I spent hours trying to annotate a circle 6 pixel in diameter. Using DrawEllipse passing a 6 pixel square rect. and it draws a square. If the diameter is large ex. 20 pixel then it draws a circle.
The circle should look like this:
According to the tool pallet instructions, I should be able to draw a circle of specific diameter by typing in the "width" dimension, then, according to Illustrator: "you can click on the word Height to copy that value into the Height box." Doesn't work. I've trashed the AI prefs, clicked on the word and on the field, and this simply doesn't work. I assume that I or my system is at fault.
View 2 Replies View RelatedHow can I draw a circle by entering a diameter measurement instead of the default radius?
View 5 Replies View RelatedIf I want to draw a 10% slope on 5' contours how do I calculate the circle diameter needed to construct the slope in order to connect the lines where the circles intersect the contour?
View 1 Replies View RelatedWhat is the smallest object I can draw and "SEE" in AutoCAD? I was hoping to prove a point in my introductiory AutoCAD class, but it appears I have been lying!! I tried to draw a cirlce with a diameter of 1.24E-10m. The dot shows up, but I cannot zoom to it. I tried using an enormous zoom scale, but did not have any luck. I am almost positive my instructor introduced the capabilites of AutoCAD by drawing a full scale helium atom, and that was release 14. Is this still possible? Obviously the atom can be drawn, but what are the zoom limitations?
View 5 Replies View RelatedAll my brushes are about 20% smaller than the diameter of the circle. What's happened?
View 2 Replies View RelatedI have a line and I want from the midpoint of this line to draw a circle with 50meters diameter.
My problem is that my drawing has WGS84 as a defined coordinate system so everything is in decimal degress.
How do I draw the cirle or any other item for that matter using metric units (meters etc) while on WGS84?
Can a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables?
View 1 Replies View RelatedCan a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables? The appilcation is taking the diameter of a tree trunk (the attribute), multipling by 12, and drawing the canopy circle on hundreds of those blocks. So the circles drawn will vary in size.
Not sure how this could be set up, i'm not familiar with LISP writing at all.
1) Read block, single, mulitple or definition?
2) Read Attribute
3) Varaible of attribute, (attribute is an inch measurement...it needs to be multipled by 12 to get feet for final use as circle diameter drawn)
4) Draw circle, variable, with diameter coming from attribute variable (attribute in inches that is multipled by 12)
5) Center point or circle to be block's base point
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies View Relatedis there a way to skew a circle for isometric pixelart. mspaint can do this and its quite useful. was wondering if .net can do it too?
View 16 Replies View RelatedIn gimp, some things are confusing. like the shear/skew tool, isometrics/pixel grids, and selecting objects.
Is there a way to skew a circle for isometric pixel art (30 degrees)? Does gimp have a isometric/pixel grid? (there's a regular grid, but its not isometric)
when selecting an object, is there a way to select it without using float every time? Lastly, is there a way to constrain a line to the 3 most used isometric lines used in isometric pixel art? (shift works, but its hit or miss)
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedI have a website logo (it is circular) that needs to be enlarged to 14" diameter to fit on the side of a truck - how do I go about this?
View 1 Replies View RelatedI am creating a family which uses an elliptical extrusion. However, I cannot bind the dimension of the ellipse to the parameters. How can I annotate the dimension of the ellipse?
View 3 Replies View RelatedI'm editing many folders for a book project and want to 'mark' a folder when I've edited the images in it. save time and know my progress on this task without writing down the names of folders and keeping a list.
View 8 Replies View RelatedI am looking for some general feedback on where the majority of people annotate there drawings. I was in a CAD meeting discussing our new CAD standards that we will be rolling out on Jan 1, 2014. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like toad annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
Where the majority of people annotate their drawings. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like to add annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
I managed to input the values of "Point Number", "Easting", "Northing", "Point Elevation" for 8 points of my CDC project that has 4 Sampling Locations with 2 Depths in each location - see the attched file for details. I also manually added the SampleID to the "Name" of each point. Now I want to do the following 2 things via the "Annotate" menu:
1) Add Labels: Instead of Point Number, I want to use the SampleID to label each point. How can I do it?
2) Add Tables: I have some chemical results/data (in Excel .csv file) for each point. I want to attach these chemical results/data to each point. Should I create an external Database? How can I designate that external Database is for the 8 points of my CDC8pts.dwg? How can use the external Database to label the chemical results/data to each point?
I have read some tutorials:
(i) I rotated my CDC8pts.dwg several times - the current view is from the Bottom of Z-axis and the Point Numbers are in the reversed mode!! How can I set the Point Numbers in the normal mode? If the Point Numbers are replaced by the SampleID, how can I set the SampleID in the normal mode too?
(ii) I saw the "Point Groups"/All Points thing on my CDC8pts.dwg, they appeared in this dwg, after I did the inputting for the "Point Number", "Easting", "Northing", "Point Elevation". Should I do something on the "Point Group" before I do 1) and 2)?
How can I add the multileader panel onto my annotate tab on my ribbon?
View 4 Replies View RelatedHow to (annotate / match orientation) for multiple blocks in the one go ?
I have to alter blocks with alomst every survey dwg I receive whilst at work. Just wondering if there is a quick way to do all blocks in the one go !
I want a to create a tool button on the annotate tab of the ribbon. The button will toggle between having the 'display line weights' box (on the drawing tab of the application options dialog box) ticked or not ticked.
I have the settings set to display true line weights. (so i can visualize how the actual print will look, but need it off to be able to draft properly).
I am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)
I would like for them to appear like this:
x = ........
y = .......
The coordinates would have to show to 3 decimal places.
Also when i have clicked a point is there anyway to get the coords into a excel sheet?
Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?
View 1 Replies View RelatedWhen I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies View RelatedI managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies View Related We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
I seem to have lost my Add Labels Menu Button on my Annotate Ribbon. I have tried reloading my workspace but it is still gone. How to add it back on?
View 2 Replies View RelatedI'm wondering if there is a way to annotate from the origin without having a long diminsion line to the center. (see image) I want it like the 'linear diameter' but not with double my size. I always have to annotate the projection from center and this would be easy much more easy to do.
View 1 Replies View RelatedI am using Adobe Illustrator CC version 17.0.1 x64 on Windows 8.1.
In Edit > Preferences > Guides & Grid I have the Show Pixel Grid option checked but when zoomed in over 600% the pixel grid does not appear. Am I missing something?
Align To Pixel Grid a bit more thoroughly. I understand how to use it - to turn it on & off, but I'm a bit confused about the "why & when" of using it. F.I. I'm creating a picturebook with text. So when I export / or save for web, I'll be turning the vector art and text as an image. My understanding is that using ATPG will eliminate the jagginess of the text that would occur, when it becomes an image, if I did not use ATPG.And conversely, if I don't use ATPG, the text will be jaggy when exported to jpg or png. Is this correct?
View 2 Replies View Related