how do I reduce the size of an image and place it adjacent to another image. Let me explain it a bit better. I live on the Corner of two streets . A lamp post with the name of one of the streets is on the corner. I want to reduce the size of and place the image of the other street on the same lamp post.
View 5 RepliesI made a 5x35 image using a gradient that i'll use as background for a div.I saved it as .jpg. Its size now is 325 bytes.Is there any additional method to make the size smaller?
View 3 Replies View RelatedAt work I use Photoshop, but at home I have started using GIMP. One problem I constantly have is the size of pngs. How do you reduce the size of pngs?
I have 400KB png, when I save the same image at home in GIMP as jpg it becomes smaller, but if I save it as png it becomes about 2MB - this is huge compared to photoshop
If I use the save for web plugin, the results are the same for jpgs, but if I save as 24bit png the image suddenly becomes 2.5MB. Why are PNGs in GIMP so large?
PS: I use windows vista, in case this matters.
I found a way to save a sub 1mb XCF file with a select saved as a channel and a layer of the image as a threshold. I can open the original jpg in gimp, select all, copy into new transparent layer in the tiny XCF file, do channel to selection, delete the threshold layer and I'm good to go. I went from a 27 mb xcf to a 0.5 mb xcf with the channel and layer for a 2 mb jpg.
At my low skill level the selects are usually the only XCF elements worth keeping. Everytime I've returned to a saved XCF weeks later because I knew more, I tossed it out and started over from the original jpg unless a select was involved. I could buy a larger HD, but I'm literally living out of 2 suitcases and expect to continue so indefinably. Keeping my pile of stuff small is a prime priority. Store them online? The only internet ISPs available here are rather slow.
GIMP is in single window mode. The bottom of the window extends down below my screen window, below my taskbar, so I can't grab it with my mouse to pull it up and make the window smaller vertically. I have pulled the top blue bar up as far as it will go, but not far enough - How do I shrink the GIMP window vertically?
View 3 Replies View RelatedHow can I reduce the size of the Pencil tool to as little as 1 or 2 pixels? I want to draw fairly fine shadows, and have figured out that creating shadows requires smudging or blurring gradients of black-to-grey, but the default options in the Brushes toolbox are far, far too large.
View 1 Replies View RelatedI have an image that I took in RAW with a Canon 5D. I then masked a large portion of the image using the adjustments brush. The result was what I wanted but the image is now very large. I exported the image to a DNG to retain editability. The resulting DNG is 53,679 kb. If I export the image to a JPG at 25% quality limiting the size to 2000 pixels on the longest edge I still get a 7,795 kb image.
I have had this problem with masking before. Is there any way to get rid of the bloat that the masking caused?
I want to reduce the file size of an image
its 23kb and I want it at 10kb or less
I dont care about losing image quality
I'm using photoshop cs4
I am a fairly novice user of Illustrator. I have my company logo in an .AI and .PNG format. I need to "shrink" the image while perserving the image quality. I am trying to design an ad for my business and the file is too big for the dimensions of the ad in photoshop. When i attempt to reduce the file size (Edit--> Free Transform) I am able to "shrink" the logo down to fit (about 70% reduction), but it turns out very blurry and not sharp. The sharpen filter does not seem to work.
I have been told I need to take the .AI file, and shink the logo there, then converting to a PNG to be placed into the ad. I **think** I did this, but the image still turns out blurry.
I was given an image with these dimensions:
w: 13.89 x h: 5.56 inches.
I'm being asked to make it fit these dimensions:
w: 8.5 x h: 5.47 inches
How to achieve this without the picture looking stretched, in terms of it's height. Everything looks constrained when you just do the image or canvas resize.
How do you reduce an image?
View 1 Replies View RelatedWhat is the best way to reduce an image's file size (say by 50%) so that someone with limited RAM can work on the file and then when they are done restore the file back to its 100% size for final output--without sacrificing resolution or pixels. File is a layered psd and will eventually be going to print.
View 3 Replies View RelatedI have a vector that is 1000 pixels wide and 500 pixels high. How do I reduce it down to 1000pixels wide and 120 pixels high? Can I do that without distorting the image?
