I am trying to use the Foreground select tool, and while I can select the section I want. WHen it instructs me to press the enter key, I do and everything de-selects.I cannot copy the selection...I'm using a MacBook Pro 10.5.
View 1 RepliesI seem to recall reading something that indicated you could get back to ACR after you have made some changes in Photoshop?
Â
If so, under what circumstances does it work, and which menu items get you there?Can you bring files into a plugin, and then get back to ACR after returning to PS?
Â
I have CS5.1 (with the last patches to CS5.1).
I created a new blank file with 16 bit per channel mode.
I expect that RGB values would be three 16-bit numbers (0 to 65535) but when I try to manually enter a RGB value, each color is still 0 to 255.
From within, is it possible to enter ACR with the image in PS CS6? I need to bypass most of ACRs options when I input a Raw image and would like to go back to ACR after limited processing. I know that I can output the file and re-load it but that is not efficient. I'd like to include the second ACR pass in an action if possible.
View 2 Replies View RelatedI have a Toshiba laptop. When I use the type tool in photoshop, and press either the enter key on the alpha pad or the enter key on the number pad, it does not do a line break. It behaves as if I meant to finish using the type tool. I have flashed my bios and even completely reinstalled Vista (because it was having some other errors as well with Windows) and I still get the problem. Any suggestions?
View 10 Replies View Relatedi try 2 enter text on a image.. any image.. i get an error message Could not complete request because somethign prevented the text engine from initilized.
View 2 Replies View Relatedlet's assume that i am writing my text for two buttons: a:hover and a:active statuses. i am entering the text "links" in the two different buttons (=images.) How do i make sure that the text is exactly in the same places and not entered randomly instead in each button? so that when i clic on the button the text is not "shifted" in some way, but remains in the same position (only the image changes. example button 1: /links button 2: /links
how do i make sure that the word "links" is exactly in the SAME position in both buttons?? thanks.
how to define a distance while placing a wall, but what if the wall needs to be on a specific angle, say 45 deg? I can see the angle being measured but is there a way to enter the angle?
View 8 Replies View Related I've been using PS for a long time. I'm far from even beginner level, I'd say, but I know my way around well enough. I'm using PS CS6 on a Win 7 ENT machine.
Â
If I open a new document, the text tool does nothing.If open a previously saved document, the text tool works just fine. So, I've taken to starting each new document by opening an older one, then modifying it.
Â
Interestingly, in new doc, the text-entry point is exeedingly tiny and sits *inside* the upper left-hand resize box. In an previously opened file, it sits nicely in the upper left-hand corner of the box itself, patiently waiting at the preset font size.
I had to have the logic board on my Macbook Pro Retina replaced and now when I try to start Photoshop CS4 I get an error 150:30 "Licensing for this product has stopped working" but there is no option to re-enter my license key.  How can I re-register my copy of CS4 to my "new" computer?
View 2 Replies View RelatedOn installation i clicked on trial because i couldnt find my serial number and then when i found my serial number i opened photoshop. cant figure out where i go to enter in my serial number so that its no longer doing a trial.
View 1 Replies View RelatedI tried the following code posted in the forum, but i need to know how to break the loop when right click/ Enter Key is pressed.
Following is the code i used:
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
 [Code]....
We cannot enter a caption on photos. This worked for us for thousands of photos in the past but now it ignores the text once we've entered the caption. It allows us to enter an appropriate caption but when we click outside the "caption" box it returns to "Click here to add caption."
View 5 Replies View RelatedI think my problem should be easy to answer, today out of nowhere I suddenly had to type in the file names for different commands such as "save as" or in the layout options "from template" usually there pops up the standard folder list where you can choose the file you want.
In the pic you can see what happens if I'm clicking on "save as".
I have been working on this framing plan and come to find out - much of the text and some of the lines are being entered off of the 0 - Z plane. get everything down to 0? Flatten does not work and I have searched high and low for a resolution, but I'm not getting anywhere.
I know the lines are mostly at 0, which makes it very confusing that the text would enter off of the 0 - Z plane.
I'm having trouble finding this functionality. Is there a way to type say 3+1 into a parameter, like lengthSegs and it result in 4? Or type 1.2* in something like scale X and have it result in 1.2 times whatever the parameter value was?
View 2 Replies View RelatedI just installed the educational version of Inventor and when i go to draw a circle in a sketch i cant enter in a specified radius. Any way to enable that?
View 9 Replies View RelatedI've always used the spacebar as Enter, it speeds up the way i work.I've just load 2013 and i'm using the Drafting & Annotation workspace, now when i use the spacebar it jumps to another command, i have to use the enter key to get it to do what i want.For example.
Type H, (spacebar), S, (Spacebar).
This should be - Hatch > Select,
instead i get 'Hatch' then it cancels the hatch commands and jumps to 'Stretch'
I cannot seem to trap the Enter key in a text box.Â
I tried the following:
Private Sub tbEdit_6_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles tbEdit_6.KeyPress
If Asc(e.KeyChar) = 13 Then
[Code]....
I have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
every time I try to enter / alter text, autocad informs me that it can't find a dictionary for spell checking purposes. I can live with that, but the constant pop-up is getting old.
I tried to reset my Main Dictionary... but it seems to be gone. Is a fresh re-install in order?
See pic attached
text entering error.jpg
Is it possible to enter Excel formulaes eg: =if(a1 = 0; "yes"; "no") into table cells?
I tried doing it, but I only got number symbols as the result (#####).
Illustrator CS6 won't let me enter an exact number into the height and width fields. For instance, if I create a circle and enter 9mm into each field, it gets resized to something like 8.993. If I create a square and enter 144mm x 63mm, Illustrator changes it to 144.005 and 62.999.
Â
I have Snap turned off.
I'm using Photoshop elements 7 and suddenly I can't enter the editor especially full edit
View 1 Replies View RelatedI have a historical collection of B/W photos preparing for sale to auction houses. How do I catalog each photo with custom comments? I have LR 4.4
View 3 Replies View RelatedJust upgraded to PS CS6, and am having a problem manually entering a value for the magnification level in the status bar (same goes for Navigator panel).Is it supposed to automatically zoom to the amount entered without hitting enter/return? For example, if I want 25%, the box will read 2%5 and tells me my value is invalid by the time I hit return (the document will go to 2% automatically before I hit the 5). I can find nothing on this anywhere online, and the documentation mentions typing a number then having to press enter/return. Is this a feature? A glitch? Can it be disabled/fixed?
I am running a Mac and small Cintiq with an on-screen keyboard (so typing speed is slow and screen area at a premium), and the button on the pen (set to be an 'option' key) sticks on occasion.
Type tool quits after return/enter in stead of start a new line. How to fix it?
View 5 Replies View Relatedafter opening mini bridge cannot open bridge after pressing enter?
View 3 Replies View RelatedI downloaded a resume & cover letter template and I am not able to figure out how to delete information and modify existing information to customize these documents.Â
View 2 Replies View Relatedi found once the UVSX6 crash while editing burning disk, it will never enter the 'output to disk' dialog again for existing projects.
View 3 Replies View RelatedPSPRo X.I double click on a jpg image in my pics (XP home) and it shows in the workspace.I click on the "A" text tool and then the background title of the image changes to vector 1.A horizontal blue bar at the top shows with "text entry and a x in it.Right clicking on the image does not do anything, the tools on the left are greyed out.I am unable to enter any text on the image.
View 6 Replies View Related