CorelDRAW Graphics Suite X4 :: Create Outline Fade Like Outer Glow
Nov 6, 2013How can you create an outline fade in Corel Draw like the outer glow in Photoshop? where the outline fades out.
View 12 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X5 :: Create Outline For Outer Boundary
Dec 18, 2011Let's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Create Outline
May 3, 2011croatian chicken for forum.jpg
I need to outline this, and really don't want to have to trace the whole thing. What I have been doing with the rest of this persons design is duplicating it, getting just an outline by getting rid of whatever isn't needed. Making it a wide outline and then doing create outline to object, getting rid of extra inner lines, and then I have the outline (cut line) that I need. The computer is saying that this one is too much for it to do that.
I have to make it a tiny jpg in order to upload here. The original is made out of MANY lines, but I have a vectorized outline that fits it, but not an outline that is like 1/8 or 3/16 inches all the way around it. It is being cut out to go on vehicle doors, trailers, etc. The details are way too small to have it cut right up to it.
CorelDRAW Graphics Suite X3 :: Create Text / Some Space And Add Outline
Oct 25, 2011I want to create some text that has a outline but with a little bit of space in between the text and the outline. What is the best way to do this?
Usually, I will create text and add an outline. Then convert the outline to an object and change the color to whatever the background color of the document is. Then I will add an outline to that object (the one that used to be the text outline) and I end up with essentially two outlines.
It usually isn't that difficult but sometimes the text does not cooperate and when I add an outline it has all kind of gaps and points. So I guess I have two questions. why certain texts have those gaps and points when you try to outline them? Also, is there any easier way to make an outline that is not directly against the text like this.
CorelDRAW Graphics Suite X6 :: How To Create Outline Width Starts From Outside
Aug 28, 2013In corel draw x6 how can i create outline width that starts exactly from outside.
View 15 Replies View RelatedCorelDRAW Graphics Suite X6 :: Aligning Outer Object To Outer Path Of Center Object?
Jan 19, 20131. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
CorelDRAW Graphics Suite X4 :: How To Cut Outer Edge
Nov 11, 2011FBCL0017.jpg
I need to cut this football image out on my vinyl cutter, I tried boundry and contour but it keeps picking up the black center too. I need to just cut the outer edge.
Photoshop :: How To Create Holy Grail Type Outer Glow?
Jul 24, 2004What I mean by "Holy Grail" is that intense outer glow of crosses in religious illustrations but that looks natural in photographs. I am looking for technique, filter or third party plug in.
I have product photos to create this type of outer glow but I also want it to look natural.
I am looking for a fast, easy and adjustable way to do this -- if at all possible.
CorelDRAW Graphics Suite X6 :: Transparency Brush - Doing Fade On Curves
Jul 30, 2012If this is possible to have a transparency brush in doing fades on curves. the brush would enable to lighten spot colors when brushed over the curve or curves. you could make a whole graphic fade out around the edges just by brushing over the edges.
You could have the capabilities to adjust the amount of the fade on a tool bar. maybe this is out there, but it would save a lot of time when doing graphics for t shirts and you want to fade the edges of the image on the shirt. you rip program would define the half tones by the transparency fade.
CorelDRAW Graphics Suite X4 :: When Importing EPS File To X4 Colors Fade
Feb 13, 2013I have an eps file that fades in color when imported to Corel Draw X4. Could there be something missing in the Adobe Illustrator eps file that causes this or is it a problem with Corel?
I'm using Corel Draw X4 with the SmartDesigner X4 add-on package. Also, I recently added a sublimation printer to the mix. But, it doesn't seem to matter which printer I send the image to, the colors are faded in Corel draw even before I attempt to print.
CorelDRAW Graphics Suite X5 :: Outline Shadow
Sep 23, 2011My problem concerns about shadows of outline In fact, I want to create a soft, shaded border. Effect which I want to achieve can be seen in the picture below, basically it is a design of an soccer jersey.
I tried drop shadow technique but the result is too large and inaccurate shadow. Also, I tried to create an custom artistic media brush, but the result is not as I expected. Is it out of a job that Corel can perform ?
