GIMP :: Cannot Open User Manual Both Local Computer And Online
May 1, 2012
Still having this problem when accessing the user manual (local copy on computer), notepad opens up displaying html code of the user manual as listed above posting.
I went into SAFE mode to see what would happen and the same action resulted. I went into SAFE mode because all security programs would be off.
When I change the setting to use the user manual online this is the error message. ( My Outpost Security Suite 7.1 Free is ON.)
Execution error for procedure 'plug-in-web-browser': Failed to open '[URL] ....': The operating system denied access to the specified file.
Execution error for 'User Manual Web Site': Error: Procedure execution of plug-in-web-browser failed: Failed to open '[URL]': The operating system denied access to the specified file.
I went to see what the default browser but it only shows "Reg_SZ" in the HKEY_CLASSES_ROOThttpshellopencommand. I want to verify what my default browser is. Isn't that what GIMP will use as the browser? Why does GIMP use the NotePad program to display the user manual when I have the preferences set to local access (on my computer)? The name of the NotePad file is "gimp-concepts-usage".
View 3 Replies
ADVERTISEMENT
Sep 11, 2013
I still consider myself a newby to Gimp and have just downloaded the new 2.8, how I can download a printable version pf the user manual for this?
View 3 Replies
View Related
Oct 24, 2011
How can I install the Gimp user manual in Windows 7?
I have Gimp 2.6.11
View 1 Replies
View Related
Sep 9, 2012
I want to download my pictures back to my computer
View 1 Replies
View Related
Jan 22, 2013
One of our domain users cannot access Autocad 2007LT as a domasin user in Windows 7. As soon as we make him temporary admin it allows him to use it. A pop up box appears asking far administration credentials before he can use autocad. We have tried giving read and write access to the autocad files that we think it links to but this has not worked.
View 3 Replies
View Related
Aug 23, 2012
I have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies
View Related
Jan 24, 2012
I want to point the AutoBackup folder on each local machine, and not all at the same place. For that, I need the Variable that use MaxScript to take the WindowUser and replace it in the configuration.
Rightnow:
C:UsersmyUserAccountDocuments3dsMaxautoback
Later:
C:UsersWindowUserAccountDocuments3dsMaxautoback
I've tried the relative path, but it doesn't work properly
View 1 Replies
View Related
Mar 16, 2012
We have a bunch of cad files that are loaded onto a sharepoint. Some these users who have read access only are having difficulties opening the files in autocad LT 2012 because .dwl and .dwl2 files trying to be created on the sharepoint site. Is there a way to redirect these files to their locally to their computer? I would like to avoid giving the users write permissions to the site.
View 1 Replies
View Related
May 16, 2013
Is there a folder/file where illustrator stores unsaved/recovered documents that I can open/run manually?
View 1 Replies
View Related
Aug 17, 2011
how I can print the manual, also how do I download the manual into the program…I downloaded the zip file opened it with 7 Zip but couldn’t get it to work…I lost my Photoshop 4.0 when my computer crashed and a friend told me your program is much better and free…on my very limited budget that was good news, but I do need to print the manual because I have difficulty reading things on the computer.
View 2 Replies
View Related
Oct 21, 2013
I'm a paleontology student and in my work I have to create reconstructions and pictures of fossils, most of them stippled (similar to URL..... I used to work with Gimp 2.6, using paintbrush fading set to 1 px (i.e. every click of a mouse making one, perfect dot). I'm using a mouse, because I find it more comfortable and precise than a graphic tablet. Unfortunately, after Gimp update to 2.8 the brush options changed, the brush fading ceased to work as it used to, and I can't find a way to turn it on (tweaking the dynamics settings would probably work for a tablet, but I find it useless for a mouse). I know there are some plugins for automatic stippling/halftoning, but unfortunately they are not what I want, as they obviously mix information about shape (shading) and color, while I need my pictures to show only the shape of the specimens. Is there any way to make the paintbrush fading work in Gimp 2.8 as it worked in Gimp 2.6?
