GIMP :: Set Two New Shortcuts (increasing And Decreasing) Value 1 By 25 Points
Mar 31, 2013
In my case value 1 is opacity which has range about (0;100>
I find [decrease value 1 more] shortcut not significant enough for it changes value by 10 points, while [decrease value 1 relative] when its value is (50;100> also changes it by about 10 points and even less when its value is below about 50.
My question is: Is it possible to set two new shortcuts (increasing and decreasing) value 1 by 25 points? Is there maybe a recording option in gimp like in photoshop.
View 3 Replies
ADVERTISEMENT
Nov 14, 2012
I find myself in the unfortunate position of having to resize a lot of text by one point size. So I wanted to find the key command for decreasing the text size by 1 point. I found several things online that worked... except they decrease it by TWO points. Not one. They are:
Command Shift <
and
Command Shift .
Both work... except they decrease the font by 2 point sizes. How can I make it go down only ONE point size?
PS I'm using CS4. And I can't select all the text because I need some of it to stay as is... while reducing the size of other text. Oh, and I'm on an iMac.
View 4 Replies
View Related
May 9, 2012
Where do I set the keyboard shortcut for increasing/decreasing text size in Photoshop CS5? I know it is supposed to be Keyboard shortcuts, but I don't find it in there.
View 4 Replies
View Related
Apr 15, 2013
I would like to be able to create a box around text that is able to resize when increasing/decreasing font.
My working solution is to create a text box with text then use direct selection tool to select the anchors and convert that into a shape, either a rectangle or rounded rectangle. This isn't bad since it allows an equal amount of space around the text but it does have problems. If the font size increases or decreases, the box remains the same. I have to use the Area Type Option to resize the box. Also, if I wanted to do this for lots of boxes then I have to select all of the individual anchors which will be time consuming.
View 1 Replies
View Related
Sep 4, 2012
How can I increase the display size of anchor points? i.e. the vertices.? they are too small to see clearly. i am used to vertice point size of coreldraw.
View 8 Replies
View Related
Apr 12, 2012
I have a Drawing "A" that is the source drawing containing the existing ground surface, topographic linework and features, and points in the Survey Database which are under the Survey tab.
I have a Drawing "B" that is the source drawing containing the Design alignment and profile with references to the data in Drawing "A" such as the surface.
If I create additional points for survey stakeout purposes within Drawing "B", will it automatically be included in the survey database in Drawing "A" along with all the other points or is there some procedure in order for me to continue adding additional points into the database from Drawing "B" or any other drawing that references Drawing "A"?
View 7 Replies
View Related
Sep 7, 2013
I just upgraded to GIMP 2.8.4 for Mac after spending months using an older version. At the bottom of the image window are tips for using whatever tool one is currently using. Unfortunately, these tips are TINY! I can barely see them! Is there any way to increase their size via GIMP preferences?
Note that I am not very knowledgeable when it comes to editing program code so if this is required I will need specific step by step instructions.
EDIT: Additionally, I've noticed that image windows always stay behind the toolbox and layer windows. Is there any way to reverse the ordering? (So that image windows can move in front of the toolbox/layer window?) With multiple image windows open on a small screen I need all the space I can get.
View 7 Replies
View Related
Jul 22, 2013
How to manage to use those shortcuts.. many many times they just dont work.. particularly "tab" shortcut. Will this be fixed in later gimp versions, or its just as good as it can get?
View 3 Replies
View Related
Feb 13, 2013
Is there anyway I can add my own keyboard shortcuts?
For example, I want to save an image as a jpg The only way I have found is to 'Export' (Is this the right way?)
The problem is that after getting the File menu (alt F), there's no way of getting to the 'Export' option by one key stroke (I suppose you can always press the down or up arrow - but that doesn't count - takes too long)
Is there anyway I can create my own keyboard shortcuts?
If not, maybe I'll try AutoHotkey
View 5 Replies
View Related
May 15, 2012
I would like to be able to use Keyboard shortcuts in Gimp. I see only a very few. Can I make shortcuts for things I use regularly? I need shortcuts especially for levels. save,deselect, hide selection outline, and some tools--
View 6 Replies
View Related
Jun 24, 2013
I tweaked the Gimp shortcuts to fit my needs, and i found that a lot of shortcuts won't work, is there a list of shortcuts that can't be used in Gimp?
- F2 is trying to rename the layer if your focus on the layer tab (is it possible to disable it?)
