Illustrator :: Characterization Of Superscript And Subscript?
Dec 26, 2012How to set the characterization of the superscript and subscript "position, size, .... I would prefer to make it like M.S" in illustrator CS6?
View 6 RepliesHow to set the characterization of the superscript and subscript "position, size, .... I would prefer to make it like M.S" in illustrator CS6?
View 6 RepliesI use Adobe Illustrator CS4 in a MAC. I want to establish a chemical formula MO3- with Illustrator. It seems that I can only first type NO3, and then set 3 as subscript, afterwards I input -, and set it as superscript. But in this case 3 and – are not consistent in the horizontal position.
So I am wondering how to set up subscript and superscript to the same word at the same time?
how to write subscript and superscript in autocad?
View 3 Replies View RelatedIllustrator applies the subscript effect only to numerical characters, e.g. 1,2,etc. But it does NOT apply it to alphabetical characters, e.g. a, b, c etc. I observe this using the default Myriad Pro font, as well as other fonts.
How do I apply subscript to regular letters (not just numbers)?
p.s. I am using the Ctrl+T menu, then go to OpenType tab and select Subscript under Position setting, and observe the issue above. Am I doing something wrong here?
I find myself typing quite a bit of text that has the ® and ™. Many times the font, when it has that typed, is too big, so I have to use the type panel with the flyout menu to then change the character to superscript. In InDesign there is a keyboard shortcut for this. Is there ANY way to do the same thing in Illustrator?
View 3 Replies View RelatedI've been trying to feel out the pipeline for creating HIK rigs and jumping back and forth between Maya and Motion Builder. In Mobu, there is a way to add prop joints to a character's definition, but I haven't found a way to do so in Maya.
What I have done, is created the joints as necessary, and then created custom controls that the prop joints are constrained to. It's a simple parent constraint, so nothing too tricky. However, when I go to File-> Send to Motion Builder, the joints that are constrained are offset from their proper positions by a distance similar to their offset from the origin of the scene. The only way to get them back, is to turn off the effects of the parent constraints.
The controllers, and constraints transferred into Mobu fine, it seems. So I'm not sure where the discrepancy is. It would be ideal to be able to add these joints into the characterization step in Maya, to simply move them about with FK controls. What the best way to set this up would be? Is there a way to add prop definitions to a character in Maya?
While the original question remains, I found that the prop controls I had in my scene, were off from their proper positions, by the exact relative amount from the origin in the maya scene. Even though I froze transformations on the controls, coming into Mobu, they were put back on somehow. After selecting them, and setting their trans values to 0,0,0, they were put back into the correct position.
(i) Subscript selected text
(ii) increase font size 33%
(iii) Same for Superscript
how I could replace all the "#" in a photoshop layer with the number sign superscripted? I have about 15 to 19 player names on a layer like this #99 Wayne Gretzky #11 Mark Messier etc.
The # looks funny and is bulky. I know how to change one at a time but am looking for a global solution.
Im having a hell of a time with PS. If I superscript something (I do alot of retail price points) and then make a new type layer, it automatically defaults to superscript instead of defaulting to the normal font. This happens every, single, day. I finally got fed up and I bef of you a solution if you could. OS and Version below.
Photoshop is current on 12.0.4 x32
Mac OS X 10.6.8
I am formatting a Bible for a client. The text was provided with verse numbers before each verse, but each chapter is one long paragraph. Now the client has decided they want each verse to begin a new paragraph. How can I globally insert an End of Paragraph mark before each superscrpt verse number?
View 8 Replies View RelatedI'm getting a weird underline placement on SuperScript text. It should be right up under the "99". Can't change it, even if I use the Node Edit tool.
View 12 Replies View RelatedCurrently using Throttlestop to overclock i7-2600 to its turbo state and setting the priority of Illustrator to realtime and the affinity to the first 4 cores. Also, the system has 16gb of RAM installed and is set up as Raid 0 on 2 250gb 7200 rpm hdd's. Even during the most stressful tasks the cpu usage never goes past 13-14%, which is half of one core. The system is completely idle except for 1% in use by various system tasks. Is there a reason as to why Illustrator is throttling itself?
View 3 Replies View RelatedI currently need to convert some of my tshirt designs to ai or esp format so they can be printed. I have discovered the trace tool as to fix the problem you get with the lines when you import a psd file to illustrator. What I am still struggling with is keeping transparency of the background.
I did manage to create a ai file from png with a transparent background, but now I cannot seem to replicate it. Also I find it difficult to see IF the BG is transparent since its always white (instead of the grey blocks). atm I check by adding a layer in illustrator and paint something to look if it shows under the original layer.. seems a bit silly.
I've read that importing the png files should solve the problem, but I can only manage to keep transparency when saving as a png, which is not what I need. btw (may be the reason of my failure) I import the psd file and select flatten, since the psd files often contain many layers and I couldnt get the trace tool to work.
So I have a few questions which you might be able to answer; I sort of know the difference between ai and eps, but I dont see any reason to save as eps, is this correct thinking (taking into account I can deliver them in both formats)?What would be the easiest way to convert psd or png files all with transparent BGs to ai? Is using the trace tool efficient and a good choice to fix the problems with the picture caused by importing psd to ai? should I 'always' use the "place" function to import?
