we updated from corel 14 with smart designer to corel 15 with smart designer 4.5. Corel is crashing almost continually and is running slow. it is on a dell workstation running a xeon processor W 3503 @2.4 GHZ with 4 gig of RAM with windows 7 professional with service pack 1 32 bit system. We have defraged the system, ran a registry cleaner, rebooted etc..
View 1 Replies
I have a 1 hour long project. Nothing too complicated. There are about 20 smart sound clips, no clip longer than about 4 minutes. If I disable the Smart Sound track, the project renders correctly. If I enable the smart sound track, I get a crash at about 95% along the render. If I select smaller portions of the project, say 15 minutes of it. It might render. Sometimes yes, some times a crash at 95%. what I can do to fix the crashing with smart sounds?
Note, same project on two different machines acts the same way. Reseting VS X6SP1 didn't change a thing.
I understood that Lightroom does not use smart previews as previews in most cases and still uses previews as before for working on. I normally import as standard previews because this improves speed whilst working on them. I have just ticked the smart preview box for a couple of files that I thought I might want to work on after transferring them to my externsl drive and it crashed when set with standard, OK with minimal, I am now wondering if in fact the smart previews are the previews it works on and that by setting it to standard as well it has confused the program and that is why it crashed, but then why have the option of both or is it simply a computer resources issue trying to create both standard and smart previews.
View 6 Replies View RelatedI would like to export my Corel files and parse them myself with C# code for display in Microsoft’s WPF. I've tried this with SVG files with mixed success. Any resource that explains the coordinate system of Corel's SVG export data?
After parsing corel SVG paths, I've noticed some odd behavior. Here are a few things:
The position of a Corel graphic on a page prior to exportation affects the size of the graphic in the SVG file?
I get negative numbers (x y points) in the SVG file when corel numbers are all pos. The x,y values seem to be flipped to y,x values.
I have a large volume of our own clip art that I need to put on line via Microsoft's WPF (windows presentation foundation) all of which is saved in CDR files .
I want to add image file to a cdr file using c# code.
View 4 Replies View RelatedIs there a way to edit the Welcome/Quick Start screen?
I would like to make this:
Look more like this:
except with better artwork. Is this possible? What files do I need to change?
i need to manipulate the text of a field in cdr file(For example:- from 'yogesh' to 'sharma') using c# code....
i know it is something like...
CorelDRAW.Application cdr =
new Application();
cdr.OpenDocument(@"C:UsersuserDesktop500074.cdr", 1);
this will open the cdr file but how should i manipulate text of its fields...
I am using CorelDraw 12. I am trying to automate the Art work generation process using the Interop.CorelDraw Assembly along with C# .Net. I am facing a problem. When I am creating a word object, if the Height of the Text is greater than 21cms the art work is not being generated. It took me a while to understand this. I am not really sure how to remove the size range for the Text.
View 1 Replies View RelatedI am a C# developer and not very familiar with coreldraw(when using with c#). My problem is that i am programmatically importing image on a curve using the following C# code.
d.ActiveLayer.Import(imgpath);// image path is path of the cdr file
var v = d.ActiveShape;
v.SizeHeight = 20.00;
v.SizeWidth = 15.00;
v.AddToPowerClip(s);
Now when i run this code the image gets placed into the curve bit it gets stretched vertically means the face of a student(that comes from imagepath) get stretched vertically..When i do this Manually with scaling and sizing ratio locked it gets properly inserted in curve....
how to convert a frame into an empty text frame using a macro?
View 1 Replies View RelatedI haven't used it since 6.0, but it isn't working for me now. I've noticed a myriad of problems/crashes since windows updated last night (not just corel products). I've got a simple 3000x4000 image I'm trying to grow. It locks up as soon as I change the height number.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
There are a shortcut key for switching from Smart Fill Tool to eyedropper for apply a color and not having to go to the color box to switch to eyedropper? That would be more faster!
View 14 Replies View Relatedbg color of combined shape.jpg
I am creating some geometric patters with the transform tool. Basically a shape is rotated about a center point. When the shapes are combined they create some quick interesting shapes. However, is there a way to fill in the gaps in the combined shape automatically, without having to manually use the smart fill tool?
Breaking the shape apart does not work, because the geometric pattern is based on the overlaps. I included a jpg of what I am doing to circumvent the manual smart fill, but is there an easier way, especially where the geometric patterns become very complex.
I can take the object, trim from a background, break apart that trimmed shape, then color it, or group or shape into a single curve, then align and group with the original object. But just looking to see if there is another easier way.
[URL] I have a corelDraw clipart, there is a white background, and I can't smart fill it wil transparent.
it's CGS06094.crd
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
1. Is there a way for masking each smart filter separately on a single smart object other than nesting one smart object into the another?
2. Is there a way for removing the previously created smart object?
I mean ... let's say I have a smart object containing four layers. Can I remove smart object from these layers?
