Illustrator :: Change Colour Of Pixels In Raster (PNG) Image?
May 29, 2013
I have just begun using Illustrator CS6. I have a very simple image (.png file) that I would like to annotate with some arrows and some text. This file is what I guess you would consider a raster image (no vector graphics) that has a very limited color range. It has less than ten basic colors plus a gradient fill (shades of gray) in a few places.
I want to use illustrator to annotate this image with some lines with arrows and some text, but first, there are a few stray lines that I would like to eliminate. For example, there is a black line that I would like to "erase" by replacing all the black pixels in this line with white pixels. I tried to do this by selecting the "Paint Brush" tool and then selecting white as both my fill and my stroke color. After doing this, I position the cursor over the pixels I want to change but the cursor appears as a circle with a line through it, and it doesn't do anything.
View 2 Replies
ADVERTISEMENT
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Sep 18, 2012
If I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies
View Related
Sep 6, 2013
how can I change the resolution on a flatten image the looks pixeld?
View 16 Replies
View Related
Jan 21, 2013
I have this idea to place a raster image from Photoshop into Illustrator, and to have an array of Illustrator shapes over this placed image, to clipping mask the raster image with the shapes, and then to move the shapes individually, each one retaining it's section of that raster image which it clipped.
I believe I'm getting the clipping part to happen, but when I move the shapes with the Direct Selection tool, the clipped contents doesn't move with it.
I think that all of my shapes, taken as a whole are clipping this raster image...am I barkin' up the wrong tree here?
View 4 Replies
View Related
Jun 2, 2012
I am trying to use a raster image pulled of the web, in AI. As a result, (particularly when zoomed out) the edges of the image look rough & nasty.
Is there any way to fix this or at least compensate for it by smoothing the edges out?
View 6 Replies
View Related
Jan 1, 2013
cs6 image trace of psd raster file to vector (preset black & white) comes out just GREAT. but i need all that cs6 output - all black must be white. all output white must be black.
View 2 Replies
View Related
Aug 27, 2013
I just got a fresh install of Illustrator CC and every time I place a raster image into my document, it appears dim or very light. When I go to export the image, the PNG file displays the image correctly.
View 6 Replies
View Related
Jan 5, 2012
We need to deploy Adobe Illustrator on the server and then call it through script so that it could convert raster image provided through script into FXG format file. The implementation is for commercial use. What is the process and possibility of getting license.
View 1 Replies
View Related
Jun 18, 2007
I need to put this color: 514a4a, in a image. But if I click Ctrl + U, it don't let me put the HTML color code: 514a4a.
View 2 Replies
View Related
Aug 13, 2009
You can see on the attached image that there is a green wave form between the words. When i imported the pic into photoshop for my website design project the pic was this way but as a newb i think have changed a setting somewhere and now the waveform is white like the writing. Even when i import the image again the waveform it is white in photoshop but not when i open it indipendately.
View 1 Replies
View Related
Jun 18, 2013
I was working in Illustrator CS6 I had made a a bunch of vectors for a background and grouped them. I applied a blur to the group and was still editing the vectors within the group since then. After I saved and closed my file at the end of the day and opened it the next day my vector group is now solid. It seems like it is just a raster image? I can't edit it at all. How can I get it back? If I can't change it back I am going to have to start again!
View 4 Replies
View Related
Oct 28, 2011
I am trying to change the colour of a selection of an image - in this case a mug. So obviously, I want the mug and the mug only to change colour (and not the area inside the handle).
The mug is white meaning I cannot adjust the hue/saturation.
View 8 Replies
View Related
Jul 9, 2012
I recently turned down a job (foolish I know) because I didnt have a clue how to go about doing it.
I was asked by a shoe company if I was able to photoshop a load of images of white wedding shoes and change each one into the 35 colours they offer.
Attached is the sample they sent me which I've cobbled together showing one of the colours they do (green) and one of the white shoes that would need changing.
Now while Im not a photoshop pro, I have the basic grasp of selecting objects using the quick selection tool etc.
The two burning questions for me would be:
1) once I've selected the area of the shoe that needs changing, how to change the colour. I know I could "paint" the shoe with a colour and set it to say 50% transparent so you can see see the shadow etc but how do you change it and keep all of the shading etc?
2) The reflection - this seems a near impossible task. How to select just the bits needed?!
View 9 Replies
View Related
Jun 28, 2012
I am desperately trying to change the Canvas Colour for an image in Gimp 2.8.
At the moment in displays in black and grey squares and when I save the image as a jpg it's black.
View 7 Replies
View Related
Jan 30, 2013
I have a jpeg image and would like to change the colour of 3 of the words on the image. The image is on a black background.
View 4 Replies
View Related
Nov 16, 2013
No matter how I set the interface preferences, when I make a new artboard, that artboard is white.
