I have been using images for my 3D plant models. Many times the leaf has to be cut out from the background. Through painting black and white areas and then removing the black with a layer mask, then left with the leaf.
Many times I get white or a bad outline around the leaf. Not sure if it's from over exposure with the black and white levels before using the mask or just a slightly poor image(or both).
Is it normal practice to do edging by hand manually on these textures for a crisp outline. Or is there just something I'm not doing right.an auto way of outlining the image and edging it somehow??
I am trying to master cutting out people from backgrounds (especially backgrounds which are a bit complicated - not solid colours). I know there are a number of ways and a number of tools to use, but which is best? The pen tool is great for smooth clean lines, but I struggle with hair and fur on objects. I know there is a more professional way of doing cut outs using Channels and curves and creating a mask.
I am using Designer Pro 6 and suddenly my flyouts will not work. what might have been pressed . I have re started both the computer and xara to no avail.
Not sure whats happened here but the fly-outs in the Tools bar in XDP 7 have suddenly stopped repsonding (i.e. not 'flying out'). The others toolbars work fine, just the Tools bar.
I am trying to print a sunset with cacti and I get a very very green cast on epson r2000. I only get it on the printout and not on the screen. I have the print color management for the right paper etc. ICM is on . I have tried epson vivid and epson rgb, same green unuseable cast. Perceptual vs relative doesn't work. I am new to lightroom. Got it mainly for softproofing and raw processing. OS is windows vista 32 bit I do not get this in pse 11.
I'm using PSP 8. What is the easiest way to place call outs, if that's the right term?
Ideally I'd like to be able to select a rounded, shadowed rectangle with the arrow appropriately positioned (top, bottom, left, right) and of adjustable length, insert the text (typically a single letter or number), and then be able to group these so that I could drag the callout into the required position. I might need to place 10 or 20 on each of several maps, so it needs to be very simple and fast.
I've never properly used 'Picture Tubes' although I have a feeling that would be one way to achieve this. But the images built in to PSP 8 do not include any callouts. Maybe it's best done from first principles, making a set of shapes first and saving them (in empty form) as individual files, positioning them and then finally adding the letter/number separately?
I'm starting my course at University in September and they have issued all the students with a summer project which is to design a T-Shirt. That's great and I can't wait to get cracking, but I want to print my design onto the T-Shirt using transfer paper.
The problem is my printers quality won't develop an effective result and it's too small for what I'm printing, so I would like to know if there are any websites I can use to upload my images to and choose what kind of material it could be printed on (transfer paper in this case) and choose the specific size of the material (e.g. A1-A4 etc).
I have a rectangular chute, tapering in width and height, and intersecting, at an angle, with a round duct. I can't seem to find a way to determine the cut-out in the round duct.
Because the chute tapers projecting the size onto a flat plane to then project onto the round duct doesn't work.
I am photographing and cataloging the paintings and drawings of an artist. There are over 3,000 of them. LR is such a good database that I am hoping I can use just that and add the details into the IPTC data - Title, Medium, Date created, Size, Price, whether sold and to whom, and - crucially - which shelf in the artist's store building they are located.
My idea was to use SlideShow Pro to publish the catalog to the web for dealers to browse, and my experiments show this would work very well, with IPTC data available on mouse-over.
I also need to produce a catalog with images and info for the artist's assistant so that she could quickly locate a requested painting on the correct shelf. Again this seems feasible up to a point as it is possible to print out the photos with IPTC information.
BUT - and here is my problem: I do not want all the info that the artist's assistant needs in the catalog to be available on the public slideshow, so have put different bits of info into different IPTC sections. But then I come across the limitation of printing in LR - only one section of IPTC info is allowed.
As it is I am at the moment also entering the info into a database (File maker Pro). I find on a good day with the wind behind me I can crop and adjust and catalog about 30 paintings an hour in LR. Also adding the info to File maker nearly doubles that. And more importantly it will be clunky and prone to error to have to alter or add to two separate databases in the future.
Is there an easy way to remove all the wipeouts in a drawing without deleting the entities they are attached to?
I have hundreds in some drawings, so I am trying to do a mass editing through lisp, but it won't remove just the wipeout, the text grouped with it gets deleted too.
I have created a file in illustrator 23in x 67in which is 137mb how can I reduce this as small as possible to be able to print it, as when I save it as a pdf it reduces to 27mb which is still to large.
Is there a way to change the color of sheet set titles and call outs so that the text is not obsured by a 50% grey box? Maybe make the grey a bit darker so the text can stand out..
Our text is yellow and it can be hard to read above the grey...
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp 2. Selected a portion of it 3. Used "/Edit/Copy" to copy the selection 4. Used "/Edit/Paste As/New image" to create a new image from the selection 5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss" 6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
The problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
I'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
i was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
i am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
so I mess up on an image and I have to undo more than once... this has happened to me on MULTIPLE occasions!!! the undo feature won't undo as far as I need to!!! Gimp takes it upon itself to use a later action as the base image forcing to to throw the whole image away and start over because I CANNOT go back any more because it says 'base image' when I have done other things prior to the so called base image in the undo history!!!
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
resizing a bigger image to a 5x7 image in gimp? I need the image to be 5x7 but the paper size will be a 8.5x11. How would I resize this image so that I can print it out on a 8.5x11 piece of paper?
In short, I have two images open in Gimp. I need to add one the images to the alpha channel of the other image. How do I go about doing this? I was able to add an alpha channel but beyond that I am lost.
This bit will only make sense to 3D modelers. I have 3D model that I'm importing into a the Unity 3D game engine. One of the material shaders makes use of specularity maps. Normally the specularity map would reside in the alpha channel of the RGBA diffuse image, but due to file sizes, all these are released as separate jpegs. The idea is to make some parts of the 3D model more glossy as far as I know. The only way to do this is to add this specular image to the alpha channel of the diffuse image, and then the game engine can work its magic, making the skin look realistic.
