CorelDRAW X6 :: 64bit Kills Print Spooler?
Dec 27, 2012
This problem has come and gone and come again, so it may be windows related, but only has issues with CorelDRAW X6System runs fine and prints from windows and even CorelDRAW X4, but as soon as you start CorelDRAW X6 and create or open a document, the spooler stops and you cannot print. If you just open CorelDRAW X6 everything is fine.
Error in the even logs is generic... "The Print Spooler service terminated unexpectedly."
Printers are network attached and have been in use for years with no problems.
View 9 Replies
ADVERTISEMENT
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Jan 19, 2013
Upgraded OS from W7 (64bit) to W8.
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Have uninstalled and reinstalled the driver w/o success.
View 4 Replies
View Related
Jan 3, 2012
It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
View 24 Replies
View Related
Mar 6, 2012
Corel Draw X5 does not work on Windows 8/64bit Consumer Preview.
View 12 Replies
View Related
Jul 14, 2013
Just installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies
View Related
May 2, 2012
CorelDraw X6 quits responding when trying to import Acad drawing (vectors). To try to get around this I opened the DWG with CorelDraw X6 instead of importing. Then saved as a CDR and then tried to import the CDR. CorelDraw X6 quit responding again.
Note* Tested with CorelDraw 5 and it worked without problems.
View 4 Replies
View Related
Jul 11, 2012
In Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
View 13 Replies
View Related
Mar 18, 2011
We reinstalled Windows 7 64bit to Windows 7 32bit and now all previously created Corel Draw X5 files in Win 7 64bit did not show correct fonts in Win 7 32 bit. All fonts are installed.
View 2 Replies
View Related
Dec 14, 2012
I want to install ColorDRAW graphics X6 on an Windows 64 BIT computer.
We know that is officially not supported. But is there a workarround available ?If already tried to run in it in compatibility mode on an account with admin rights.That doesn't work.I get an error during the installation:Microsoft Visual Basic for applications 7.1 is not supported.
View 3 Replies
View Related
Aug 14, 2011
The license agreement is blank. I'm stuck. Been fighting it for a couple of days and I've hit a wall.
View 5 Replies
View Related
Mar 17, 2012
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
View 8 Replies
View Related
Jun 8, 2012
When using the standard type tool, periodically, the keyboard arrow keys will not work. You can manually change your selection point, but not by using the left of right arrow.
View 8 Replies
View Related
Jun 27, 2012
I've just recently found that new chromatic aberration tools kills settings for old chromatic aberration tools. Lets say I have a PV2010 photo with adjusted sliders for chromatic aberration reduction and selected defringe "all edges".Now I'm importing this photo to LR 4.1. I'm not updating process version!
Photo is automatically updated by Lightroom to new CA controls (note it still PV2010 photo). Well, I must say the the results are superb - they are the same as I was achieving with manual sliders, but now with only one click. But the problem is - Lightroom says that metadata have been changed, and I am writing back changes to XMP.But now XMP contains settings for new CA tools, but settings for old CA tools are LOST.
So if I want to open this image in ACR 6.6, or send it to someone with older LR version I end up with completely resetted CA settings, because ACR 6.6 does not have new CA tools, and settings for old tools are killed by LR 4.1 - they are just removed from XMP. So I am loosing CA removal settings completely when opening image in earlier version of application. And I am NOT updating process version!
View 11 Replies
View Related
Apr 8, 2013
I notice that if I use the CS6 feature of holding down the shift key while pickwhipping a new parent (to get the child to move to the parent), it deletes any keyframes I have set (position,scale,rotation). Is this normal behavior?
View 1 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Apr 14, 2012
i'm running on WIndows XP X64 SP3 AMD ATHLON II 64 - Mem 4Gb), i had install .net framework 4 and i've tried to install Corel Draw X6 64 bit on my system but the screen always shown the warning message "your system has been not modified, the processor in your computer does not meet the minimum system requirement". Is it because of Windows XP x64 or the processor?
View 7 Replies
View Related
Apr 2, 2013
When I have a raster image power clipped into a vector frame and I attempt to trim that power clipped image. Corel locks up.