View 2 Replies View RelatedI have some really large blueprints (black and white). Some of them exceed 30000 x 8000 in size. I want to reduce the overall size of these but when I try this my image gets really fuzzy. Is there a way to make these images smaller without messing up the clarity?
View 7 Replies View RelatedWhen you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies View RelatedCurrently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies View RelatedI'm using gimp 2.6 on ubuntu. i have some pictures i would like to enhance.
There's that image image 1
and i would like to make it look like image 2
As you can see the second image uses only about 7 or 8 different colors and the outer lines are nice and smooth not stuttering.
Is there a way how i can change the first image to something like the second one, maybe something like replace 10 different colors which are similar to each other with only 1?
I tried and played with the options (bucketfill, posterise, or the cartoon option from artistic menu, increase contrast, brightness etc...
Is there an option to smoth the outer lines etc? i just want the dog, the rest of the background is not so important.
I have a 900x900 px image, and a 900x900 px artboard.
When I place the image on the artboard, the image is 675.094x675.094 px
How can I place the image at its native size?
Windows 7 | CS5
I have a psd image containing a number of layers, and a png image with a transparent background. I want to place the png image in the psd image but I'm not having much luck. If I copy and paste the png image, all I get is a selection outline, not the image itself. I created a new layer for the psd image before pasting, but obviously I'm doing something wrong.
View 1 Replies View RelatedA book scan produced about 250 images (one per page) that have gray around the edges where the old paper was yellowed (almost brown). I want to write a batch program to place a white frame of a specified width around the perimeter of the images to eliminate this unwanted gray. How can I do this?
View 3 Replies View RelatedI am making some new business cards in Gimp 2.6.11 on Windows OS. What is the best way to place the card image onto a format that prints a sheet of Avery labels? Is that an external plugin? Where would I find that resource?
View 5 Replies View RelatedWe use ACAD2013 at our office. we use xref files of other dept. to create our drawings. We mainly do piping drawings and use quiet a few blocks for fittings and equipments.
The file sizes up to 30MB and sometimes even more. Purge ( all options ) and audit were done but of no use to reduce size. Even deleted unused anno scales.
I got the scale of model wrong and I need to reduce the size of my Bip001.
View 1 Replies View RelatedI got a tremendous amount of assistance from Rich 2005 about increasing the size of a particular image last week. I applied the same technique to another image with poor results. (Much loss of clarity, worsened by sharpening.) I imagine there are several ways to increase image size. Is there a way to increase this one without losing clarity?The first image is the original, the second is increased 100 percent, without sharpening.
View 2 Replies View RelatedI need to design a vinyl banner using GIMP. The size of the banner will be 4'X8'. What size should I set the starting image size WXH ?? Should I keep it at pixels instead of footage?
View 1 Replies View RelatedWhen I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
I'm a former Photoshop user. The reason I no longer use it is because of a silly misunderstanding with the NSA and MI6. But hey, that's the past and I'm a believer in moving on.
Anyway, my first inquiry here is a simple one having to do with selection. When I used PS I would at times use the wand selector and then open a new file which already had the dimensions of the selection. Thing is, when I select something in Gimp and open up the new file it still has the same size as the main image from which an area was selected, i.e., if the main image was 500x500 and I selected something 100x100 the copy was still 500x500.
And I can assure you it has nothing to do with remote viewing and foreign embassies.
I'm using Gimp 2.8 on Fedora 17 i686. I have noticed that when I cancel out of set image canvas size and return to set image canvas size I have no preview image. I was wondering if this is a problem with Gimp
View 1 Replies View RelatedSurprised I could not turn this up in the Search. Whenever I open a new image to resize it, it does not change size, but sometimes I have seen it larger than this standard size. I need more space for my work, I dont like working with Zoom, or small print. How can I fix setting new image size so the entire background will increase?
View 10 Replies View RelatedIn CS6, why the file size remains same after croping? And how do I reduce the size after each croping?
View 1 Replies View RelatedI have Created few GIf images for website site but it not support big file size my all gif file size maximum 80 kb. i used few online tool for reduce size but after my images showing blur, I reduced file size and image still remain same. big file size take load time when upload in website, check example URL....and gif banner.
View 1 Replies View Related