CorelDRAW X6 :: Text On Curved Surface?
Oct 1, 2012Working on a drawing of a rocket. I would like to know how to alter text so it looks like its on a curved surface. The high point will be the center-line of the text.
View 1 Replies
ADVERTISEMENT
CorelDRAW X5 :: Creating Label For Cup Or Curved Surface?
Dec 3, 2010I need to make a label for a cup but haven't been able to. how to do it (theoretically), I don't how how / if I can use CorelDRAW to do it. I have included the video I used to find out how to do but it uses a different program that uses a "mould tool". Is there a tool that does the same thing on CorelDRAW?
[URL]
AutoCAD 2010 :: Adding Text To Curved 3D Surface
Apr 18, 2012How to add text and fit/emboss it to a curved 3D surface.
I have a college assignment to draw a jug and add the word jug onto the side, but i cannot find anywhere to be able to acheive this.
I am running AutoCAD 2012.
AutoCAD Inventor :: Extrude To Curved But Without Curved Resulting Surface?
Aug 6, 2012I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies View RelatedAutoCAD Inventor :: Curved Surface - How To Increase Volume Of Surface At Certain Points Only
Apr 10, 2013how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
AutoCad 3D :: How To Put Planar Surface To Solid Object Which Surface Is Curved Like Cylinder
Sep 2, 2013I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedAutoCAD Inventor :: Ribs On Curved Surface / Trimming To Complex Surface
Feb 28, 2013I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
AutoCad 3D :: Make Curved Surface A Flat Surface?
Oct 19, 2011If you look in the attached PDF, I have an elliptical wall that also has changes in elevation. call it a compound radius if you will. What I have to do is to make a wall cap to go on top of the wall. I know, sounds fun.....I have the surface on the right of the PDF and i need to figure out how i can take that shape and have it lay flat so that i can cut this shape out on my CNC. i know I can use the FLATSHOT command, but this will not give me the true shape of the board.
View 4 Replies View RelatedCorelDRAW X3 :: Text Orientation - Curved On Bottom And Flat On Top
Apr 19, 2012How do I make my text curved on the bottom and flat on top? I have used the fit to path feature for the bottom curve, but I need the top of the word to stay flat.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Top Line Of Curved Text Missing - Export Logo To PNG Or JPG
Nov 1, 2011I'm having problems exporting a logo to a png or jpg the top line of curved text (MWW) keeps disappearing. It's probably really simple, but damn its annoying. File is on rapid share [URL ...
View 5 Replies View RelatedCorelDRAW Graphics Suite X6 :: Stretching Text Or Graphic To Wrap Around Front Of Curved Object
Sep 5, 2013I'm trying to wrap an image around a curved object. This is a front elevation of a sign I am attempting to render and the sign wraps around a pole. What I am attempting to do is not just "squeeze" the copy but actually attempt to show what the image will look like if you are looking directly at it which means that the closest portion of the image will look normal but as you look further out towards the edges then the graphic and copy would appear to merge and disappear backwards. I hope I am explaining this well. I am trying to wrap my brain around this concept. I know you can do this in photoshop with stretching but cannot fathom how I can attempt this in CorelDraw or Illustrator.
View 14 Replies View RelatedAutoCad 3D :: How To Draw On A Curved Surface
Nov 27, 2013So I need a starting point on how to draw on a curved surface.
[URL]
how to draw the "slot" I know in solid works i can "project" onto the surface and then so a cut.
AutoCad 3D :: Export Curved Surface From 3DS MAX
Jun 13, 2011I have a curved surface and I don't know a right way to export it. If it like Editable Poly then I have a mesh in DWG. Then I set to Faceted and optimized then merge faces (to receive one face) and then convert to surface but after that I have a surface with multiple triangles. This is one way which I use, I tried many ways but I have the same results.
This is what I have after export from 3DS MAX (same as DWG, SAT, IGS)
02_old.jpg
This is what I receive from splines and loft in AUTOCAD.