View 15 Replies
View Related
May 2, 2012
I've upgraded to CorelDraw X6 but I need the files I make to be openable in Coreldraw 10. When saving I use the drop down box and choose the option for 10 and if they are opened again in X6 before they are opened in 10 they are fine, but when these files are opened in 10 they crash and the file gets wiped (when opened again it's just a blank page).
A not so obvious box that needs ticking? An option I have missed somewhere?
Is it because the version i have is 64bit? Or is it just not possible to downsave files properly anymore, is 10 just too old now?
View 11 Replies
View Related
Mar 26, 2012
Is X6 64 bit supposed to save in the background? It seems to do it sometimes but I'm usually seeing the hourglass especially after exporting in X5 format. I have 24GB of ram so that shouldn't be an issue.
View 3 Replies
View Related
Jun 18, 2013
I've been trying to get W7-64 to display X5 thumbnails. I've been trying for months. My efforts have brought me to:
Have you tried this?
Have you tried that?
Have you tried Mystic Thumbs?
It's Microsoft's fault
The best I can do is a kluge I don't want to live with. I've been a Corel user for 20 years. Much as I am attached to the program, this makes it virtually unusable. I work with a ton of files. I need to be able to see what they are before opening them.
I'm disappointed to see this problem has been going on for a number of years. It gives me the feeling the good people who built Corel are all gone now, and pride in the product went with them.
I'd love to learn the real honest-to-goodness Corel fix is jist around the corner, but I can't even find an official Corel position on this issue. Is there one? other than
The problem does not exist
The problem is the user's fault
The problem is Microsoft's fault
View 14 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Nov 19, 2013
I've been having this problem for a while with Photoshop and my Wacom pen...
I'll be painting and I'll bump the middle button on my wacom pen and I'll get the circle of circles that spins forever... until I force quit. It's so cumbersome. I have my middle button mapped to the middle mouse click.
I use a mac and currently on CC. I have an intuos 5 but It used to happen to my three too. It's been less of a problem lately because of the crash recovery feature but it's still a huge problem...Like if there was an auto save feature or something then I'd be less frustrated.
I seem to have trouble articulating what's going on as well because all I get back is... did you update the drivers? it must be a wacom issue. try an update... etc.
The wheel spins but the pen still draws... like... FML
View 1 Replies
View Related
Feb 24, 2012
In the engineering notebook, I have sectioned the assembly so that I can show what I need to note. I would like to freeze the view. When I freeze the view, the section goes away and I cant see what I need to.
View 4 Replies
View Related
Sep 17, 2013
Twain driver for the Corel X6 suite that will woked with the HP Officejet 6500 e709n?
View 2 Replies
View Related
Mar 2, 2013
Adjusted to the active object layer top / below forward / after layer.The active layer is adjusted to page top / below, forward / after layer.
View 4 Replies
View Related
Nov 15, 2012
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
View 4 Replies
View Related
Feb 26, 2013
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
View 7 Replies
View Related
Sep 4, 2013
I have CorelDraw X4... I created a design like I always do, but I can't print. All the "Print" options are grayed out and won't let me use them.
View 4 Replies
View Related
Feb 18, 2013
I am working with Corel Draw X5, Version 15.2.0.626 on a Windows 7 PC which is connected via Novell IPrint to a Conica minolta Bizhub C280 and A HP Offic Jet 850. On both printers I have noticed that a 1:1 print shows differences in scale to the sketch I have made at Corel Draw. As an example I have created a cm scale of 40cm with lines in cm and mm distance. Then I have printed it on both printers and I noticed that at the 28cm position the printed scale is only 27.95cm long. This error occurs on both printers. I have tried to create a CAD drill diagram but because of these large errors I will get holes on the wrong position. This diagram uses distances of 35 cm and here the error is nearly one millimeter.
View 1 Replies
View Related
Jul 3, 2012
I can't convince my Corel Draw X6 to print in color. Even the print preview is in B&W. I've been using Draw since version 8 and I never encountered this problem before. Do I reinstall my printer's driver? I upgraded to X6 only recently - did I miss something in printing setup?
View 6 Replies
View Related