Why doesnt the smart filter mask move with the smart object?
View 14 Replies View RelatedI keep having the experience that when I run PowerTRACE it says the bitmap is too large and must be reduced to trace. If I click cancel, X5 crashes immediately. If I click reduce it works sometimes and crashes sometimes. I tried tracing some of the same bitmaps in X3 and they worked fine. Is there something I need to change to allow PowerTRACE in X5 to run more smoothly? Is there a way to up the memory allotted to the program?
I'm running XP SP3 with an Intel Core 2 E8400 processor and 4gb of ram (3 of which XP actually knows how to use.) Not the most spectacular setup but it worked fine with X3. I tried adjusting the quality vs. performance option in the PowerTRACE settings but I can tell any difference.
I was recently given a new CorelDRAW X6 update/service pack within the last month. Since then, when I export a Corel image to EPS, CorelDRAW X6 crashes. Be sure and SAVE before you export!
View 7 Replies View RelatedWell I use Corel draw X5 Service pack 2. Recently I have been having the problem of Corel draw crashing when I export any .cdr to pdf using any settings as long as the pages are more than 2 and the resolution is 300 dpi.
I have tried reinstalling it a couple of times but in vain.
I´m trying to open a file that comes with a cd. Windows explorer tells me the file was produced with coreldraw 5. but when i try to open it coreldraw x6 crashes immediately (x64).
latest patch installed.
link to the file: [URL]
i´d be very lucky if you tell me with which version of coreldraw you were able to open this file and/or how to avoid crashing of coreldraw x6 on my computer.
I'm having trouble with Draw X4 now that I have moved on to Windows 7 64 bit.
When I try to insert a symbol from my user symbols, I get the message that the program has stopped working.
I have tried chaging the compatibilty but that hasn't worked.
When I open a file the program crashes. It doesn't matter what file, they all cause the program to crash. It seems that X6 just cannot create the work environment unless it starts from scratch.
The solution I have found is to start a new document first and THEN open the file I want. After that, everything is fine. I can open any files I want all day with no crashes. Kind of weird, but what the heck..at least it works. By the way, my files are typically small (less than 2MB) composed of a few jpegs, some text, and some simple vector shapes.
I am using the 64 bit version of X6 on a 64 bit pc running Windows professional with 8GB ram.
Latest version installed (16.2)
If I draw a shape (or select an already existing shape) and choose "Bitmap Fill" or "Full Color Pattern" CDX6 freezes and then after several seconds throws the "CorelDRAW X6 has stopped working" error at me with the only options to "Check online for a solution..." or "Close the program"
Prior to the 16.2 update CDX6 would freeze in the above circumstances but eventually come out of it and apply the fill (program wouldn't have to be closed).
All other fills work as expected. This is a Win7 32-bit system.
The problem details are:
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDrw.exe Application Version: 16.2.0.998 Application Timestamp: 50b295cf Fault Module Name: CdrGfx.dll Fault Module Version: 16.2.0.998 Fault Module Timestamp: 50b29664 Exception c0000005 Exception Offset: 000ac375 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
It crashes without warning, it just closed... that's all.It happens whenever I try to:- Save (either clicking on the save button or using CTRL+S)- Group (with CTRL+G or by clicking on the Group button after right click), I've tried to remove the "Pattern" and I can group finally, but still closed when I try to save.I try to remove any fillings but still closes when saving (but it didn't got saved at all)I've browsed through the forums and tried everything... nothing works. Even un-install and re-install didn't work.
It even closes when I try to save a blank page (with only an object like rectangle or something on it)
OS : Windows Vista Home Basic 32bit
Corel draw x4 starts up fine, when you either pick a template, open an existing file, or click the new drawing button the mouse pointer becomes the circle and it says Processing at the bottom right corner of the screen, the status bar next to processing does not progress at all and it just stays like this until i close it. It says (not responding) in the top bar.
I have downloaded the updates from corel draw and have also un installed corel draw and re installed it and it is still the same.
I just installed CorelDRAW X6 on a new 64bit Win-7 machine. When I try to use keyboard shortcuts to cut and paste paragraph text in a document I created with X5 on my old 32bit Win-XP machine, CorelDRAW crashes. I need to be able to work with my old X5 (and occasionally, older) files. Is there a fix for this, or do I need to go scrap X6, and put X5 on my new machine?
View 8 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I'm having some difficulty importing a pdf of a simple architectural drawing with 2 hatches. No problem with other pdfs made with my pdf995 or with the same original drawing to pdf minus the hatches. They are really simple small hatches and small files - 11x17 with minimal detail. The original architectural drawings are made in Turbocad then to pdf. I don't have an alternative way to check this out with another cad software.
Drawx5 crashes just after the dialog box for text options, then I click OK for font substitutions and it 'stops working'. All the same procedure works OK if I remove the hatches before making the pdf.
System is Win7Pro 64 bit, 8gb ram, 4 cores, 1gb video memory.
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
