I want create a big document with Illustrator CS6 (approximatly 12000 mm x 1600 mm) but the maximum in Illustrator is 5779 x 5779 mm.
How can I do it ?
Where can I changes datas to do it ?
In InDesign it is possible to create links within a 'document', i.e. non-web hyperlinks.
Is it possible do to this in Illustrator?
I'm putting together some design specs and I want to create a clickable table of contents that will navigate to a different section of the document. IE. artboard #27
From what I've seen thus far it looks like I can add links but only to websites and they are only clickable in PDF mode.
Is it possible at the very least to make my clickable TOC when converting my document to a PDF? and, is it possible to make it clickable even if it is in .ai format?
Downloaded an image from iStockPhoto. Opened up in Illustrator and removed the black background because I want to set my own values for the black background in InDesign.
Noticed that there are several "bubbles" of black background behind the main image that contain radial gradients.
These "bubbles" fade from a dark blue in the center out to black on the edge. Again, I want to be able to set this "black" to the value of black that I want to use for the background of the card. When I click on one of the bubbles, I see in my Gradient palette that it's a radial gradient and the value on the left of the slider is 100, 75, 0, 50 which I can see in the Color palette. But I can't change anything there. On the right of the slider in the Gradient palette is the "black" which is 80, 50, 0, 100.
So, how do I modify the value of that black? If I choose "new swatch" in the swatches palette, it just creates a new swatch called "New Gradient Swatch 1" It shows Process Color for the color type below which is greyed out as well as everything below that. how do I go about changing the black on that gradient?
I just recently re-installed CS4 onto another computer and now I can't select "Custom" in the size when creating a new document.
View 1 Replies View RelatedI recently u[graded from a very old Illustrator version to CS6 and I noticed the crop tool is missing. It used to be really easy in the old version to drag the crop tool around the area in question and crop marks would be generated automatically. Then I could save and print just that area only. Now this tool is gone and I am having trouble with finding a way to define the area I want to save or print. When i generate crop marks and then save, all i get is a file with plenty of white around it that also shows the crop marks....
View 2 Replies View RelatedHow do i create a new document with multiple artboards of a certain template?
View 1 Replies View RelatedI need to print a document with partial UV-spots, and cannot figure out how to make my Illustrator document ready for print!
The online print center guides me to: create a 'seperate print channel' for the specific elements in my document i want covered, with either a '5th color or a special color' set for 'over-print and 100% color'.
I can't figure out the proper commands to fill out and complete the script below. What I am trying to do is:
- Create a new document using one of the Profile presets (or have the New Document dialogue open so I could select the profile, size and bleed)
- Make 3 layers, each with a diferent name
- Create a rectangle the size of the artboard on the bottom layer, with a swatch stroke and no fill
- Create a rectangle the size of the bleed on the middle layer, with no stroke or fill
Like I said, I haven't gotten far at all. I've read through the basic scripting guides and I'm just not understanding all of the language needed to string things together.
tell application "Adobe Illustrator"
make new document
set topLayer to make new layer ¬
at beginning of document 1 with properties {name:"Vector"}
set bottomLayer to make new layer ¬
at end of document 1 with properties {name:"Through Cut"}
end tell
All of the sudden I can't create a customer profile when creating a new document. Earlier I selecting the print profile. I tried opening a new document and creating a custom profile but that option is grayed out.
I created custom brushes yesterday but they don't appear today. Is that because of the profile that the brushes were created with and without that profile I won't see the brushes?
Is there a way to create an object/group in Illustrator and then copy it across one document in multiple places (multiple art boards, etc.) - allowing the designer to then update the original and seeing the changes cascade to all copies?
I know this can be done using InDesign by linking an Illustrator file and making subsequent updates to that Illustrator file. But I do not want to use InDesign, I want to use Illustrator. What I want is much like creating Symbols in Flash, updating one will cascade throughout the file.
I have an image that is a cellphone picture of a magazine picture. It is 1952 X 3264 pixels tall and skinny. It is mostly blackish but has a red line drawing in it.
I would like to make a layer(?) that is 4352 X 3264 (4x3 ratio) that is all black then put the original image on it (as a different layer?). After that I would like to put a very light smoky-haze over it all. Lastly resize it to 1200 X 1600 and reduce the file size to a reasonable size.
I need to rotate a snipped of text approximately 23% forward from horizontal.
