I have a plugin that should work on both Illustrator CS5 and CS6. CS6 also supports 64-bit illustrator.Can i create a 64-bit configuration for the CS5 SDK and make the plug-in work on Illustrator CS6 64-bit?
View 1 RepliesI created a simple "Hello World" plugin by following the instructions in Adobe's guide: Getting Started with Adobe Illustrator CC Development, which is available as a pdf here.
The plugin works in the 32-bit version of Illustrator CS6, but I get an error message while trying to launch the 64-bit version. "Error loading plugins. HelloWorld.aip" How can I fix this error?
I need a icon plugin for CS6 (64-bit) But I can't find one that doesn't link to [URL] and there are no mirrors to download it from another site.
View 1 Replies View RelatedI have a VBA plugin used in Autocad.This plugin works fine in windows xp and windows 2003 server(64bit) but it fails in Win7(64bit) machine. Error is that the pop up window which is MODAL and which should in front is coming in background in case of Win7(64 bit.).
View 1 Replies View RelatedI installed the Redfield fractalius pulgin in CS-6 works fine in 32 bit but causes the 64 bit to stall at the point where CS6 is looking at the plugins. I then uninstalle it and it still locks up at the same point while booting up the program a reinstall did not work. easy fix without a complete reinstall of CS-6 and all the plugins.
View 2 Replies View RelatedI recently upgraded my computer from windows 7 32 bits to win 7 64 bits. I am trying to use Photoshop cs6 64 bits, however I cannot open any files in camare raw (the plugin does not exist). also I cannot update Photoshop (last I tried from update submenu was Adobe CSX6 InfrastructureCS6). What I need to do to use camera raw in 64 bits and to update photoshop?
View 1 Replies View Relatedthough the Nik-Collection-Filters are listed (and installed) in PS CC 64, they do not work properly. The first visible difference is, that the "panel" of the various filters is not displayed when I start PS, but it is in the 32 bit version.Even if I want to apply an Nik-Filter on an image nothing changes, but it does in 32 bit mode.
View 8 Replies View RelatedI get:Works fine in 32 bit.
View 1 Replies View RelatedCorel Draw X5 does not work on Windows 8/64bit Consumer Preview.
View 12 Replies View RelatedWill my 32bit CS3 plug-ins (Neat Image, etc) work with CS4? Also, will CS3 actions and scripts work in CS4?
View 25 Replies View RelatedThe spacebar will not work as a move tool on my computer.I tried closing my browser. Got a fix but it is only for 32bit. Any fix for a 64bit system?
View 9 Replies View Relatedafter having installed Autocad 2006 LT on windows 7 64 bit, i cna't execute it because it gets the error "unhandled access violation reading 0x0000 - Exception at 621b40h".
Tried every option in Windows program execution compatibility option but no success. Obiouvsly user is administrator.
get this software running on windows 7 64 bit?
I use third party plug-ins from two different companies and they all worked during my PSCC trail period, but now PS won't recognize any of them. I've tried re-installing them using the custom install process, but they still don't work.
View 6 Replies View RelatedI have installed the new Reflow generate plugin and it is in the plugin folder, but i can´t find generate in the file menu.
View 23 Replies View RelatedThe camera RAW plug in does not work anymore since I bought a Canon Eos 700D.
View 5 Replies View RelatedI work with GIMP 2.8.4 on Windows XP. In order to remove strong lateral chromatic aberrations I tried the CA plugin version 3x What I saw in the preview looked good, but when I pressed the OK button no result appeared. What is the reason? How to install this plugin on Suse Linux step by step.
View 4 Replies View RelatedPlugin filter works only in 32 bit and when I open an image and click on the filter I get an error message - Memory Access Violation.
View 8 Replies View RelatedJust installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
I have an issue with saving files in my Illustrator CS6 (64bit), the saving process is too long, 5-10 minutes of wait and my laptop is getting iffy while saving. Sometimes Ai crashes in midst of my work or saving and I loose hours of work.
My laptop: CPU Intel i3, 8GB RAM, 1GB Nvidia Graphics, 480GB HDD, Windows 7 Premium 64bit.
I tried fixing the problem so far (unsuccesfully obviosly) by doing this:
1) Running all updates
2) Uninstalling excess fonts, I only have 180 fonts currently
3) I do not use FontExplorerProX or similar.
4) I turned off compression option during save.
5) I turned off making PDF copy option.
Same Ai on a much weaker PC in XP SP3 32bit has saving time of few seconds. This issue was nonexistant when I first installed Ai, but as time goes by its getting worse and worse, it seems.
can you confirm if the CS4 version of illustrator will work on a 64bit version of Windows 2012 TS?
View 1 Replies View RelatedI'm trying to get down the bottom of what's causing an extremely serious error in the 64-bit version of Adobe Illustrator CS6.
Adobe Illustrator can open CorelDRAW .CDR files, to a certain extent. The .CDR files need to be saved down to version 9 or 10 compatibility. One of my coworkers just ran into a really bad Illustrator CS6 crash caused when opening a .CDR file. This is a crash I had to endure on my own new system a couple months ago.
After Illustrator CS6 64-bit crashes it simply refuses to launch again. It crashes and closes. Rebooting doesn't work. Deleting the AI prefs file doesn't work. Worse yet, the crash basically hoses all of the CS6 64-bit apps that are installed. The 64-bit version of Photoshop CS6 crashes when opening a file.
The last time this happened my only recourse was to do a "factory reset" on my computer, basically wiping the hard drive and reinstalling Windows 8 Professional in a clean state and then going through the very long, slow process of downloading and installing the CS6 apps from the Creative Cloud.
Are there any possible alternatives that might fix this error besides wiping the hard drive and starting over? This bug is pretty badly timed. Gonna have to go through all the download/install process stuff again when the new CC apps are released.
When I do localization for illustrator plug-in on Windows, I found the method now I can use is generating one plug-in for each language. I only wan to create one plug-in which can link many language resources. If system language changes, the plug-in can auto load appropriate language resource.I can't find more information about localizaiton in illustrator SDK, what I found is IAILocale.h,but it seems that not enough...
View 5 Replies View RelatedI am under development of a plugin.The plugin used to get loaded upto the recent times.AI gives a message "Error loading plugins XXXX.aip" with no further details.Code is with no compilation error (of course )
View 10 Replies View RelatedIs there any plugin to make the pen tool from illustrator behave/work like the pen tool from Photoshop. Both pen tool behave differently , and i am not used to the way of the pen tool behave in illustrator.
View 5 Replies View RelatedI want to call a ".jsx" from my plugin.i have added a custom menu item in File menu and now i want to call a ".jsx" file on its click event.
View 2 Replies View RelatedWe can save the Ai Document as PDF through :
1. Save As -> PDF
2. File -> Scripts -> SaveDocsAsPDF
But I have a case where I need to save document through my plugin.Can we save the currently open document as a PDF file using the CS6 SDK ?
How we can use plugin tools in actions?
View 1 Replies View RelatedWhen working with multiple documents, and I switch from the "current" document to another, is there some way I have to notify my plugin that I have a different document, or does my plugin always ASSUME it is working on the "current" document. I ask this in conjunction with Dictionarys, as when I switch documents, I cannot access what I think is the dictionary for the current document. Is there some type of document-dictionary relationship I am missing ?
View 5 Replies View RelatedIs is possible to write a plugin as a suite and expose its api to other plugin?
View 4 Replies View Related