When I go to file info, to edit meta data, It opens the window however nothing loads its just a blank window. Illustrator hasn't frozen it just stops loading the option and wont allow me to close it. The only way to do anything is to force quit and start again.
View 5 RepliesI have to imbed meta data to 2500 jpg images. What is the most efficient way to autmate this task?
View 5 Replies View RelatedI am using meta data "description" menu to add meta data to web images.The basics:title
description
keywords
copyright
That is about it for my application....so far and like I say it is just for web images at this point. At any rate to me surprise I did not realize how much the meta data added to file size.I had assumed it was minimal but in fact that is not the case. Meta data ends up adding a lot.
Question:
So is there a way in Photoshop to see what the final file size will be with the meta data included as I have found, so far, is the image itself file size when I view the
"Saving for Web & Devices" menu screen.Also tried the "Info" menu and neither indicate the meta data additions into an images file size.
One of the reasons is, of course, that I would like to get as many keywords in there as possible, as an example lets say this was the logo or site's header and they have a lot of different products.
The more keywords the better the SEO results will be. I am sure this statement in itself is disputable but as of now 5/2013 it appears that way as far as SE's are concerned.Tested this extensively and the result were remarkable, but that is another story.
Can I apply the meta data to the files when I am not connected to the physical storage place of the files? Are the meta data stored in the catalogue or are they somehow connected to the actual data file??
View 3 Replies View RelatedI have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken.
When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original metadata. Is there a Photoshop setting or plug-in that will force the software to preserve/retain the original metadata?
Since today I'm using "Lightroom 5.3 RC for Windows". When I export to jpg the Exif meta data contain a Exif tag "Software", the value is "Adobe Photoshop Lightroom 5.0 (Windows)". Why doesn't this tag show the version number "5.3" (or "5.3 RC")?This behaviour has been at all prior Lightroom versions I know.
View 2 Replies View RelatedThis is for Mac OS 10.3 CS2- One of my sources for photos has recently been routing jpeg's where I receive the prompt: "This file contains file info data which cannot be read and has been ignored."
Nothing earth shattering there, probably a meta field CS2 is having issues with. The issue I encounter, is when I try to save it as a .psd I receive the prompt: "Could not complete your request because of a program error."
The file is otherwise complete, and there is no truncating. I've tossed it into bridge, which isn't my strong point, and can't seem to find anything that screams anomalous there.
I've got a work around where I can save the file as a tif prior to my edits, then open it, edit, save as a .psd... So this is more of a curiosity item for me. Has anyone seen anything similar to this? Would it be a meta issue or something in their jpeg processing that causes this?
Well, ran into an interesting filter result which looks similar to molten metal or something you would get with meta balls in a 3d program. Preety easy to get it too, just use your filter-render-fibers (default setting will work) then your filter-sketch-plaster (again, default settings may work) and whola. Playing with the setting in the plaster window will give you more or less metal as you see fit. Simple and maybe of some use to some...
View 9 Replies View RelatedI was wondering if there is a plugin or app that I can use to either edit or erase the Exif camera data in Mac.
View 1 Replies View Relatedi have imported a shp file into dwg with their attribute.
how i can display any fields(BLGDID) in autocad dwg. and can i edit this by simply double click editing. can it update in object data's same field.
i dont want to use ADEEDITDATA but task is same .
any simple way
how I can edit all of the jpeg properties data.
View 1 Replies View RelatedI'm using the ribbon in 2012. I've got a drawing index sheet I want to update, and what I need to do to get to the Edit Data Link command is switch to the Classic interface and select the table in order to display the Table toolbar with Edit Data Link button.
I cannot find this anywhere on the ribbon, and the same button icon as Edit Data Link on the Table toolbar runs Data Link Manager from the Annotate tab, Tables panel on the ribbon, which is not what I want.
Where is this on the ribbon? And how come identical tool buttons run different commands in different workspaces?
The way it looks I should be able to edit the propertyset data though an XRef... but all the properties are grayed out. I thought it was because I also had the XRef open... so I closed it. Still the same result.
The discription says "Edit property set data in the current drawing or through external references. Add or Remove property sets."
Am I not understanding the tool - or what?
I have a number of unchipped manual focus lenses (Zeiss and Nikon). As a result, no lens information is recorded in the EXIF/Metadata file. How am I able to update this information? What applications are available to use if not by Adobe. Note: I do use LR3 and PS CS5.
Currently under the library table and Metadata filter these unchipped lenses read "0.0mm f/0.0". Note I do use the set up in my camera menu to notify the camera's focal length. So when I move the cursor over the photo is will indicate the focal length. Its just this information can't be used as a filter or for search.
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
I want to add an attribute to a BLK file I have from a past release. Using this .BLK file, I can create a table from attributes in my drawing using a LISP routine.
It seems there is no way to create or edit a .BLK file that I can use for this in ACAD 2011, it only creates .DXE files.