02_new.jpg
AutoCAD Inventor :: Loft To Curved Surface
Nov 7, 2009I'm loft retarded. What I did here was loft to a tangent work plane, then did a sketch on the top surface and extruded the shape that I want. There has to be a better & easier way.
View 9 Replies View RelatedAutoCAD 2013 :: Extruding Curved 2D Surface
Dec 13, 2012Is it possible to extrude a curved 2D surface to give it thickness? For example, if you were to draw a loop the loop shape but it was just flat, could you extrude it out to give it thickness?
View 5 Replies View RelatedAutoCAD Inventor :: Holes In Curved Surface
Sep 30, 2013Basically I’m trying to create a circular cut in a flat pattern for a hole made in a rolled piece of sheet metal.
I have created a "case" (this is what we call it) to mount an axial fan, it will require holes for mounting the motor plate. When I create these holes in the rolled case assembly they appear to be fine, but when I flatten it they are turned into two sets of semi-circles or ellipses.
This is only a problem when we run the parts on our Laser; the laser will attempt to start the cutting at the end of each of these "semi-circles" causing a hotspot where the two semi circles meet. This causes the hole to be slightly smaller than intended in this area causing great difficulty inserting bolts, they normally require drilling.
Our material thicknesses vary from about 3mm to 8mm.
I’ve included a crude example of what I’m trying to achieve. To really see what I mean, place the file into a Drawing file and zoom into the hole. I couldn't add the file, with only 3 features the file was 5mb in size.
By the way, I have a temporary solution, it's just a little complicated. (My solution: use square holes first in the un-flat, use the diagonal lines from each corner of the square in a sketch on the flat pattern to place a circular cut on its mid points.)
Intel Xeon 3.0GHz (4 Cores)
nVidia Quadro 2000 (1GB) - Dual Screen
8GB RAM
AutoCAD Inventor :: Extruding Through Curved Surface
Jul 8, 2013I have tried, such as creating lines in a 3D sketch and projecting the geometry to surface, and creating a work plane, and both don't seem to work for me.... I'm trying to cut out a 5.8mmx14mm rectangle out of a cylinder. When I project the geometry to the cylinder's inner surface, I cannot trim the solid in order to extrude. I've attached the file.
View 9 Replies View RelatedAutoCAD 2013 :: Possible To Hatch On A curved Surface?
Aug 8, 2012Is it possible to hatch on a curved surface?
View 4 Replies View Related3ds Max Modeling :: Simple Way Of Creating Curved Surface?
Apr 1, 2011I've been working on creating a sword in 3D Max for the last couple of days and have run across a problem. At the base of the blade, it goes up straight for about an inch and then tapers out and up another half inch in a curve.From there, the blade tapers/curves back in, then out once more to create a thicker end of the blade, width wise. I need to know a simple way of doing those curves. A friend of mine suggested using quick loops, then individually scaling them to get the curving effect. That just seemed like it took too much time to me, and I thought there must be a simpler way. I tried adding a taper modifier to the selected area, but that didn't really seem to do much, except give the opposite effect that I wanted.
View 4 Replies View RelatedRevit :: Apply Decal On Curved Surface?
Apr 10, 2013Is it possible to apply a decal to a curved surface? I need to place an image on a wrapping projector screen. When I try to place the decal, it only will choose 1 of the arcs or one of the straight peices. I need the one decal to stretch over the entire projector screen. I have attached a screen shot so you can see what I am trying to achieve.
View 3 Replies View RelatedAutoCad 3D :: Mapping 2D Drawing Onto 3D Curved Surface
Nov 25, 2011I'm using AutoCad 2007. I'm trying to map a simple 2D flat drawing onto a curved surface.
I have a 3D drawing of a very simple curved floor, similar to a skateboard ramp or a photographers infinity curve backdrop. I also have a 2D design. I simply want to drop my 2D drawing onto this curve, so that it follows the geometry of the curve's surface.