I'm using 2.6.11. this is what I'm doing:
Open a new file. Select the text tool and type in text (I've tried this both on a new layer and on the background layer). Click on the rotate tool and click on the text.
Inevitably, the gunsight appears in the center of the whole page, though the textbox is selected, and when I rotate it the text stays stationary and the rest of the page rotates.
In the full version of Photoshop I can crop an image 1600 x 1200 pixels, then save for web. It’s a simple two step operation that seems impossible in Elements. First because you can’t crop by pixels, only by proportion. Then because the save-to-web feature seems to result in a massive gif file, not a small jpg.
View 2 Replies View Relatedwe would like to request a quote for the vectorization of images in approximately 2600 pages.
View 2 Replies View RelatedI am a casual photoshop user. I need to design a tagged pdf documents which is accessible to use with Dynamic PDF. When I searched online, lot of people are using Indesign but I have never used it. So, is it possible to create tagged pdf document from PS or I need to learn Indesign?
View 1 Replies View Relatedi have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
View 4 Replies View RelatedI have had this program for several years and no problems until yesterday. My computer, win7, 64 bit, did an automatic update. Now my corel draw will not run and the following error report appears.
"Unable to create a DOM document.Class not registered / Verify that MSXML4 is installed"
Can not reinstall program as the box is sitting on a shelf 800 miles away.
At the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedHow would I import a Microsoft Word Document into Lightroom Module inorder to create a slideshow with the document?
View 1 Replies View RelatedCurrently I have 30 .xar files that I have to export one by one to PDF, then I have to use a terrible PDF stitcher that cost me $30. Is there a way in either version 6 or 7 that enables you to create a single .xar document but actually have multiple pages within it?
View 5 Replies View RelatedI have opened a document with several xref and i want to add new entityes into those xref. How can i do?
We launch _refedit/_refclose commands in AutoCad Command line for this. I want to do the same in Autocad.NET
if there is any way to create a new 'FeatureBasedPattern' within an assembly document. I have 2 assembly occurences - parts. In the Part1 i created a RectangularPattern of workpoints. The Part2 is going to be used in the new pattern. I tried the following VBA code, but it doesn't work.
Dim oPart1 As ComponentOccurrence
Set oPart1 = oAssDef.Occurences.Item(1)
Dim oPart2 As ComponentOccurrence
Set oPart2 = oAssDef.Occurences.Item(2)
Dim oTG As TransientObjects
Set oTG = ThisApplication.TransientObjects
[code]...
The Call function breaks with: "Invalide procedure call or argument". I also tried "Set oAssemblyPattern = oAssDef.OccurencePatterns.etc...." instead of Call function, but with the same result. Same error for declaration change of "oAssemblyPattern" to "FeatureBasedOccurrencePatternProxy".
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies View RelatedMy part unit length has been setup as millimeter(mm).Once I created a line within 2d sketch by VBA script, the result of length always become to 10 times of value.For example, the two points of line is (0,0) and (0,4). But the result of length measured is 40.
My problem is how to create a line with part document setting?
In an assembly document, I try to add a MateConstraint between male and female side of an 45 degrees elbow. The male side is built on the XZ Plane and Y Axis And I try to create a workplane on the female face.
But a got an error with the last line of code. Here's my code (vb.net code) :
' Get application object
Dim app As Inventor.Application = GetObject(, "Inventor.Application")
Dim doc As Inventor.AssemblyDocument = app.ActiveDocument
[Code] .......
I am trying to create a new base view in drawing-document.
I can get hold of the view but cant find a way to set reference data --- would like to set the "Line Style" to "As Parts" and "Hidden Line Calculation" to "All Bodies".
I take a picture of a document (text printed on a white piece of paper), which I then load in gimp. There, I can rotate, rescale and cut out the document. What I want to do in addition is to whiten the background, so it looks like if I had used a copy-machine to scan the document.
View 1 Replies View RelatedCan I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?
View 2 Replies View RelatedI've been using X3 for about 5 years.Today, I can't open the program.... a message appears
"Unable to create a DOM document.Class not registered Verify that MSXML4 is installed."
I have no idea what this message means. I uninstalled the program and reinstalled, rebooted and still the same message comes up. I use this program almost everyday, so, of course, now I'm unable to produce art for clients.
My PC is Dell Studio XPS 8100, 64 bit and Windows 7.