I want to get the path of my placed plugin location in my custom plug-in code. supporse my custom plugin at :
C:Program FilesAdobeAdobe Illustrator CS5.1Plug-insMyCustomPluginMyCustomPlugin.aip
Is any API is there that can tell me my plugin path or the Directory path.
I'm trying to blend 2 complex shapes together to give a 3D appearance but I keep having issues with the edges that choose to blend together. The image below shows what I want it to look like (small square on the left, smooth color blend) and what the shape looks like (shape on the right). The paths have the same number of anchor points and the white shape on top is an expanded offset version of the green shape on the bottom. The purple lines show what anchor points should be blending together.
For some reason it is blending to a location somewhere in the middle of the path and not to the corners. I have gone over the two paths and made sure that there are no points that shouldn't be there, as i know that can cause issues with blending.
Is it possible to use LR5's Preset and Plugin folders in a location other than in the default ones? I'd like my live Prest and Plugin folders to be in a Dropbox folder so that they would be synced in the cloud but the folders would also be synced between my desktop and my laptop so that I would have a consistent work environment wether I was using my laptop when travelling or my desktop.
View 1 Replies View RelatedI tried to install the "RMA Path Blend" plugin into my plugin folder, however it is not appearing in GIMP under Filters>Render>Path Blend.
View 2 Replies View RelatedI have a standard install of Inventor 2012 SP2, but for some reason it cant seem to find the images for IBL effects. See attached Screen shot, when I go to select an item there is nothing there.
I have found the files in the "c:userspublicautodeskenviroments" folder but why Inventor cant see them?I have looked in "App options" in the "file" tab and in the project file and I cant see any pathing options that relate to the enviroments?
The default images for textures and bumpmaps are all found OK just not the IBL files? How I can set the path to these enviroment images?
I am using vb.net and I need to find the directory path that my current or open drawing is located in. I'm not sure how to get this from vb.net.
View 4 Replies View RelatedMy co-worker is having an issue with re-pathing the autosave location.
When it is re-pathed there is an error that says:
'The directory specified for automatic saves must exist and have read-write permission. The value previously saved for the automatic save files will be used.'
The file that it is linked to was just created, and the user has full administrative rights.
In turn this effectively makes the autosave not work.
Looking for a reference that shows what the default file path locations are for various AutoCAD user files. Specifically, I had my AutoCAD file paths changed and cannot find where my blocks are saved. I'd like to save the blocks I create in a specific folder.
View 9 Replies View RelatedI'm trying to specify the image source for ribbon images using relative syntax but having no luck.
If I use this:
button.LargeImage = new BitmapImage(new Uri(@"c:\folderA\folderB\image.png") );
it works just fine. But it relies on absolute syntax, which is daft since it forces the code to be installed in a specific directory (or the images).
I've tried
button.LargeImage = new BitmapImage(new Uri(@"images\image.png", UriKind.Relative) );
and
button.LargeImage = new BitmapImage(new Uri(@"images/image.png", UriKind.Relative) );
and I've tried placing the images subdirectory with the png file relative to the assembly, to the project source folder and even relative to AutoCAD itself - and in none of the cases do I get an image. I'd like the images subfolder to be relative to the compiled assembly.
there's nothing in that dropdown menu for you to select your source image/layer in the Move Path plugin.I am using an XCF (Gimp) file, with many layers. I selected a particular layer, then I opened the Move Path plugin.
View 2 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedI've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedIs there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View RelatedOnce you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedAND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedI'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
When I do localization for illustrator plug-in on Windows, I found the method now I can use is generating one plug-in for each language. I only wan to create one plug-in which can link many language resources. If system language changes, the plug-in can auto load appropriate language resource.I can't find more information about localizaiton in illustrator SDK, what I found is IAILocale.h,but it seems that not enough...
View 5 Replies View RelatedI am under development of a plugin.The plugin used to get loaded upto the recent times.AI gives a message "Error loading plugins XXXX.aip" with no further details.Code is with no compilation error (of course )
View 10 Replies View RelatedIs there any plugin to make the pen tool from illustrator behave/work like the pen tool from Photoshop. Both pen tool behave differently , and i am not used to the way of the pen tool behave in illustrator.
View 5 Replies View RelatedI want to call a ".jsx" from my plugin.i have added a custom menu item in File menu and now i want to call a ".jsx" file on its click event.
View 2 Replies View RelatedOn Adobe Illustrator CS4, I'm trying to import a CD I burned of an illustration created in Illustrator. I go to Place under File, but get "location is not available" when I highlight the CD and then press "Place".
View 1 Replies View RelatedI have to retrieve the location of individual symbols for further hit testing. For this reason I have to get to location of symbols in the best case as an AIRealPoint.
But I don't see a way to get the location of a symbol through the AIArtPathSuite nor through the AISymbolSuite.
We can save the Ai Document as PDF through :
1. Save As -> PDF
2. File -> Scripts -> SaveDocsAsPDF
But I have a case where I need to save document through my plugin.Can we save the currently open document as a PDF file using the CS6 SDK ?
How we can use plugin tools in actions?
View 1 Replies View RelatedWhen working with multiple documents, and I switch from the "current" document to another, is there some way I have to notify my plugin that I have a different document, or does my plugin always ASSUME it is working on the "current" document. I ask this in conjunction with Dictionarys, as when I switch documents, I cannot access what I think is the dictionary for the current document. Is there some type of document-dictionary relationship I am missing ?
View 5 Replies View RelatedIs is possible to write a plugin as a suite and expose its api to other plugin?
View 4 Replies View RelatedI have a plugin that should work on both Illustrator CS5 and CS6. CS6 also supports 64-bit illustrator.Can i create a 64-bit configuration for the CS5 SDK and make the plug-in work on Illustrator CS6 64-bit?
View 1 Replies View Related