GIMP :: Text Tool To Make Certain Word Bold Or Italic?
Jun 13, 2012I can't find an option in the text tool to make a certain word bold or italic or underlined or any other such effect.
View 2 Replies
ADVERTISEMENT
GIMP :: Making Text Bold / Italic / Underlined?
Nov 10, 2006I looked all over, yet I haven't found a way to make text Bold, Underlined or Italic in the Gimp!
View 19 Replies View RelatedGIMP :: Editing Text Will No Longer Apply Italic Nor Bold Effects
Oct 1, 2013When I am editing text, GIMP will no longer apply italic nor bold effects. (Underline works though.)
I just upgraded from 2.8(.2?) to 2.8.6, and now I have this problem. I also just upgraded from Win XP to WIn 7 and upgraded from 32-bit to 64-bit, so I don't know if that is a factor.
I have files I created with the last version of GIMP that I can open and see the text properly formatted, but if I adjust the text the formatting disappears and WILL NOT come back.
GIMP won't print anymore either. My printer is set up correctly and I can print from other programs, but when I print from GIMP, it LOOKS like it went through, but the printer fails to do anything. I wind up having to tell GIMP to print to the microsoft xps writer (which DOES work) and then open the xps file I just made and have windows print it.
AutoCad 2D :: Roman Text - Font That Allow Bold And Italic?
Jan 27, 2012I typicaly use romans for my text, however it doesnt allow you to bold or use italics.
Is there a way to change this, or is there a font that is very similar that will let you bold and italic?
Edge Animate CC :: How To Set To Bold A Single Word In The Text Box
Jul 12, 2013How can I set to bold a single word in the text box? When I try, it puts the whole text bold.
View 2 Replies View RelatedCorelDRAW X4 :: Paste Text From Word And Retain Bold And Italics?
Jul 26, 2009I got a word doc file but when I copy and paste the text into coreldraw I lose all the italics and bold. It's 4 pages with lots of bold and itallics and needs to be reflowed in draw but retain exact italics and bold. When I paste it into draw, I lose all the bold/italic formatting. Are there any workarounds to get the bold and italic text to copy and paste into draw?
View 17 Replies View RelatedInDesign :: Hotkeys For Bold And Italic?
Aug 9, 2009is there a hotkey for making selections bold or italic?
View 7 Replies View RelatedXara :: Can't Change To Bold Or Italic Versions Of A Font
Jun 22, 2011I can't change to bold or italic versions of a font. Even when it is included in the options for a font.
It will show the preview of the change, but when I select it, the display goes back to the vanilla version.
InDesign :: Find All Text Wrapped In Commas And Make Them Italic
Feb 17, 2014I know the Find/Change tool is quite powerful within Indesgn but I was wondering if there is a way for it to find all text wraped in “ ” and make them italic
I have two 10,000 word documents filled with quotes and I was thinking an automated process maybe more accurate than be skimming it and doing it manually.
Illustrator :: Make Text Bold Many Letters At A Time?
Feb 23, 2014I import sequences into illustrator composed of hundreds of text letters. How do I make text bold many letters at a time? I can do one letter at a time but I need to do 20-30 at a time.
View 2 Replies View RelatedGIMP :: How To Bold Text Added Into Graphic
Aug 10, 2011I just added text to a graphic. How do I bold it?
View 7 Replies View RelatedAutoCad :: Text Prints Out Bold When Its NOT Bold?
Jun 9, 2006im using CAD07 &06 when i print out a drawing with lots of text some of it come out bold and some normal yet they are all the same font/height/size etc in the dwg?
does it make a diff if its mtext or single line text?
GIMP :: Copy Editable Text From A Word File Into The Text Editor
Oct 28, 2013I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
AutoCAD 2010 :: Change Text Editor To Word Processor Like Word?
Mar 15, 2013How can you changed the text editor to a word processor like word?
View 1 Replies View RelatedIllustrator :: Perspective Grid Tool - Make A Shadow Of Word Flat On Bottom Grid?
Apr 25, 2013When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
GIMP :: Text Tool Changes Text Properties When Paste Over Old Text Content?
Nov 2, 2012i switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
Paint Shop Pro :: Make X3 Text Tool Remember Text?
Mar 22, 2012Way back when I originally bought PSP X3, I used it for a short while then went back to X2. Mostly because the X3 text tool would not remember text I had used. Now I've recovered from a hard-drive death and want to move forward and use my X3.
How can I make the X3 text tool remember text?
GIMP :: Bold Versions Of Some Fonts Fail (2011)
Feb 21, 2011At some point - I'm not clear when - something changed with my fonts(Linux - Slackware64 13.1). Now I cannot select, for example, the boldor italic version of DejaVu Sans. The appear as Regular.
- I tried to install the newest package for the dejavu fonts,
- ran mkfontscale
- ran mkfontdir
- Though probably unnecessary, ran fc-cache
First tried to 'reload fonts' (button in fonts dialog) in Gimp, thentried to restart gimp entirely. (and from a terminal to check for anymessages with --verbose).