- F10 is opening the Gimp Menu
- F1 is help
- F6 and F8 won't work
View 3 Replies
View Related
Sep 1, 2013
I added a shortcut (Alt-backtick) to invoke a script I had written. I seem to be able to run it once only, but only sometimes, and there seems to be come interaction with other shortcut functions that I can't characterise. The script starts with a dialog.
start GimpSelect XCF file from recents list.Alt-backtick - opens dialog of my scriptClick on OK - script executes successfullyAlt-backtick - DOES NOTHING Also, once this happens things get screwy. Usually the functionality of Ctrl-F gets clobbered also, and I also had an occasion where my shortcut executed the functionality of Ctr-F - i.e. I had just applied a drop shadow, and Ant-backtick repeated that function.
Exiting and restarting Gimp returns things to normal (but broken).
My script just adds an entry field to export-selection.scm so I can enter a filename for the PNG file.
View 4 Replies
View Related
Aug 27, 2013
I'm using Gimp 2.8.4 on Kubuntu 13.04.
When I change to single window mode, the Shortcuts disappear from the tooltips of the tools window (ie. 'E' for Elipse, 'Shift+B' for Bucket etc). The tooltips still work, and I can still check them on the tools menu (alt+t). But it would be nice to be able to see them on the mouseover tooltip. If I close Gimp and reopen, the shortcuts show up again on the tooltips. But if I change to single window mode again, they will disappear one more time.
View 1 Replies
View Related
Dec 2, 2012
A new feature in 2.8 appears to be keyboard accelerators (shortcuts) forthe pull-down menus. For example, Alt-S displays the Select menu, Alt-Wthe Windows menu, etc.
I have already assigned these key-combinations to other functions in thekeyboard shortcuts menu, but the default menubar assignments are takingprecedence.
How can I disable these menu accelerators so that I can regain the use ofthe Alt-[ESVILCTRWH] sequences?
Maybe there should be a toggle on the Configure Keyboard Shortcuts menu tohandle this. And certainly, if you reassign these keystrokes in the menu,their original function should be disabled.
View 4 Replies
View Related
Jan 19, 2014
I'd like to assign keyboard shortcuts to items under the Colors tab. Is it possible and if so, how?
View 2 Replies
View Related
Jul 11, 2008
I have, up until I got CS3 and the new aluminum keyboard, not had any issues with this.
I have numerous, common actions recorded which have F keys assigned to as shortcuts.
F10, which turns sound off in the OS on an aluminum keyboard, overrides my Photoshop shortcut.
I've lost my 12 or so most common action shortucts in Photoshop because of this! That is about a 5% loss in productivity...
View 2 Replies
View Related
Aug 18, 2007
is there any way to make gradyally decreasing in size circles in photoshop. like on car windshields in edges if you noticed, starts from black and then it sort of fades away with pattern.
Falftone effect creates crappy jagged circles. I am attaching approximately what Im talking about, manually made every layer for it...
View 1 Replies
View Related
Nov 24, 2013
I'm trying to emulate this cool sort-of-film-like look that's been so popular lately on various places around the web, namely with decreased dynamical range. In Photoshop you can do it just by adjusting the output levels. How to do the same in Lightroom? The only thing I could think of was pushing the Fill Light slider to extremes, but it doesn't o the job. I'm on Lr3.
View 1 Replies
View Related
Mar 29, 2013
Why is the contact- aware scale in grey and therefore unusable?
View 1 Replies
View Related
Nov 27, 2012
I have ProX3 and am trying to create .mov PhotoJPEG video clips. I'm trying to decrease the compression quality since I'm uploading these clips to stock video footage websites. However, when I go to export the video, under the Compression screen the Quality area is grayed out at 100% and won't let me move the tab over to decrease it. How to change it?
View 4 Replies
View Related
Mar 6, 2007
i've managed to layer a scanned drawing (and edit it and all) over the given template... but when i drag it over, it's HUGE. so of course, i haev to decrease the size so it fits on the t shirt template...
and when i decrease the size, it gets grainy and pixilated... and i can't have that happen! especially on a t shirt design... it's supposed to be a a solid, single line...
View 3 Replies
View Related
Mar 14, 2007
I made a huge mistake when I began my latest design project. I made it too large. Now, I need some help to decrease the size. Even if the quality of the image will get alot worse. The file is huge so I can't use the "Save for web.." option. So, pleae help me. How do I decrease the the image quality and thus the file size?