CorelDRAW Graphics Suite X4 :: Outline Color
Jul 10, 2012On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
View 14 Replies View RelatedCorelDRAW Graphics Suite 12 :: Scale Up Outline Along Path?
Aug 4, 2011Looking to see if corel has any way to scale an open outline along its path from one size to another. So for example a curvy open ended line would start with a stroke of 2 pt and end with a stroke of 20 pt?
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Outline Width Of Object Set To 2 Mm
Nov 19, 2013I use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
CorelDRAW Graphics Suite X5 :: Sizing Outline With Image
Aug 30, 2011Is there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
CorelDRAW Graphics Suite X4 :: Turn Off Outline Resizing?
Jul 9, 2013When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
CorelDRAW Graphics Suite X4 :: Place Cut Outline On Image?
Sep 24, 2011I am trying to place my cut outline on my image. I have turned the image from a jpeg to a bitmap but am still having trouble placing the cut line on it.
View 6 Replies View RelatedCorelDRAW Graphics Suite X4 :: Put Outline Around Number With Space?
Aug 26, 2011number 3.jpg
How would I put an outline around a number with a space between the number and outline?
CorelDRAW Graphics Suite X5 :: Outline Sizing With Image
Aug 30, 2011When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
CorelDRAW Graphics Suite X5 :: Select Inside Outline Box?
Jan 15, 2012Although I select inside an outline box, the outline box always seems to select. how to disable this?
View 3 Replies View RelatedPhotoshop :: How To Create "Holy Grail" Type Of Outer Glow
Jul 25, 2004What I mean by "Holy Grail" is that intense outer glow of crosses in religious illustrations but that looks natural in photographs. I am looking for technique, filter or third party plug in.
I have product photos to create this type of outer glow but I also want it to look natural.
I am looking for a fast, easy and adjustable way to do this -- if at all possible.
CorelDRAW Graphics Suite X5 :: Printer Output Does Not Follow Outline Pen Changes
May 28, 2011I have noticed that when i make changes to line widths in a drawing using the outline pen, the printed output does not change until i make at least a change of .005". changing it by less than this only changes it on the display.
View 2 Replies View RelatedCorelDRAW Graphics Suite X4 :: Remove Part Of Outline With Fill
Apr 20, 2012I have a question regard removing the outline from a portion of an object or making that portion invisible and still fill the object in its original shape Say for instance I have a circle or a rectangle and I converted them to a curve. I want to be able to make part of the outline invisible and still fill it in its original shape.
View 7 Replies View RelatedCorelDRAW Graphics Suite X6 :: Object Fill - Outline Areas
Oct 14, 2013I am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Assign A Dotted Line / Outline
Apr 28, 2011I would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Laser Engraving - Did Not Vector Cut Red Outline
Jan 18, 2012Use CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
View 10 Replies View RelatedCorelDRAW Graphics Suite X5 :: Editable Outline World Maps?
Mar 15, 2012found any outline world maps truly editable in Draw? I have imported some from other formats but none worked all that well.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Adjusting Size Of Outline Contour
May 14, 2011URL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedCorelDRAW Graphics Suite 12 :: How To Make Outline Inside And Outside Of Style
Dec 23, 2013How To i Make Black Outline Inside And Outside Of Thease Styles With Corel Draw ?
And Then I Want To Remove Gray Color Only Need Black Outlines
CorelDRAW Graphics Suite X3 :: Outline And Fill Properties On Task Bar
Jul 7, 2011I am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint brush told me the fill colour and a pen told me the outline properties.
How do I get them back?
CorelDRAW Graphics Suite X5 :: How To Color Outline Of Closed Object In Different Colors
Aug 16, 2011How do you color the outline of a closed object in different colors in Draw . I have a green triangle which is part of a witches hat....... I have colored the outline in the same green as the fill but I would like to keep the bottom line (curved) black to define it against the hat brim. Is there a way to keep this line black when I make the others green......otherwise I have to draw it in again.
View 5 Replies View Related