The brain-dead workaround to this is to put a rectangle the colour I want on a locked background layer and make it the same size as my artboard, but this turns "Shift+O, drag" into "Shift+O, drag, M, drag, set desired fill colour, deselect rectangle, restore previous fill colour and tool and selection."
It seems like there should be an interface option somewhere that lets me set the colour of new artboards, but the only guidance I can find on setting the artboard colour says to use "simulate coloured paper." Simulating coloured paper is not setting the colour of your artboard. It is simulating the way ink always lets some of the paper colour show through.
I do not want my artboard to show through. I simply want it to be a different colour. When I press Shift+O and drag out a new artboard, I want that artboard to be the same colour. If I decide I would like a different colour, I want to change a single setting somewhere and have the colours of all artboards in the document change at once.
I cannot find any setting for this in the interface. Am I missing something, or is it just not there?
View 6 Replies
View Related
Nov 12, 2013
I am trying to change the colour of a border, there was a video [URL] but it has been taken down.
View 4 Replies
View Related
May 28, 2013
I've downloaded an EPS from Shutterstock with a series of icons that look like buttons and would like to change the colour breakdown, but keep the shading/ button 'look'. When I try to select a different colour breakdown of blue it turns grey and solid.
View 7 Replies
View Related
Aug 24, 2012
How to change the colour of a specific object in an image.
View 3 Replies
View Related
Apr 21, 2012
I have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies
View Related
Sep 23, 2012
Illustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies
View Related
Aug 1, 2012
I have a simple illustrator document with some text on it. The text is green. I wish to add additional text to the document in the exact shade of green that the current text is in. Believe it or not, I can't figure out how to do this. I can select the text I want to to be green and select a colour from the swatches menu, but the shades of green available there are not the exact shade of green that I need. I tried selecting my newly written text, click the eye dropper tool, and then clicked on my old text (which is in the shade of green that I want) but this frustratingly changes the font of my newly written text to the same font as the original text, without changing it's colour.
View 16 Replies
View Related
Mar 7, 2013
One of my Illustrator CS6 documents was intially created some time ago without paying much attention to colour management issues. I am now trying to put that right and have assigned the document a profile of Adobe RGB (i998). However, each time I open it I am warned that 'The document has an embedded color profile that does not match the current RGB working space'. It also says that the embedded profile is sRGB, while my working space is Adobe RGB. I get this message three times and am assuming that it refers to embedded objects.
Do I have to reimport all items that may have a colour profile, having first ensured that they are tagged as AdobeRGB?
View 4 Replies
View Related
Nov 20, 2013
When I set C to 40% and MYK to 0% the program automatically change to other values in all four columns. Is it some kind of default settings? If so, how can I change it?
View 3 Replies
View Related
Oct 7, 2013
Im working on an object which has 4 anchor points, i would like to keep to black stroke for 2/3 segments of the object but i would like to change the colour between two anchor points (so 1/3 segments).
View 5 Replies
View Related
Aug 9, 2012
I am currently navigating the document model through all objects and manually adjusting the fill colour of desired objects.For example, for each layer, I iterate through the GroupItems, CompoundPathItems, PathItems, in the GroupItems I navigate the GroupItems, CompoundPathItems, PathItems, etc.
In order to change all the colours of the objects, it ends up taking over a minute to accomplish. But in the Illustrator UI, I can select a very complicated group item and change it's colour very fast. In the SDK, GroupItem does not have a fill colour parameter, so I have to iterate through all sub-items to change the colour.
View 1 Replies
View Related
Jun 9, 2011
How do I change colour and black & white bitmap image to sepia?
View 2 Replies
View Related
Apr 5, 2011
I am working on an extracted image that contains a logo and a transparent background. I cannot figure out how to change the background of the extracted image leaving the logo with the same colour. I will also like to learn how to change the colour of the logo.
View 3 Replies
View Related
Nov 8, 2012
I'd like to change the text colour to that of one I pick using the eye dropper tool.
This is what I do;
1. Select the text
2. Using the eye dropper tool i click on an object (lets say a square) filled object with a different colour. (no stroke) - Now I expect that the text will change to the squares colour but it does not.
The eye dropper will pick up and change its font/colour if i select other text but not other objects. I have opened the eye dropper preferences and EVERYTHING is ticked in both picks up and applies.
MAC CS6
View 4 Replies
View Related
Sep 13, 2013
So i have this piece and i need to be able to colour different sections of the stroke around the whole piece with different colours. Also, i need to be able to change the width uniformly on sections between anchor points. I DO NOT want to use live paint as it takes away the sections of stroke i have tapered off already, however, the effect you get when using the live paint selection tool is exactly what i need
Is there a way of doing this at all?? It seems that i should be able to do it but i'm not able to find the right button, option or combination of both.......
View 3 Replies
View Related
