GIMP :: JPG Images Open In Bad Quality?
Feb 7, 2013
Toady I've noticed that Gimp opens high quality jpg images in lower quality than their original ones.I made sure by opening the image using another software, and it gave me apparent good jpg quality that i expect.Please check attachments (see the red button).Noting that when i saved the opened image form Gimp using the maximum quality (100%), it saved in a lower quality that was on-screen visible when it was opened. it is a bug?
I'm using Gimp 2.8.2 on a Windows 7 machine.
View 8 Replies
ADVERTISEMENT
Jan 12, 2014
Is there any way I can scale images down in size, whilst keeping the quality of the image? I am a Media teacher having to use this software with the class and they must have high production values for their controlled assessment. However, I do not know how to get around the problem that all the work is predominantly blurred because students have scaled down the pictures resulting in horrendous blurring.
View 3 Replies
View Related
Jun 23, 2012
My problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
View 2 Replies
View Related
Aug 31, 2012
When I go to the open menu and navigate to a jpg image and click "OPEN", nothing happens. The open dialog stays but the buttons are greyed out.
View 3 Replies
View Related
Jan 16, 2014
I've just installed Gimp 2.8.10 on my fresh Win 8.1 x64 installation and I cannot export or open any type of image 'cos there isn't a single option to choose a file type when exporting and also, Gimp doesn't recognise images on my hdd when I try to open them.
So far I've used Gimp on Win 7 x64 and didn't have any problems. The only driver I currently have installed on my system is the graphics driver.
View 1 Replies
View Related
Apr 9, 2011
Basically what I need to do is capture a video shot, and place a play button on top of it. I thought the simplest way would be to just open each image as a separate layer but couldn't find a way to do that.
Eventually I made the screen shot the background image of an html page, and the play button the foreground image. Then I was able to position them just the way I wanted and capture a screen shot, then trim and edit in Gimp.
View 3 Replies
View Related
Aug 31, 2012
I'm trying to work with TIFF images got from Image Pro Plus butGIMP 2.8 doesn't open them, I found that's a problem related to Image ProPlus because misses some tags. Also, I tried with ImageMagick using:
convert "prueba 1.tif" "prueba 1.png"
convert "prueba 1.tif" "prueba 2.tif"
The first works fine, just with some warnings, PNG image was createdsuccesfully.
The second doesn't work and in any case if I do:
convert "prueba 1.tif" -identify
got:
convert: incorrect count for field "DateTime" (27, expecting 20); tagtrimmed. `prueba 1.tif'.
convert: prueba 1.tif: unknown field with tag 40001 (0x9c41) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50288 (0xc470) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50291 (0xc473) encountered.`TIFFReadDirectory'.
Original image got from Image Pro Plus: [URL]
View 4 Replies
View Related
Oct 7, 2011
My gimp opens all images in small thumbnail size (160 120). How can I get rid of this and get the files opened in their original size. I am running ubuntu 11.04 and gimp 2.6.11, and utilizing .NEF (nikon raw)
I have tried to remove $HOME/.gimp-2.6 - that didn't seem to work. I have installed and uninstalled ufraw - that didn't seem to work I have looked at gimp preferences, don't see there anything which would define reading in images into "thumbnail" size.
I am suspecting that after installing ufraw this problem appeared and I seem not be able to get rid of it. Removing $HOME/.ufrawrc didn't useful.
View 3 Replies
View Related
Jun 1, 2013
I am looking for the shortcut that allows me to move between different image windows in Gimp. In "other" applications, CTRL-TAB cycles between open images, but it doesn't work in Gimp.
Is there a keyboard shortcut to cycle between open images?
View 2 Replies
View Related
Sep 23, 2013
I would like to use the Bash command line to open two images into GIMP, each image on a layer. The code below opens the two images into separate GIMP windows.
>> gimp image1.jpg image2.jpg
How can I open the two images into one GIMP window and two layers?
View 4 Replies
View Related
Jan 15, 2013
Why can't I open my images in iPhoto to import photos to work with? I tried dragging them in, and I tried opening my iPhoto from the Gimp importer window, nothing seems to work.
View 5 Replies
View Related
May 27, 2011
I have a task that I repeat all the time, where I have about 20 digital photos that are all taken of something the same size, at the same magnification, but not centered identically. I then need similarly centered, identical size and shape cropped images for all of the images. In Photoshop, a friend with the exact same task solves this by opening all of the images, making a rectangular selection of the appropriate size and shape by eye on the first image, and then dragging this rectangular selection from this first image into each other open images and hand-positioning in each image as he drags it in, so that all of the selections for cropping the images are the same shape and size, and can be individually positioned, rapidly. This exact solution is perfect for this task, and although it works great in Photoshop, selections can't be dragged intact from image to image in the same way in gimp 2.6.11 on ubuntu 11.04/gnome 2.32.1/linux 2.6.38-8 generic , so I am looking for a way to accomplish something similar.
View 4 Replies
View Related
Oct 29, 2012
I am working on pdf file, in which all the assets has been created in illustrator. I am opening that file in illustrator, and by save for web option exporting the images. But somehow the images as not proper. There are some colour related issues and also the images are not proper.
