i know this question is very general but are there any tips on creating outer and inner corner points for pattern brushes in Illustrator? The pattern brushes that are already installed with illustrator have very smooth corner points that blend well, even around quite sharp inner and outer corners. But when i create my own pattern brushes, i just dont seem to get it right.
View 2 RepliesI'm using Illustrator CS6. When I create a simple overlapping daisy brush and apply this to a rectangular path the corner tile seems to have lots of nodes. I apply the brush to the path and then expand appearance. Image attached
View 2 Replies View RelatedIs there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies View RelatedHere I have a vector image. The pink stroke is a cut path that the software I use at work recognises and cuts. (Used for vinyl decals/stickers etc). All the lines highlighted in pink is useless to me, as it would cut out each individual line.
All I need is the outer edge of the entire graphic.
Note my crudely drawn red lines that border the image, that is exactly what I need. As you can see, the paths run through the image. BUT...When I try to erase the paths using add anchor point then cut path at selected anchor points so I can remove that particular segment, the colour essentially "leaks" as it isn't a closed area anymore. Rasterizing the image destroys the quality and I would like to be able to perform this task without loss of quality.
I want to use a detailed color photograph as a pattern brush, what is the best way to do it?
I have rasterized the photo, then used image trace high quality photo, then creates the new pattern brush and used it. But this makes the illustration super heavy and slows down my computer. Ia there a way to vectorize photos with high quality without having that many points in the vector?Or is there another way to use photos as pattern brushes?
I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedAll the default arrowheads are sharp corners. I need to make an arrowhead that looks sort of like Arial Rounded, where the arrowhead itself is rounded at the point and on the ends.
View 9 Replies View RelatedI have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
Does Illustrator CS6 give the ability to create custom bristle brushes, and if so, how?
View 1 Replies View RelatedI just want to select corner points and get the coordinates of all the points,and get all the points sorted by their X coordinate.What I am supposed to do?
View 4 Replies View RelatedI want to create a pattern that does not repeat (as a backrground). I've tried using swatches but this just repeats the same pattern. If you look at this example below, the pattern (behind the hands, log, etc) looks completely random. How would I go about recreating this effect? Would I need to draw the whole thing manually?
View 12 Replies View RelatedIn Illustrator CS4. I want to create a repeating pattern, using a swatch. I've done this before succesfully but not sure why this one isn't working as planned.
The small image at the bottom (just the area inside the artboard) is the spacing I want between the characters, but the pattern at the top is what I get.
I am fluent in Photoshop and semi fluent in Illustrator. I run CS6 for both.
No what I want to be able to do is create a repeating pattern that can then be printed as wallpaper and pasted to the wall. As you can imagine there are lots of hurdles to get your head round and I can find any support anywhere.
Traditional wallpaper is 53cm wide by 10metres long per roll.
The wallpaper will have either a 1/4 or 1/2 drop.
I need the pattern to repeat seamlessly top and bottom and left and right because its wallpaper! I have been experimenting with the pattern tool in illustrator but with no real luck. I can create a pattern that drops by 1/4 or 1/2 but it gets all weird on the vertical repeat so its unusable.
The first image has a brick pattern and the second a grid. In the first you can clearly see some lines. I do not have any stroke on the objects and no other objects on the artboard. Is there anyway to get rid of these lines?
View 1 Replies View RelatedHow can I create a tileable line pattern like the one on the image? (Illustrator CS5)
Is there a more practical way than drawing and duplicating lines? When I do that, and fill a shape with the pattern, I see gaps between tiles. Do you remember the same pattern on Microsoft Word? I want to create that, on Illustrator. Which method should I follow?
I am trying to create a seamless pattern brush in CS6 .When I use the no fill/no stroke bounding box placed behind the object to define the repeat, instead of cropping the object for the brush, it overlaps it. Here is an example:
When I do this in CS5- the bounding box works fine and crops out the space outside. Was there an update in CS6?
How can I create this verticle pattern within a circle? I have tried using pathfinder tools to stamp out the repeated verticle lines but that doesnt work.
View 3 Replies View RelatedI'm on the brink of insanity with creating my diagonal line pattern. I've tried everything I can think of but the pattern is an absolute mess! I want to create a diagonal line pattern but I want the lines not to be uniform. Basically I've made a group of 3 lines and then one separate line on its own, then to repeat this as the picture below. I've used the distribute function so the distances between the lines is identical everywhere. I've then rotated the whole thing exactly 45 degrees and aligned the lines to fit the bounding box in the "make pattern" mode as shown. Yet the resulting pattern is just a mess of overlap ugliness. All I want is for the pattern to literally look as it does in the image on the left, how to sucessfully do this in CS6?
View 6 Replies View RelatedI can't figure out how to create outlines (vector lines) for my patterns , as I need to laser cut the pattern, and all the lines have to be seen I use Illustrator CS6.
View 3 Replies View RelatedWhere can I get brushes like the ones below expect in a higher resolution/size:
View 4 Replies View RelatedLet's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
View 5 Replies View RelatedWhat I mean by "Holy Grail" is that intense outer glow of crosses in religious illustrations but that looks natural in photographs. I am looking for technique, filter or third party plug in.
I have product photos to create this type of outer glow but I also want it to look natural.
I am looking for a fast, easy and adjustable way to do this -- if at all possible.
I have created polka dots or even more complicated pattern in previous version illustrator. They are perfect. When i migrated to the CS5, the exactly same pattern always have a fine line in between the pattern swatches. After i export the artwork to jpg in 300dpi, they are still there.
View 16 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI can make patterns but stuck on how to apply them to the canvass using an array of brushes.
View 6 Replies View RelatedHow can you create an outline fade in Corel Draw like the outer glow in Photoshop? where the outline fades out.
View 12 Replies View RelatedI had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View Related1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.