The problem with the .DXE file is that is saves the drawing that the original extraction is performed on. When I use the .DXE in another drawing, it uses the original drawing data unless I manually "delete" the old drawing reference using the dialog box in the extraction wizard.
The .BLK file works perfectly, but I want to add an attribute. How can I create a new, or edit my old .BLK file?
Will I have to reinstall an older version of AutoCAd to accomplish this?
Seems like Multi-View Blocks are like that hot red-head in high school that you really want to get to know until you get to know them.
I made a bunch of blocks for my electrical plans. Annotative symbols for plan view, 3D blocks for model view, and elevation blocks for elevations. I then started creating the MVBs.
Upon insertion the annotative blocks appear super small and the model view blocks scale way up. The model view blocks are not annotative and are not supposed to scale at all. It seems MVBs see any block inside that is annotative as an indication that the entire MVB shall be annotative. Fustrated, I finally found a work-around that is a bit half-arsed:
I made another block as a sort of holder for the annotative symbols that was set to not be annotative and inserted that into the MVB. VOILA! the MVB itself doesn't scale, but the annotative symbol inside the non-annotative block does. This works fine except for one caveat: I can't edit attributes that are in blocks inside of blocks. If I made another block to use in the MVB for the attributes, it would work, so long as I don't make it annotative, which isn't what I want.
So, A) is there a better work-around than the block-in-a-block-in-a-multi-view-block method, or B) Is there a way to access and edit attribute data of sub-blocks inside a MVB?
Maybe my next thread will be about red-headed Multi-View Blocks with carpets that match the drapes.
Edit: Running ACA 2009
I am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
With CS6, why can't I output eps data from PDF, as I could did in use with CS zero version?
View 1 Replies View RelatedWhy when I copy data from one cell to another or import it from excel it becomes unusable?
So, I copy (ctrl C) small and paste it (ctrl V) |small@UY1/4
I've an illustrator document that has a code badge design. The bade design includes a 4 digit code that will alter 61 times but only in terms of the digits. I've set up my artwork into 2 layers with type on the top and the graphic underneath. Is there a way of using a script or code to export the graphic with each of the 61 codes or do I need to modify the Ai file 61 times and export 61 seperate raster images?
View 1 Replies View RelatedWhere I can find the button to add data labels to a column graph?
These are the numbers/percentages that appear at the top of the column once it's been generated so you can see that is was say 50% or 60%.
We have adobe design suite installed in MAC OSX 10.7 and this crashes often and also deletes the data. Enclosed is the snapshot of the error.
View 1 Replies View RelatedI am using AI to import anatomical tracing data (paths and symbols). The data coordinates are in millimeters. I create an artboard as follows:
The file import code reads the data and then passes the bounds data to the art routine, CreateDataArt, as minv and maxv. As can be seen (abRect) the bounds of the data are 13 mm wide by 14 mm top to bottom. Two paths are then drawn into the artboard as shown here:
Note that the rulers are in millimeter units and that the art board is nowhere the correct size.
I received files from a freelance designer in Illustrator CS5 format, but my company only has CS4. Although she saved the files for CS4, I still have problems with data loss, for example all the text is broken up into separate text blocks, the layers are lost, the items are all in a clipping masks, objects are randomly grouped together, etc. is there any way to convert the file without data loss?
View 3 Replies View RelatedI'm laying out a report with many graphs of similar styling, the client is to provide an Excel doc with the figures and I need to redraw them as graphs.Is it possible to design the graph style in Illustrator, import the data from the spreadsheet to the graph and then place the graph(s) into InDesign. Essentially, this is what I'd like to achieve:
1) Style/design a graph in Illustrator
2) Import spreadsheet data into Illustrator graph (a step I'm also haveing problem with - is it possible to import an entire Excel doc or do you have to copy and paste each cell individually)
3) Import Illustrator graph into Indesign
4) If original data in Excel is changed/updated and the document is saved, data will update in Illstrator and therefore in InDesign.
I would like to open a file dialog box seltect a CSV text file saved from Excel and import this into an array/variable/dataset in adobe illustrator using javascript. Have done some work with javascript but not a power user. Can't work out how to get the open dialog to appear.
Long term aim would be to use the data to plot a path which seems straighwforward enough, its the getting the info in bit I'm stuck on.
You do have to be able to select the file to import, this bit quite important.
I create pie graphs in illustrator for a financial sevices group. Every month when I update the data the format and colour of the graph distorts. I am spending too much time manually fixing the graphs.
View 3 Replies View RelatedHow to get data values to display inside the columns on a column graph?
View 2 Replies View RelatedIn AI CS5 the size and position of an image were displayed in the top toolbar when you selected the image. This is missing in AI CS6, how can I get it back?
View 2 Replies View RelatedI`ve made a correspondence analysis in excel and want to get a scatter plot as .eps-file. I`ve imported the X and Y values in Illustrator and created a scatter plot. Now I would like to represent the numbers of data points (like in the illustration below).
View 1 Replies View Related