Is there any other way around so that I can extract those without loosing the quality ?
View 5 Replies
View Related
Feb 20, 2012
I know how to combine or merge tow images in Photoshop CS5
But if I use images from the Internet, mostly by seaching in Google picture search. The images has different quality, such as colors and lightning.
Is there a way in Photoshop to combine the colors in two images, so they have the same color tones. So as speak, look like the same quality.
How do I meassure and compare the colors and light in-side Photoshop.
View 4 Replies
View Related
Nov 25, 2008
I've been having problems with Photoshop CS3 lately, for some reason the image quality is always horrible when I'm working on a PSD.
As you can, see the gradient quality is HORRIBLE.
All I did was add a slightly lighter shade of gray over the background, I have dither checked, I'm using RGB mode, and I'm using 8-bits channeled..
But if I do a simple white to black gradient it turns out smooth, the bad quality gradient only happens when it's two dark colors.
View 7 Replies
View Related
Apr 23, 2013
I would like to know if there's any possible way of increasing the quality of a low resolution image? if sharpening the image might make a difference.
View 3 Replies
View Related
Feb 8, 2009
I only need to shrink images down from 350x490 pixels to 62x87. When I use the image resize in photoshop i get pixelated and quite blocky results. ) Any idea on how to resize these images to match the previous quality.
View 1 Replies
View Related
Jan 10, 2009
How can I take a small image in Photoshop and enlarge them without changing the quality. When I resize or enlarge images they get really blurry. How can I resize or enlarge a small image in Photoshop without changing the quality?
View 4 Replies
View Related
Jan 10, 2009
How can I take a small image in Photoshop and enlarge them without changing the quality. When I resize or enlarge images they get really blurry. How can I resize or enlarge a small image in Photoshop without changing the quality?
View 1 Replies
View Related
Jan 1, 2009
I work in PS CS2, and I would like to know some basic techniques for "cleaning" this jpegs as being extracted from a dvd often look quite fuzzy, so that they look quality enough to print on a larger scale! edit: oh yeah and can someone also redirect to a good tool for capturing stills? I used vlc player so far, but it only gives out png's...probably not the best format.
View 1 Replies
View Related
Feb 25, 2011
Are there any good video tutorials for redrawing logo such as the one I'm including. Some of my clients don't have the original artwork and I'm stuck with having to redraw small images to get better quality.
View 2 Replies
View Related
Nov 15, 2012
I will make an application for windows 8. So in the application, i will use traffic signs. However i need to seperate the icons one by one and save all of the icons one by one as "png" so how can i do this? you can download "AI" file by this link:[URL]
View 2 Replies
View Related
Sep 5, 2013
Bringing in 12mp images from Nikon camera and losing quality (blurry edges, low quality, etc). Is there a setting I can change or is this what we have to deal with on ps touch?
View 1 Replies
View Related
Oct 30, 2012
I'm starting to work with big format photos much more these days. I'm designing albums which will contain a few pics per spread. When designing the pages sometimes i need to CTRL+T (shrink or enlarge) the images. So the question is, do these images lose (print) quality with all the CTRL + T?
BTW i never decrease the resolution, image size.
View 1 Replies
View Related
Jan 27, 2012
Our customers have given us some black and white Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 6 Replies
View Related
Sep 15, 2013
Corel Draw Home && Student Suite X5 / Win 7.
Problem: All images are poor quality. I've tried clicking on enhanced view. That didn't work. This is across Draw, Photo Paint and Connect. I tried to alter a logo in Paint a year ago. I thought maybe it was just my machine causing the problem. But, I emailed to my brother and it was just as blurry on his machine. I've tried to look at Clip Art and the vector images are really bad--especially ones from previous versions of Corel.
View 11 Replies
View Related
Sep 11, 2008
I want to re size a lot of images to a lower quality. Is there a way of doing this process without having to open each individual file time after time. All the images are different sizes. I just want to lower the size of the file for putting in a pdf catalogue.
View 5 Replies
View Related
Jul 14, 2013
When I make a standard print of any object, I normally offer two or three views, I also include an isometric view of the object that I draw in a 3-D program, and I cut and paste a screen shot of that image into my Autocad file. I do this for the few of our Brothers who have a problem reading standard blueprints for their own reasons. After cut and paste, I find that the image quality is extremely poor, with ragged and unclear edges, I am not sure but I think the poor quality edges are called tesselation. Is there a solution to this condition?
View 2 Replies
View Related
Dec 19, 2013
Just noticed that when I save a job as a pdf in Illustrator CS6 the images become pixelated. The image is currently 300dpi in photoshop. I have tried several methods. I have to scale it down small, but I can't figure I've tried different settings with the pdf.I have also scaled it in photoshop and still doesn't matter.
View 2 Replies
View Related
Apr 24, 2012
In Bridge you can enhance imported thumbnail images to a high quality, however in Lightroom 3 or 4 this does not appear to be the case, with images appearing of a lesser quality. Is there a process in Lightroom which will enhance thumbnail images to a high quality as in Bridge.?
View 1 Replies
View Related
Feb 6, 2014
Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?
View 3 Replies
View Related