CorelDRAW Graphics Suite 11 :: Why Curve Get Broken When Use Artistic Media Tool To Bold It
Sep 12, 2011I made an elipse and changed it to arc.
Than I used artistic media tool to bold it but the arc get broken.
The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.
AutoCad :: Standard Text Is Always Too Bold?
Dec 21, 2011the text always appears bold both on screen and printed in my student work. My tutor has now commented as it detracts from the thickness of picture lines. So i need to figure out how to change this. I have never selected bold.
In the 2D diagram I am working on at the moment i am using single line text, dimension text and text within a table key on the side. It is all the same in terms of boldness. I have seen other students work with less bold text and i need mine to be like this.
I have selcted standard style, size 6.000 and it is not annotative. Is text affected by lineweight or layers?
GIMP :: Text Tool Jumping To Other Tools While Type In Text
Oct 26, 2013First it stops pasting anything except the first thing copied when Gimp opens, and now this. When I try to search for a font or type in text in the text tool in Gimp 2.8, it just jumps to random other tools instead of typing.
Why can't this program ever seem to work FULLY?
AutoCad 2D :: Plotting To PDF Text Turns Out Bold
Oct 29, 2008I am using autocad 08 LT and everytime i plot to pdf using standard cad dwg to pdf.pc3 the txt turns out bold.
View 9 Replies View RelatedGIMP :: How To Make GIF Look Less Pixelated Using Sharpen Tool
Dec 31, 2013I'm not satisfied with the huge quality loss after scaling the layers and sharpening them. What to do so it will look less crappy? What should I do? Also I want to mention that I'm doing gifs from videos using KMPlayer to extract the frames and the videos are in mp4 format and HD quality.
View 3 Replies View RelatedGIMP :: Best Tool To Make Simple Objects
Oct 13, 2012I have to do something in school where I have to make simple objects like laptops, speakers etc. These objects must be kept really simple, so no high detail or anything and they can't have a black outline around them.
What I wanted to know is, which tool can I create these simple objects with? They have to look smooth, they must have round edges and there cannot be an outline around them.
GIMP :: Clone Tool Won't Make A Circle
Oct 19, 2012I was merrily cloning away and somehow or another my clone tool changed into a very thin elipse rather than a circle. I didn't knowingly do anything to make it change.
I then made sure it was on the round fuzzy tool brush - but it insisted on making an elipse.
AutoCad :: Text Changes Into Bold Text
Mar 21, 2013I am in ACAD lite 2008, and the text on some but not all leaters and dimension will change into bold text.
View 3 Replies View RelatedPhotoshop :: Random Text Appearing Bold When Creating PDF From CS5
Feb 22, 2012I am a relative newcomer to Photoshop CS5. I have been creating a document with a background image layer and a couple of text box layers. The font is set at Arial, italic, sharp. When I save the document as a PDF file, random words appear in bold. I have tried deleting these words in the PSD document text layer and retyping them but they still appear as bold in the PDF file. Interestingly when I save as a JPEG image the bold words appear as normal. CS5 version is 12.0.4 and OS is Windows XP.
View 8 Replies View RelatedAutoCAD Architecture :: Mtext Font - Some Text Is Bold And Some Not
Jun 29, 2012I have a detail section of millwork ... and some of the text is bold and some are not. But the weird thing is that all the text is from the same style, none of the text is bold and they are all the same size. So why are some bold and some not? See attached, running Autocad Architecture 2011 on XP 64.
View 9 Replies View RelatedAutoCAD 2013 :: Text Appearing Bold And Blurry?
May 24, 2012This is a problem running through only some of my drawings, I have tried forcing the z value to 0, no change. I have tried setting the ucs to current, world, no change. I have tried to flatten the text, no change.
View 9 Replies View RelatedAutoCAD 2010 :: Bold Text When DWG Inserted As Xref?
Sep 17, 2013I have dwg files with Calibri font (our standard font style) that I am trying to xref into one drawing (a bunch of detail dwgs essentially). The detail looks fine in its own dwg - but when I xref the dwg into another dwg some text elements appear bold. I've check ALL of my font styles - nothing is selected to "bold"... I scale the x,y and z to the same scale.
View 7 Replies View RelatedAutoCAD 2010 :: Bold Text In Rotated Blocks?
Jul 10, 2012I have read many topics that talk about TTF text printing bold under various circumstances, but have not found one addressing my exact issue. I have attached a PDF with which I hope to illustrate my problem.
I have a non-annotative, Scale = 1, all elevations = 0, block; My text is PDF's as text whenever the block is left at 90 or is exploded then rotated. But whenever the blocked is rotated (any amount) the text is no longer interpreted as text, it prints bold.
I need to be able to align my blocks to other, rotated, objects in both model and paper space; so this issue is causing my a fair amount of grief. I have been told switching to a shx font is out of the question.