View 6 Replies
View Related
Mar 4, 2013
the shortcut in the mac version (CS6) for in-/decreasing the font size is apparently "Cmd + Shift + >".shortcut for windows versions? I can't find anything in the shortcut overview.
View 4 Replies
View Related
Apr 15, 2013
I made a time lapse video which I then saved as a .VSP file. Then i open a new project and import the VSP file as a video. Then I made some color corrections including an extra point or two of saturation, contrast and brightness. After exporting the video as a 1920x1080 WMV or MP4, i notice a significant reduction in quality compared to the ones where i did not make color corrections. The video appears blurrier like it was exported at a lower resolution. Modifying any of the sliders appears to trigger the effect. I duplicated the problem with a time lapse project consisting of just 5 pictures so there is nothing else in the project. No animations, titles or anything.
View 5 Replies
View Related
Jul 10, 2012
I'm currently working on a model where I'm subjecting a vertical wire (5 micron radius, 20 micron height) to a transverse load. I made an assembly of a 18 micron length section and a 2 micron length section, so that I can apply my force to the 2 micron tip, while leaving the bottom face of the wire fixed. I am trying to find the minimal force needed to fracture the wire (i.e., altering the force until the max stress hits the material's ultimate tensile strength). However, I've realized that decreasing the mesh size drastically changes my results, Obviously, decreasing mesh size should increase the accuracy of the results. Instead, by decreasing the mesh size, I actually am diverging from my results.
View 2 Replies
View Related
May 20, 2012
I'm trying to enlarge a sprite to recieve better colorization, and it makes the image lose opacity when I do so?
View 1 Replies
View Related
Jan 20, 2013
I have a small company doing designs onto mugs, steins, pints, etc. I recently added the ability to do custom photo designs, so now I'm trying to perfect the image curvature for my pint glasses and coming up against a problem.
So - with a pint glass, in order to put a design on it you actually have to curve the image. I'm following this tutorial here - [URL] where he shows how to use GIMP to curve a photo to insert into a tumbler.
I am doing the same process except my dimensions/numbers are different. I need to be able to create the appropriate .points file for my pint glasses but if I use the one he created, my image will be off since the pints don't have the same dimensions as the tumbler he did the tutorial for.
SO - all this to say - how the heck do I calculate what values to put in the points file? For example, on this particular project I need to make an image to be curved up 5/8" on the bottom and 3/4" on the top. He used .25" and .3125" so if I use his file, my designs won't be right.
View 3 Replies
View Related
Dec 2, 2012
I choose the Free Select Tool and painstakingly click around the border of something to remove the background. Typically it's a car and I do hundreds of tiny free select points tracing around the car's outline. I make my way around the entire car and double-click to connect the last point with the first one. Then all the selection points disappear, I have no selection around the car, and I'm unhappy.
Here's what happened. Before I started working I inadvertently had done a "Select All". The Free Select Tool was inadvertently left in "Add" mode. GIMP did what it was supposed to do, it added the car outline selection to the "Select All" selection - with the result equal to "Select All" - and there goes all my selection points around the car.
You can end up in the same bad place when "Select None" has been done and you inadvertently left the Free Select Tool in "subtract" mode.
View 1 Replies
View Related
Oct 17, 2003
I have already made this business card.. but the business card maker company tells me to increase the DPI to 600.. i am using an image of a car in it.. well how can i make the best(600) Dpi business card? without making the whole thing all over again
View 9 Replies
View Related
Apr 9, 2008
I'm by no means a graphic designer, but my job is having me create a 3' x 2' poster (300 ppi) using Photoshop CS3. I am trying to place a few logos on the poster but am having difficulties. My logos are currently about 20 inches wide, and I would like to keep them this width. However, the resolution is 72 ppi. Obviously when I change it to 300 ppi, Photoshop automatically decreases the image size. Is it possible to make the logos 300 ppi and keep the original document sizes?
Or, alternatively, I would like to print this poster on canvas with a local printing company. Is it possible for me to create a smaller version of the 3' x 2' poster (perhaps with a smaller ppi?) without losing too much of the clarity, which the printing company could then blow up to 3'x2'?
View 4 Replies
View Related
Jul 17, 2006
how do i go about increasing a finished products contrast without losing its color values? you know, i don't want it to look completely faded. is there any way around this?
View 1 Replies
View Related
