5, 2014

I am running MAC OSX version 10.8.5 and every time i am trying to export a pdf from inDesign CS6 is chrashing. And i am doing the same loop again and again with the same results. The inDesign file is large (<8gb) and most of the items inside are embended. Thought i did this procedure several times in the past and everything was working fine.

View 9 Replies View Related

InDesign :: Setup Datamerge File To Create Multi Page Spread Documents With Fields On Different Page

Apr 1, 2014

Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week .  The merge documents have different and repeated merge fields on most pages. 
 
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread.  the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem).  but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc.  I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly. 

View 2 Replies View Related

InDesign :: CC Crashes When Saving As IDML

Feb 2, 2014

InDesign CC 9.2 x64  crashes when saving as .idml. I have tried reinstalling but the problem persists.

View 3 Replies View Related

InDesign :: Does Printing Pages With Ai Links Take Longer Than PSD Links?

Apr 15, 2014

I'm reconstructing an old document originally developed with PageMaker.  I've recreated a half dozen pages hopefully with more uniform techniques.  The original line art for the pages was created in AutoCad and some were scans.  To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format. 
 
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds).  The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process. 
 
I print these 50 page books on demand and that additional time would add about an hour. 
 
I guess the question is whether this is normal and to be expected or not.  If it is I'll likely turn everything into raster before going into InDesign.  That, however, seems like quite a bit of extra work.  Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved