During the Auto-backup, the document failed to save in the background.
I can't do anything about it.If I try to close the document, it'll prompt me to save it, leading to the same failure.
So I can only quit CorelDraw without saving the document. And if I reopen the same file, same thing happens.So I end up recreating everything.
It only happen to the particular file and not others.
I have recently dowloaded the 2012 revit software. I am trying to open a new document to start a new project and when I click on it, a window pops up saying 'failed to open document.'
View 9 Replies View RelatedThe following code produces a run time error:
"Failed to get the Document object"
Public AcadApp As AcadApplication, AcadDoc As AcadDocument
Set AcadDoc = AcadApp.ActiveDocument
AcadApp.ActiveDocument = AcadDoc
why?
I received a nice cd from usa with loads of actions and their corresponding filters - the problem comes when I load up the action, run it and it asks for the corresponding filter -
I browse to the filter folder, choose a filter and click ok.
Photoshop then gives me the following error:
Could not place the document because PDFL initialization failed?
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View RelatedI'm having trouble with iParts. This specific part is for a component that has many dimensions that vary from size to size, for a total of 23 configurations, 9 inch, and 14 metric. I did not have this problem until today... when trying to work with the iAssembly that uses two iParts (by means of selecting which Part Factory Member is used in each Assembly Factory Member).
I know that if the files are read-only, the files will fail to generate. I have checked this, was still having trouble, and so I deleted the files. The problem persists.
All the members compute successfully and there are no empty cells when editing the table. The filenames are just letters/numbers and dashes, no spaces.
The assemblies and parts had been generated and checked into vault, but only now problems exist, only for the newer parts, which happen to be the metric parts.
Original file was generated in Adobe InDesign CS6 as (16) 8.5" x 11" - exported this to high res print ready PDF. I need to manually paginate this 16 page document to 11" x 17" printer spreads so I can set up addressing with XMPie.Placed PDFs into InDesign CC (vsn 9.2) on (8) 11" x 17" sheets - saved as a new file name but it won't save - it looks like it's processing for a minute, then just stops and doesn't save.
Made an 8 page 11" x 17" template without placing the PDF and saved it - and it saved successfully. Once I place the PDFs - and try to save or save as - it does the same thing, processes for a moment before stopping and not successfully saving (the * is still next to the name at the top of the document bar, and if I close it asks me if I want to save changes.)I'm on a Mac, OS/X 10.8.5, I've restarted the machine, and tried again and ended up with the same issue.
in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 7 Replies View RelatedWhen I'm in Corel Draw, I've imported a picture, converted the picture to bitmap and go to edit bitmap in Corel Paint it says FAILED TO LAUNCH SERVER APPLICATION.
View 1 Replies View RelatedIllustrator keeps quitting even when I save a new Illustrator document, it quits when reopening it.
View 5 Replies View RelatedWe can save the Ai Document as PDF through :
1. Save As -> PDF
2. File -> Scripts -> SaveDocsAsPDF
But I have a case where I need to save document through my plugin.Can we save the currently open document as a PDF file using the CS6 SDK ?
I need to save a CS6 document to open in CS5.5.
View 6 Replies View RelatedURL.... "Failed to launch server application" when trying to edit a bitmap out of CorelDraw, only later saw that specific post was for X3. I have the same trouble, only with X4.
To recap my problem: When calling the "edit bitmap" function in X4 - I receive this message: "Failed to launch server application". Paint opens, closes, opens, closes and then the message pops up.
I tested several files, different bitmaps, different dpi's, new files with newly converted bitmaps (filled rectangle to bitmap). To no avail.
I have a working document, part of which should become a template for similar docs.
However the part that should become a template is not all that is in the document.
I guess I can turn off the eyeball of all layers or objects not meant to be part of the template but then the template will have all the extra junk in it (turned off).
Is there a better way than saving a copy of the doc, opening it and deleting all that is not meant to be template, then resave as template?
I can't get my document to save a PDF with the bleed area, it shows the cropmarks but not bleed area. Also in my Object tab I do not have the option of Crop area.
View 3 Replies View RelatedI have a document which has has a non-square pixel ratio thus requires pixel aspect ratio correction to be turned on to view the image correctly.
I want to save it as a JPEG for use online however I cant find an option anywhere to make the saved file have the corrected aspect ratio.
Essentially when I save the file as a JPEG (or any end format) the image is squished. How can I save the file not squished? (i.e. burn in the ratio correction)
If I uncheck the 'maximum compatibility' mode, the file size is 48.7MB. If the 'maximum compatibility' is checked, then it cannot save the document at all giving me an error message about it being larger than 2 GB.
I need to send this file into a printer and I cannot guarantee what version of photshop they are using, so I want maximum compatibility to make sure they can open it.
I'm working on a large tradeshow booth design. It was suggested that if my computer can handle it, to work at scale (120 " X 90") at 150dpi. So I am.
I am nearly finished designing and now Photoshop 7 is giving me an error:
"Cannot save file...the document size exceeds 2G." Or words to that effect.
The document window tells me that the file is 970 MB, less than a Gig.
I've purged all hidden layers to reduce the overall files size. No go.
I removed the last image I had in the design, which used outer glow effect, and now the file will save.
I purchased Designer Pro 9 about a month ago. I have tried about 30 times, no kidding, to change the US Letter template from Arial 10 to Verdana 12. It happened again this morning and I've decided to finally come to the forum and find out what's going on.
Here's what happens: I open US Letter and make the changes, then choose Save Template. When I reopen it, it's still Arial 10. Makes no difference if I choose "Use as default template" or not. I even tried saving it as a template with a different name, Verdana 12, but it still opens as Arial 10.
As a test, I opened Designer 6, chose New, US Letter, and changed the font to Brussels 12. I then selected Save Template, saved it as Brussels 12, and closed out. Then I chose File/New/Brussels 12. It opened as a letter template with Brussels 12 point. That's the procedure I used years ago to change US Letter to Verdana 12 in Designer 6, and so the Save Template function still works in that version.
Because nothing I've tried seems to work, I am wondering whether any template I create will be saved in 9.
I recently u[graded from a very old Illustrator version to CS6 and I noticed the crop tool is missing. It used to be really easy in the old version to drag the crop tool around the area in question and crop marks would be generated automatically. Then I could save and print just that area only. Now this tool is gone and I am having trouble with finding a way to define the area I want to save or print. When i generate crop marks and then save, all i get is a file with plenty of white around it that also shows the crop marks....
View 2 Replies View RelatedI am working on a plugin application, in that saving Image files on a specific location by using JSX file.I have done with that but it works only with local drive.I want to save that file on my Network Share by using JSX.
View 10 Replies View RelatedFor the last few weeks everytime I'm working on a document in illustrator cs6 that includes paths, I go to save it and it freezes, I try and copy it and it freezes.
I've got an Intel Core Processor @ 2.00GHZ and 8.00GB RAM, I don't have any other program open at the same time so I don't know why this keeps happening.
complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
Basically I am making a new pattern of stars, so I created a 1000 by 1000 document, filled with black, added noise, then added an adjustment layer to thin out the noise and make it look like stars in space. It looks great!
How to save it without the effect changing. I tried flattening the image, and it messed up how I wanted it to look. I tried merging visible, that didn't work. I tried just saving it as a PNG, like I do with all my projects, but that didn't work. And defining a pattern did the exact same thing. I just want to have what I physically see on the screen save as is so I can use it with other things.
I am running cs6 on both PC and Mac. On my pc if I save a Photoshop file on it as a save as, it does not open the file immediately. I have to close the original file, find the file then open it. Very time consuming and also confusing if you are working fast. On my Mac if i save a document in Photoshop, doing a save as, it saves the doc, and opens it right there and you just continue to work.
View 7 Replies View RelatedI have a problem. I use AutoCAD 2010. I want to know the use click save or discard button when close the document. I know the "Saved" Property of AcadDocument can tell me the result. However, I could not use the AcadDocument Class. Because there is another plug-in, when i use the com class just like AcadDocument , it will tell some error.so i only can use .net Class just like Document. Is there any Proprty to get it ?
View 3 Replies View Relatedin fact didn't know I had the time to be either.Creative Cloud is a great idea, pity it has been used to release under cooked software. The upgrade to CC has cost my department hours and hours of chargeable/billable time.URL....
View 1 Replies View RelatedIs there any chance to assign values to an artboard?
I've experimented with “tags”, but they only work for pageItems. (if the item which includes the stored data is deleted, the data is also deleted)
It is simple data like v1=true, v2=false, … I want to assign. And it needs to be saved within the illustrator document.
I have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedI use Photoshop to design interfaces and then cut down the graphics, by using the rectangular marquee tool and selecting the area that I want to save, copy-merged and then paste into a new document, of the correct canvas size according to the selection area, and then save for web..I end up with dozens of open windows all "Untitled" something, unsaved.
All I want is being able to select an area in my document using the marquee tool and then select from File a save function like "Save selection for web and devices...".
Perhapse this option could be in the "Save for web and devices.." dialog, where you could select from a dropdown the following:
"Entire document" (default)
"The entire selected area"
"Trimmed down selected area"
How do I copy a picture from a Word document and save it as an image file?
View 1 Replies View Related