I've placed a 1 bit photoshop eps file into Illustrator and I'm trying to colour it. I tried selecting it and applying one of the colour swatches but nothing happens.
View 13 RepliesThis problem happened only after I updated my Illistrator CS6. I'm on Windows 7.
View 2 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
Have usually files where parenthesis, brackets, single and double quotation marks sometimes are not matching, as
Houses originally (red, are now different (yellow),
The same with quotations marks that open but are not closing
It is possible write a grep to apply a colour or identify these events?
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View Relatedcopy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View Related"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
Creating a new image I get the above message. I've uninstalled and re-installed and still get the problem.
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
When I place a bitmap in illustrator from Photoshop the colour breakdown changes. In photoshop, it could be set up using a 100% Solid black using CMY 0% and K100% but when I place this in illustrator the breakdown changes to say C:78.89%, M:80.45%, Y:88.90% K:90.45%.
View 11 Replies View RelatedWhen I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
View 10 Replies View RelatedWhy are none of the effects I apply working? Every effect I've tried causes the program to "Not Respond", and then shows the program applying the "Gaussian Blur" when I have not applied it. The program applied "Gaussian Blur" also does not take effect, even though it shows the program applying it.
View 3 Replies View RelatedNot able to apply gradient along or across stroke of an outline of a shape or a line drawn with the pen tool using Illustrator CC.
View 3 Replies View RelatedIm having problem with scale in an action im making, it just wont apply
I cant work it out, here is my code
For this demo i have set to 50x50% scale to
/version 3
/name [ 10
43617365204d616b6572
]
[Code]....
I want my type to resemble a building, how do I figure this out?Also i have a thumbnail box which I'm putting my box in, how do I cut off the type from the outside of the box.
View 11 Replies View RelatedIt seems that all these gradients-in-stroke options are only available for strokes that are aligned to the center of the path. I have tried to set inside and outside strokes, but i cannot for the life of me activate the right two options (even though they look like i can click on them).
Gradient-in-stroke options:
Using IL CS6. I have a photo that I did an image trace on. Now I want to make it an illustration. I would like to select multiply paths and apply a color change to all of them at once. I would like to be able to select the paths to change by their current color, and then apply the change all in one shot if possible.
View 11 Replies View RelatedThere is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
I'm working on a logo and I need to merge three objects into one and then apply a gradient. I have a circle, a ring around it and a line that connects the circle and the ring. How do I merge these three objects? I've been looking around the intenet but not found out how to do it..
View 4 Replies View RelatedUpdated Illustrator to CC and now my apply gradient to stroke is acting funny (also does it with apply along stroke). First i can't get it to show up unless I find a number it likes (start out with 1 pt, don't see a stoke so increase size 1 pt at a time up to 11 to see it) now the corners have gotten strange, They seem to be missing small patches. You can see in the image I am not doing anything fancy, it's type and then just to make sure it wasn't a font problem I tried just a rectangle. It seems to be worst with corner set to round joint.
View 16 Replies View RelatedI am trying to apply 3D Revolve effect using PlayActionEvent. Since effects are not recordable, I added it using "Insert Menu Item..." and saved .aia file, which contained 3 params (itnm, lcnm and cmid). These params were enough to invoke 3D Revolve Options Dialog using SDK, but nothing more. Two questions:
Is it possible to suppress Options dialog? I used kDialogOff, but without effect. I suppose that dialog showed because I haven't specified any additional parameter (like x, y, z rotation, angle, surface, etc), which leads to second questionHow to find out list of params that are necessary for particular effect?
Generally, is it possible at all to apply Effects using PlayActionEvent?
I selected the line and wanted to apply gradient across the stroke, but why it is greyed out?
View 2 Replies View RelatedI designed in photoshop with pen tool a shape of pattern which would be printed. Exported to Tiff. But what I need to add is a pattern to add 3d feeling. Actually it will be printed to fabric and I need to add 3d feelings like example here:
I need to recognize two parts- a leaves and rest of the "plant" how to do it?
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
Here's my issue... lets say I have 600 different objects in illustrator (just little circles with a fill color, no stroke) and 6 different colors that these circles should be. That means, I'd like about a 100 to be one color, 100 another color, etc... Is there anyway to select all 600 and just tell Illustrator that I have these 6 colors and I want to apply them to the selected objects randomly?
View 19 Replies View RelatedI am trying to draw a sun-like shape. I started with a star polygon and apply the Twist effect. That gets me pretty good arms on the sun, but I'd like for something a bit more flame-like, so I'd like to get the arms to now bend back in the opposite direction. Is there any way to use or modify the Twist effect so that I can apply it a second time but bend further out in the opposite direction? Or is there some other good way to get the rotation along all the arms.
View 6 Replies View RelatedI was wondering if it's possible to do what Effect > Distort & Transform > Transform does from JS. I had a look at the documentation and found nothing in that direction.
The closest thing I found was PageItem.applyEffect(effectXML) looking at the Object Model Viewer in Extend Script Toolkit, but couldn't find documentation for it and I suspect it might have something to do with SVG filters perhaps ?
In conclusion: Is it possible to apply a Transform effect from JS (and if so, how )?How can applyEffect be used ?