Illustrator :: Having Data Values Display Within Column Graph
Jun 6, 2012How to get data values to display inside the columns on a column graph?
View 2 RepliesHow to get data values to display inside the columns on a column graph?
View 2 RepliesI have a column graph. I want the data values to display in the columns. How do I do that? Here's what I have now:
I want the values 270018, 283148, etc. to display in the graph. Is that possible?
Where I can find the button to add data labels to a column graph?
These are the numbers/percentages that appear at the top of the column once it's been generated so you can see that is was say 50% or 60%.
When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
View 4 Replies View RelatedI need to insert the standard deviation in a column graph created in illustrator...how can i do this?
View 3 Replies View RelatedAdding prefixes and suffixes like the percentage sign, degrees, currency and other units to Illustrator graph tool Axis labels is relatively easy: you go to Object > Graph > Type then Value Axis then fill in the Prefix and Suffix boxes under 'Add labels'.
There doesn't seem to be any way, however, to add such signs and symbols to the labels that show column totals on each column in a bar or column chart.
Adding prefixes and suffixes to the value axis labels - works on the axis, but isn't repeated in the column total labels.Adding characters to the text that defines the labels (the %02 etc that is grouped in the design that is then applied to the columns). Adding anything past the 3rd character seems to simply break the link with the text and the data (e.g. adding a percent symbol like %03% just prints %02% in each column, as does adding it in quotes, after paragraph breaks, etc)Adding the prefix or suffix in a separate point text item doesn't work because you can't predict the length of the column total and because it won't apply any kerning with the adjacent character.I can add the symbols in manually, but it's time consuming, and has to be re-done every time the chart is refreshed.
logical equivalent of a feature that exists for axis labels.
I create a column graph, I set my column styles, modify the text and other attributes to how I want them to look but if I change the data the whole graph keeps reverting back to the basic chart. Is there anyway to stop this because its really irritating when I need to create a set of 20 graphs.
View 2 Replies View RelatedIs there a way (plugin?) to add values on top of Illustrator Stacked Bar Graph? In the picture attached the numbers on top of the chart color areas are inserted manually. In powerpoint those can be added automatically.
View 2 Replies View RelatedI can enter negative graph data and have the affected graph bars extend below the 0 line no problem.
with flatm 2D-appearing column designs, this isn't much problem; graph column designs which are meant to be 3D in appearance, ie with depth/both, simply appear flipped and the bottoms of such columns don't respect the correct vanishing point, such as a 3D solid bar type column. Is there a way to make such dimensional graph bars look correct visually when their data values go negative?
I'm laying out a report with many graphs of similar styling, the client is to provide an Excel doc with the figures and I need to redraw them as graphs.Is it possible to design the graph style in Illustrator, import the data from the spreadsheet to the graph and then place the graph(s) into InDesign. Essentially, this is what I'd like to achieve:
1) Style/design a graph in Illustrator
2) Import spreadsheet data into Illustrator graph (a step I'm also haveing problem with - is it possible to import an entire Excel doc or do you have to copy and paste each cell individually)
3) Import Illustrator graph into Indesign
4) If original data in Excel is changed/updated and the document is saved, data will update in Illstrator and therefore in InDesign.
I create pie graphs in illustrator for a financial sevices group. Every month when I update the data the format and colour of the graph distorts. I am spending too much time manually fixing the graphs.
View 3 Replies View RelatedIn a new Illustrator file, I select "Object...Graph...Graph Type" and make sure I have pie graph selected. Then I draw the circle I want to be a pie graph, make sure it's selected and choose "Object...Graph...Data" which opens the graph data entry "spreadsheet" but the text box and buttons on the top are greyed out and there are no visible cells. If I move the pointer around inside the window, it does become the "row/column" resize pointer as if there are cells present but disabled.
View 1 Replies View RelatedI need to make some graphs that are linked to a series of data through XML files (originally Excel) and create an indvidual document for each data set. They will be used for the web and print.
View 2 Replies View Relatedthe rows/cells disappeared for my data in a bar chart in Illustrator CS5.5.The first number shows up but then I have to keep hitting tab but they are not divided into visible cells any longer.I usually see rows and columns like in Excel.
View 2 Replies View RelatedIllustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
I'm totally new to Illustrator and want to use the line graph tool to insert a graph that passes through 0,0 and runs to 24,24. I want the x and y axes to meet at the origin. As it isn't working as you can see. I've used 0, 0 and 24, 24 as my data points. Is there any way I can change how this is presented so it's clear that it's at the origin?
I'm using CS6, if that matters.
I'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies View RelatedCan you access graph data through the scripting DOM?
View 3 Replies View RelatedQuick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
Is there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View RelatedI am having trouble using the beam and column calculator in Autodesk Inventor. When I choose the beam that I want to test all the dimensions are not being put in automatically.
This is happening with most types of beams that I import from the CC the angle (6X3-1/2X3/8) that I am trying to test is getting no Wx, Wy, Wk or Jk. and the I beam (W6X25) is not getting Wk and Jk.
I want to add a column to my parts list, which displays a value based on a formula.
Lets say i want to show the submerged weight of a part; So i need to create a column, which can use the information about a parts volume and mass to calculate its submerged weight.
An easy formula, but is this possible in Inventor (2012 Pro)?
I know we all feel the difficulty in how ancient the graph / table tool in Illustrator is.
But, is there a way to display Data Labels on the front of my stacked bar chart?
See attached image - this is what I want to achieve.
I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies View RelatedI'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
I have used the example of Map Object-data. I try to change the Object-data definition from a character to integer to do other querys.
How Do I have to Change the Column definition of the object-data? Where I have to add the definition "as integer" or "as long"?
Set amap =
ThisDrawing.Application.GetInterfaceObject("AutoCADMap.Application")
'Create OD Table Definition
Set ODfdfs = amap.Projects(ThisDrawing).MapUtil.NewODFieldDefs
' Add Column Headings and Defaults
[Code] .....
I continue to suffer project downtime and setbacks due to a variety of defects in the software. Here formula columns are not working. I created a Formula Column for simply computing ItemQTY *Item Cost in a Data Extraction table for a current project.
QTO is defective, and now Data Extraction is not working. What does the product leadership expect us to do for quantity analysis?How can Quality Control of this software significantly improve?
I would like to link an Excel table to a SHP file via a column in commun. My SHP file and Excel Spreadsheet share one same column filled with numbers. So it's neither simply import Excel table, nor import with points.
But I don't know if I should use "Data Link" or "Add ODBC connection" or "FDO import", or some other fonctions...
I've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies View RelatedI want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
The attached lsp puts tick marks at equal distances along a line/polyline and tags them with the distanace value from the start point. I draw using millimeter units but things like chainage should be displayed in meter units. Using this routine displays the values in millimeter units which I then 'find and replace' to edit their values to meters.
Take a look at the lisp to see if it can be altered to input the mm value at the start but output the meter value to the text values?
Attached jpg graphically shows my request.