View 6 Replies
View Related
Aug 20, 2012
We have a shared computer that a few co-workers all use C3D on. We each copied some clients standards to various C drive locations including some C:<user> folders. One user suddenly expierenced very slow opening of C3D (noted it kinda would stick at one of the Aecc...loading file) and once it opened, could not open a C3D file (alignment, profile, corridor type dwg). A small file with only text and no C3D files would open.
Other users could open these C3D files on the computer using their login, no slowness.
I realize this is vague and near impossible to pinpoint. I wonder if a Uninstall/Reinstall is a likely solution. This may require copying standard files again (a real pain).
View 1 Replies
View Related
Apr 26, 2011
I want to know if I can get a compacted guide into quickly and effectively save all my autocad settings in a computer to be used elsewhere.
My personal settings include:
1. alias
2. autolisp that are loaded in the cui
3. an escape autolisp that is part of the right click context edit menu
4. re-arrangement of short cut menu (i.e addition of dimension linear, dimension aligned, plot)
5. new menu with new macros
6. option profiles
7. plot styles
8. hatches
9. libraries of block
10. palette
11. workspace
I know the list is long and can be longer and most of the time as I switch from one computer to another, there is the same repetitive task of copying, resettings and so on. Are there any effective way to transform an autocad post with all my settings at once, that effectively save all the settings and the files and the blocks and templates and effectively load all of them onto a new working post.
Somewhere it looks impossible, at least in its totality but who knows this may be possible.
View 7 Replies
View Related
May 1, 2013
How do I transfer user-defined actions on Photoshop CS5 from an old computer to a new computer? I cannot find the .atn files on my computer. My computer uses Windows 7 32 bit.
View 3 Replies
View Related
Jul 20, 2012
I like to put a border on the photo I upload online.These pictures are usually 600 X 400 pixels.A 2 pixels line is just perfect for my use but...it's impossible to have a 2 pixels pencil.You can create a 1 pixels pencil or a 3 pixels pencil but not a 2 pixels one. Why?
At one point, what I was doing is, select all,then shrink the selection by 5 pixels(yes,I like to add the border inside the image)and then use the marching ants as a guide and trace a 3 pixels wide solid line and then erase a 1 pixel line using the eraser but...it's extremely tricky(and time consuming)because there's no real 1 pixel eraser...it's a cross made of 5 pixels and if you're not just at the right spot it erases the thing just bad.
Also,I use to do it by: selecting all, then shrink the selection by 5 pixels and then strike the selection with my chosen pencil but...the damn line is 5 pixels away from the border of the picture on the left side and on top but on the right side and at the bottom,the damn line is only "4 pixels" away.Sure 1 pixel off seems not that much but on a small picture 600 X 400, it shows a lot. How come the selection can't be stricken with an even result?
View 14 Replies
View Related
Jan 6, 2012
I am using Ilogic to complete details in the drawing iproperties to use in a drawing border.
I can successfully enter the creation date with the line:- iProperties.Value("Project", "Creation Date") = NowÂ
But is there a way of doing the same so that the iProperties.Value("Summary", "Author")Â =Â Â computer user ?
View 2 Replies
View Related
May 5, 2013
My (previously wonderful) local adjustment brush has apparently quit working. Whenever I attempt to make local adjustments - using either the standard presets or custom settings - all the adjustments made are applied to the entire image, not just locally. Density and flow are set to my typical values and Show Selected Mask Overlay shows the extent of the applied effect, but whatever adjustment I make is applied generally, over the entire photo, rather than to the selected adjustment area.Â
View 8 Replies
View Related
Feb 2, 2006
The act of opening the CHM file is no problem from VBA. However, this particular routine does not use a dialog box, only a "select objects" prompt. I want to allow the user to press "F1" or "'HELP" at this point and have it open my CHM file.
In lisp, you can use (setfunhelp) to do this.
So in theory, if the VBA sub is called like this:
(defun c:foo ()(vl-vbaload "c:/program files/
directory>/sample/vba/drawline.dvb"))
...then the lisp function should work, but it doesn't. Pressing "F1" or "'HELP" during the vba routine, simply opens the AutoCAD HELP to the default page.