What is meant with "text to curves" and "line thickness to paths"?
I have an unopened, sealed CS2 but the box says that it runs on OSX 10.2-10.4. I don't want to open it if it won't run on my OSX 10.8.2. Is there an upgrade that will permit me to use the application?
View 2 Replies View RelatedI have a logo in Photoshop format, is it possible to convert it to the formay Adobe illustrator uses I've never used illustator.
View 4 Replies View RelatedI am trying to design my first Brochure, I read here that the better way to do this is in Illustrator.
I have CSversion of both.
I have a logo in PS and am trying to drag n drop into Ill..
The logo has a transparent bg , but when I drag n drop, the bg becomes white in Ill..
I am using one of the templates in Ill..
Havent been around that much lately.
Anyway, ive been working on this logo for a client.
After several revisions, we called it complete.
Now.. the thing is, i made the logo in photoshop but he prefers the logo in Illustrator format. Whats the best way to save the file so i can open it up and probably edit it in Illustrator?
Does anyone have Adobe Illustrator? If yes, what do you think about it... I am thinking of getting it to play around with the graphics etc.
if I bought the download of Photoshop Elements CS2 from the adobe online store, I suppose I still have to buy a full version of Illustrator right, and not just the upgrade since they are different programs?
Using the Roland GX-24 plotter to cut vinyl and the Illustrator print to plotter plug-in, the program refused to cut rectangles. (with the exception of lower case i's) This includes Capital I's, lower case l's, hyphens and rectangles using the rectangle tool.
All other letters have no issue cutting. So long as they're not a single rectangle. This anomaly was experienced using several files, tested on old and new. So its not an issue with the file.
Illustrator has been performing fine since install (01/22/14). Performed Adobe update and now it will not open at all. I've tried uninstalling and reinstalling the extension manager. I have no plug-ins installed.
View 4 Replies View RelatedI'm designing a user interface for iPad (Resolution: 1024x768, DPI:132). Setting the resolution is a piece of cake but when I change the ruler unit to Centimeters, it shows the screen about 36x27cm which is not right (iPad screen is 24.3x19cm).
Illustrator calculates these lengths based on the DPI. But when creating a new document the only available DPI's are: 72, 150, 300 (File > New > Raster Effect). I know that Illustrator is a vector design program but there must be a way to set the DPI to an arbitrary value.
How can I have a 1024x768px artboard in Illustrator that is 24.3x19cm? (DPI=132)
I recently designed a logo for a client that included both a gradient and transparency. I flattened the transparency, expanded the strokes and embedded the text before saving a copy of it in .eps and another in .pdf (PDF/x-1a:2003)
When I opened both files in Preview, I found these two problems:
I didn't have this problem when I saved the file in other formats (.jpg, .png) Also, while I'm here, is PDF/x-1a:2003 preset optimized specifically for printing?
[URL] and I don't know how to get the stroke around the blue circle, to be on the outside rather than in the middle? It should say "Stroke---(square with blue)---7 pt---Outside" in Apperance, but mine doesn't say Outside.
View 16 Replies View RelatedHow do I export my file as a PDF and make it so it's not editable in Illustrator again?
View 1 Replies View RelatedI have architectural detail drawings in pdf. In photoshop CS6 I can invert them but the quality drops, it becomes pixilated. I want the background to be black and lines/writings to be white. How can I achieve this in Illustrator CS6?
View 3 Replies View RelatedI want to make a graphic to be placed on a web page that can be automatically styled in different ways using CSS. The problem is that when I export an SVG from illustrator, the SVG code is stripped of IDs/classes and so the CSS script won't function.
Some background: I work in a group of artists who make graphics in adobe illustrator and we need the ability to take these graphics and restyle them for different contexts. The restyling needs to be done fast.
So far I have tried naming elements on each layer, and I am choosing the Style elements selection in the CSS properties drop down menu
There is a lot if support for using the new versions of illustrator to provide the CSS code to copy and paste into a CSS document but I have not had luck finding support for getting a CSS-ready file out of illustrator
Is there a workaround or plugin that will allow illustrator to export a 'semantic' SVG graphic that can be styled using CSS?
how do u use the pen tool?
View 4 Replies View RelatedI need to use Hex colours in illustrator, however, I can't find the option. Other info say's to go to the colour picker, but hex is not there.
Is it a colour set that I need to upload?
I create a file in .ai (small logo for document headers, mostly text), save type to outlines, save an .eps version and import into MS Office Word, save as a PDF and the image comes out with jagged edges. PNG comes out blurry and faded in PDF (it's fine in Word). So I need to make my image available for a Word header for a document that will be saved as a PDF.
View 5 Replies View RelatedAI 10 won't run on windows 8.
View 1 Replies View RelatedI created a psd with transparent background with smart graphics in 1 PMS color, I need ot place the psd in illustrator, how do I keep the PMS colors in the psd when I place the psd?
View 4 Replies View Related