AutoCad 3D :: How To Draw A Circle On A Curved Surface
Apr 30, 2013i wants to draw a circle on a cylinder's surface[3D curved surface]. And that circle should be co-planer with the cylindrical surface.
View 7 Replies View RelatedAutoCAD Inventor :: Extrude Around A Curved Surface
Apr 27, 2012I have a cylinder that has for lack of a better word, a zig zaged slot milled into the outside of it thru to the bore. I am unsure how to go about drawing this so I can get it to extrude correctly around the part.
From other cad software history, I could draw it on a straight plane and tell it wrap around the part of whatever diameter. But, since I have not attempted this in Inventor I don't know if this exists.
Just for reference, this is a twist lock device. Turn the cylinder, advance a key the is inside the zig zag advancing or retracting the part that is inside the bore attached to said key.
Photoshop :: Wrap Image On Curved Surface Like Cylinder?
Nov 14, 2013I want to wrap label on the cylindrical shape object.
[URL]
AutoCAD Inventor :: Flattening Part Of Curved Surface?
Dec 22, 2012I am trying to design a new mold for some sailing rudders I am building. The files I have for the current molds are in the IGS format, which Inventor can open. The current rudders are convex going from the widest part of the foil down to the trailing edge. The goal is to create another model with this flattened. If I were doing this in logic it would be: Find max height, alter foil to be straight from max height to trailing edge. I have tried everything I can do to make this happen with no avail. what would be optimal is if I could get it set up so that I can easily control the amount of convexness to the aft section, but the primary goal is to just get it to be straight. The trailing edge is the straighter one.
The final goal is to export to g-code and send off to a cnc.
I have attached the files after I have imported them into autodesk, but below is a link to the original iges files.
[URL]
AutoCAD Inventor :: Creating Hole On Curved Surface?
Oct 29, 2012I am trying to create a simple hole with threads for a set screw on a hub. I cannot figure out how to select the tangent plane I need to create the sketch. I'm using Inventor 2013 and have attached the file below.
View 9 Replies View RelatedAutoCAD Inventor :: Draw Ribs On Curved Surface
May 24, 2012How do I draw ribs on a curved surface. Attached is model that I am working on and I need to create ribs on the curved surface in radial direction. How do I do it?
View 8 Replies View RelatedAutoCAD Inventor :: Plane Tangent To Curved Surface?
Oct 2, 2012I'm designing a part, and am having trouble creating a plane tangent to a curved surface. One option for creating a plane says "Tangent to Surface through Point", which in theory I should be able to use, but I can't figure out how to actually place a point there before in order to create a surface at the point.
Basically I am trying to cut a circle into the curved right side of the part
I've attached the part file for reference.
Revit :: Lines Along Curved Surface In Family Editor
May 17, 2013I have an extrusion with a profile consisting of two offset arcs. This results in a curved surface.
I want to show a line in 2.5" from the top, bottom, and start and end edges of the curve. What I've done to accomplish this is to create two reference planes, one 2.5" down from the top of the extrusion, and another 2.5" from the bottom.
For the vertical lines, I then have to create a reference plane that is a chord of the arc of the surface, where the plane intersects the outer surface 2.5" from the edge on each side.
I have some other items that are being drawn on this curved surface, and to be honest, that's a bit of a pain. Am I missing some easier way to accomplish this?
If this was a project file, all sorts of options, but I'm not finding any in the family editor.
AutoCad 3D :: Warped Image When Rendering On A Curved Surface?
Jun 1, 2012I do a ton of rendering for my work. We have many curved surfaces within our product line. My problem is that, A lot of times my materials (jpeg's) warp and blur when added to a curve. My guess is it has something to do with the UCS orientation because if i rotate the curve to be parralell with the current UCS, the material shows up how it should, Until i change the UCS back to world.
Same Image material, Surface on left is curved and surface on right is flat. Warp.jpg
AutoCAD Inventor :: Show Fillet Welds Between Bar And Curved Surface?
Mar 23, 2012 I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.