GIMP :: Using ICC Profile Between Different OS?
Jan 19, 2012In case I have a hard time running some colorimeter under linux , is it okay if I create an ICC profile under windows and then use it in linux?
View 1 Replies
ADVERTISEMENT
GIMP :: What Colour Profile Does Use By Default
Jun 28, 2013My printer company is insisting that I convert my image to a CMYK profile.
After a bit of googeling it seems that a good generic CMYK profile might be ISOcoated_v2_300_eci.icc
And I found a utility to to do the conversion (URL]. However this utility wants to know what the source colour profile is. So, what does the GIMP use? I.e. if I create a new .XCF and paste in some images and do a bit of painting etc, and then save it as a .JPG, what profile will it be in?
Is the answer none? But I still need something for this utility. Or is it sRGB? There seems to be several variations.
GIMP :: Profile Location For 2.8 In Windows?
Feb 9, 2013To the 2.8 users....
Where is the profile for Gimp 2.8 in Windows? I have the hazy memory that it's going to change to be available as part of the "Roaming" profile.
GIMP :: How To Get Clarity In Indexed Color Profile
Jun 13, 2013I was quite surprised this image I found was an indexed color profile... when I was new (and dumb) to Gimp and images in general I used to save transparent gifs rather than transparent pngs... because I didn't know PNGs could be transparent but Gimp would warn me about that it would convert to indexed and I'd lose A LOT of color & clarity... none of my indexed images were very clear nor this colorful... how is it possible to obtain such color and clarity in an indexed color profile like in the image attached?
View 2 Replies View RelatedGIMP :: ICC Convert To Colour Profile Impossible
Nov 23, 2012I can't find a way to import an .icc into my GIMP work.
I want to do this so that the pictures on my computer monitor match as closely as possible to the prints from my local (high-end) print shop. My screen is Spyder calibrated.
I'm trying;
Image >>> Mode >>> Convert To Colour Profile >>> (and then from the pop-up box) >>> Convert to ... (and then from the pop-up box) >>> Select Colour Profile From Disk
... and then I select the new .icc (provided to customers on the print shop's website) from a Downloads folder on my local drive.
That all sounds right doesn't it?
It stubbornly remains on sRGB.icc
I've also tried the process in;
Edit >>> Preferences >>> Colour Management
Same result - ignores the selection of a new .icc and remains stuck on sRGB.icc.
I'm desperately trying to colour correct for printing today.
GIMP :: Current Color Profile When Opening As Layers
Oct 6, 2011I'm importing several hundred .png files to be played back as a gif and get this window popup several hundred times:
How do i go about disabling the message? it gets tedious "okaying" after just a few.
GIMP :: Which Viewer Is Reading Color Profile Correctly
Jun 29, 2013I'm trying to get my head around color profiles. I created a test image with the GIMP...
and then converted it to CMYK (ISO Coated V2 300% ICI) using [URL] (I checked that the color profile data survives the upload, so if you want to try it yourself, click on the image to get it full size and then download it)
Then I compare the two images side by side on the monitor using various viewer apps. Depending on the app that I use, the colors in the converted image either look the same as the original or darker and washed out:
1) SlowView and IrfanView display the colors as identical to the original.
2) Windows photo viewer, windows explorer and the GIMP display the colors as darker.
See screen capture below of the 2 different outputs ...
So maybe some viewer apps are not reading the embedded color profile. But which one is correct? CMYK is for printing and it has a smaller range of colors, but surely if the viewer app is doing things properly, it will read the embedded profile and convert teh pixels so that they will appear very similar to the original.
(In the GIMP settings I have Edit > Preferences > Color management > File settings = 'ask what to do', but it doesnt ask me when I open the image so I am suspicious that it may not be seeing the profile information).
GIMP :: User Profile / Fonts Versus System Fonts
Oct 21, 2013never knew there has a font folder in the user profile for Gimp until I wiped my user profile and moved all patterns, gradients, brushes, etc I have been putting in the program folder to the user profile folder because I read on here that it is better to keep all that stuff in the user profile folder of Gimp... my question is, what is the difference between installing your fonts into the system and placing them into the fonts folder in Gimp (besides all programs being able to use them)?? I've been installing all my fonts into the system I wanna use in Gimp... is it better to use the font folder in the Gimp user profile or to install them into the system?
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile Geometry Points Of Superimposed Profile To Alignment Label
Mar 1, 2013I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View
Nov 4, 2013I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown
Mar 14, 2013Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
AutoCAD Architecture :: Raised Decking Profile / Create A Profile / Wall Style
Oct 9, 2011I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedPhotoshop :: Use Protanopia (Color Blind) Profile As Regular Profile That Can Be Converted?
Sep 30, 2013I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?
Mar 5, 2012I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedAutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile
Jun 17, 2013I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedAutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report
Jan 17, 2012I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
Lightroom :: Enable Profile Corrections Auto Setting Doesn't Find X100s Profile In 4.4
Mar 27, 2014In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
AutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile
Jun 28, 2012The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
Photoshop :: How To Add Custom Working Space Profile To Profile List In CS6
Jan 28, 2013How do you add a custom working space profile to the profile list in CS6.
View 1 Replies View RelatedAutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile
Nov 22, 2013I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update
Jul 24, 2012I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2
Jul 17, 2012differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
AutoCAD Architecture :: Transferring Tool Palettes From One Profile To Another Profile
Feb 7, 2012I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
AutoCAD 2013 :: Can't Polyline Or Spline Profile Into Closed Profile?
Apr 11, 2012The attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedAutoCAD Civil 3D :: Create Proposed Profile From Surface Profile
Mar 17, 2011We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
AutoCAD Civil 3D :: Profile Band / Profile Structure Mask
Jul 9, 2012where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View
Nov 28, 2012Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
AutoCAD Civil 3D :: Adding Profile To Existing Profile Views
May 10, 2013I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View RelatedIllustrator Scripting :: Missing Profile - Doc Does Not Have Embedded CMYK Profile
Apr 2, 2012Each time I open a file in AI - CS3 I get the same message: "Missing Profile - The doc does not have an embedded CMYK profile". I looked in library>colorsync>profiles and sure enough they were gone? I downloaded new profiles from Adobe, installed them in library>colorsync>profiles - and still the same thing with each file I open. I dragged AI to the trash, re-installed AI from my disc repeated the process with the same results .
View 10 Replies View RelatedPhotoshop :: C2 Profile Slipping Through Profile Mismatch Warning?
Jan 16, 2013this file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies View Related