View 9 Replies
View Related
Sep 28, 2013
Just upgraded my office computer and reinstalled Illustrator CS6 - now my home computer won't open Illus CS6 get activation message: "...already in use by max 2 computers" - but it's not.
View 1 Replies
View Related
Oct 7, 2011
I would like to open the autocad leaving invisible to the User.
I did it:
acadApplication = new ACAD.AcadApplication();
acadApplication.Visible = false;
But it did not work!
View 2 Replies
View Related
Jan 26, 2009
Recently the user had crashed his system. So I had to role out a new system for this user, CS3 is part of the image, but Photoshop can not open PSD files unless I run as Administrator(s).
View 3 Replies
View Related
Nov 24, 2013
Trying to download Ps & Bridge & keep getting error message that I must close Bride first. Bridge is not open on my computer.
View 1 Replies
View Related
Jul 25, 2009
my Photoshop will not open or load at all and my computer will not let me reinstall, I click the icon and nothing happens ..
View 7 Replies
View Related
Jul 15, 2013
I recently purchased a new iMac and transferred all my software to it from my old computer. Photoshop elements will not open. The dialog box says "Check with the developer to make sure Adobe Photoshop elements Editor works with this version of OS X. you may need to reinstall the application. Be sure to install any available updates for the application and OS X."
Â
My version is 10.8.4. The "Read Me" file says it requires 10.6 through 10.8.Â
Â
So I attempted to uninstall it and reinstall.When I tried to uninstall I got a message that said it could not be uninstalled due to an error. I followed the directions to restart and try again... and again. Same message. At the bottom of the message was another saying if that didn't work to use a link to some Adobe "cleaner". When I clicked to download the "cleaner" I got a message that I had to UNINSTALL the Elements program before using it.
Â
Next I tried to install Elements from the original disk and got this message: "Installation to case-sensitive drives is not supported. Please choose a different drive location to install." I just want to do a photo project as a gift for my parents.Â
View 1 Replies
View Related
Nov 26, 2012
My LR is currently only showing the photo folder. I have forgotten how to make it show all the folders on my computer and the external hard drive. What is the command to toggle back and forward?
View 2 Replies
View Related
Jan 5, 2012
I know this has to do with the users network profile because it is only happening to a few people. I just upgraded all of our workstations to New Win7 boxes running IV2012 products. Everybody is working well except a couple of people.
View 2 Replies
View Related
Nov 8, 2012
Cannot open an ipt or a dwg template from Vault. When he attempts to open it he sees a warning, Unexpected Error . He's able to open the iam template from Vault though.3 other people access Vault and aren't having any issues opening the same templates.
We are using Inventor 2013 and Vault Professional 2013, with Windows XP.
View 1 Replies
View Related
Aug 11, 2011
Often when I open a project I ahve been woking on alone I get the following message:
Â
"This file is already open for editing by another user.  You will be unable to save   any changes before that user closes the file."
Â
Since I am working on the project alone there are no other users who could have the file open. Â I don't know why I'm getting this message.
View 1 Replies
View Related
Sep 28, 2012
Is there any way to take the settings for one user (windowed mode enabled and toolbar layout) and apply those to all users who then log in to the computer afterwards?
The setup for one user is not carrying over for all users. Is there a way to configure GIMP so that my changes affect all users.
View 4 Replies
View Related
Jan 30, 2013
I just transferred cs5 to my new imac computer using my time machine backup. I now get a "photoshop does not recognize this file type" when I try to open a raw file from Photoshop. When I try to open my raw files through bridge I get the message "you do not have permission to open the document. I have checked my permission preferences and have reading and writing permissions and updated to 6.7 ACR.
View 13 Replies
View Related
Nov 20, 2012
I have shot some moving footage with a Canon D5 MkIII. The computer has Adobe CS6 installed. However the computer is not allowing me to open the files.
View 2 Replies
View Related
