For some reason my quick key "Control D" for Duplicate isn't working. It shows that it's still listed in the Tools, Options, Commands, Duplicate at times. At others, it appears empty. I now have to go to Edit and select the Delete function each time.
Is my CorelDraw falling apart?
The Quick Selection Tool (QST) was working fine. Used the Lasso Toll and when I tried to use QST again it stopped working.
View 1 Replies View RelatedFor some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
After installing X6 I get this problem...CorelDraw X6 (64-bit) has stopped working.
Problem signature:
Problem Event Name:APPCRASH
Application Name:CorelDRW.exe
Application Version:16.1.0.843
Application Timestamp:4fff8c8c
Fault Module Name:clr.dll
Fault Module Version:4.0.30319.261
Fault Module Timestamp:4ec9f666
Exception 80131506
Exception Offset:000000000040b383
OS Version:6.1.7601.2.1.0.768.3
Locale ID:7177
Additional Information 1:6d4f
Additional Information 2:6d4fcafc156cca63b72c0a4deac1b33d
Additional Information 3:844e
Additional Information 4:844ec7b1bf08d736261a9cce2c2795aa
I have been a user of Corel since 5 (not X5, but the original 5). In CorelDRAW X6 my quick pan with the center mouse button isn't working. It works fine in Corel Paint, but not in DRAW.
View 4 Replies View Related"Snap to object", "To Front of Page", and "To Back of Page" buttons stopped working.
View 14 Replies View RelatedMy CorelDraw suddenly stopped to produce PDFs. The dialog "Publish To PDF" opens fine, but when pressing "Save" it won't do anything after a while of loading. Usually it starts to process the file and a progress bar is shown, but no such is shown and no file is produced. The settings opens fine and no problems there.
Re-installing has been tried without resolving the issue. Different files has been tried, same problem.
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedWhen I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I've designed my vector font and exported the first letter as .ttf. in a new Font File.
When exporting the second letter, it asks me if I want to replace the file, and then says CorelDraw has stopped working. I've re-installed X4, but to no avail.
My OS is Vista.
Font Navigator stopped working correctly. Not showing any fonts. When will be update for this software?
View 4 Replies View RelatedResetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedI am working on a tut that says after drawing a line to > hold down the Alt & Shift keys and drag the line down.
I did this once and it worked fine. However, I had some other problems which I resolved but I had to start over and now the above will not Duplicate the line nor can I move it in the above manner.
This issue has been around for the last 4 versions at least, Quick Mask stops working, I am getting fed up with having tio reset photoshop to its defaults, because this means that it takes me a good 30 min to reset all of my settings again, and as this has now happened 4 times today, it is costing me money, at least CS3 was a little bit more reliable than CS4, I certainly will not be upgrading our copies of Photoshop.
Has anyone got a simple way to get Quick Mask working again without loosing the other settings from Photoshop...
Or does anyone know why this happens? My system is 4 x Quad Core CPU, running 16Gb RAM and 2 x 8800 Video Cards on x64 Windows XP, so it cannot be down to memory.
I run SC3 on a PC. The other day I did something that has made it so my quick mask selection no longer works but I do not know what it was. What happens is after in go into the quick mask mode (tap the q key) and with the brush color the section I wish to mask; I then tap the q key again to exit the quick mask mode but the marching ants surround the entire photo not my selection. When in the quick mask mode it does show on the title bar that I am in the quick mask mode and when I tap q again that I am going back to normal mode.
View 7 Replies View RelatedAnd before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies View RelatedI get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
After recently installing LR 5 today this message starting appearing. I cannot get around it.
View 2 Replies View RelatedEverytime I try to duplicate groups in photoshop cs6 to another open PSD file it usually works, but lately whenever I try to do it it only gives my the option to duplicate the groups to either a brand new file (an untitled file) or to the original file (that i'm duplicating the groups from). It won't allow me to duplicate them to another open PSD file.
For example, (in case i'm not being clear), say I have 2 files open such as A.psd and B.psd but i want to duplicate a bunch of groups i created in A.psd to B.psd. When i click on the groups i want to duplicate and the option box opens- in the destination box it only gives me the option of duplicating the groups to either A.psd (which is useless) or to a new file. It doesn't give the option to duplicate the groups to B.psd. It only gives the option if it's just a layer. I either have to merge groups into one layer or make them into a smart object and use the duplicate layer option instead. It's become a annoying problem because I want my groups to just duplicate. I shouldn't have to merge them in order to send them into another file. It has always worked until now.
i have 3 layers in photoshop. Backgroundlayer1layer2Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur.
When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?
I am working on a floor plan in CS5 Photoshop. Just basically tracing over an original document and erasing what I trace over. I do this all the time and it has been working fine.
But now the eraser won't work at all. When i turn off all the layers except the background layer I can erase things, but then when I turn the layers back on, it doesn't show up erased. I've tried resetting the tool and that didn't work. I'm so confused as to why it just stopped working.
i'm getting the error shown in subject. view details indicates problem with cooltype.dll. error started immediately after i activated a font in suitcase fusion 3. i was able to run photoshop 32bit to finish job. i deactivated font in suitcase and restarted computer. suitcase is not running but i still cannot run photoshop. what can i do to fix??
View 3 Replies View RelatedMy CS5 was working fine yesterday. Today, it abruptly stopped (error message states photoshop stopped working and must shut down.) I reopened both times and same thing happened.
View 4 Replies View RelatedDownloaded PS CS6 from Application Manager. Download and install seemed to go fine, but I can't start the program. Have downloaded and re-installed numerous times, and removed the previous installation before that.
My OS is Windows 7. I have had Adobe software installed, but removed (tried at least) everything when trying to get this work. Photoshop CS5 worked fine on this same setup. I get Windows error message when trying to start the program, and with problem details like this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61beba
Fault Module Name: Photoshop.exe
Fault Module Version: 13.0.0.0
Fault Module Timestamp: 4f61beba
[code]....
I got 57,1 GB free space on drive C, where I've installed the program.
3D functionality has stopped working in Photoshop CC?
View 5 Replies View RelatedHad to replace the hard drive on my iMac. I use Time Capsule and when the new hard drive was installed had Time Capsule bring all my applications and files back. It seems to be working with all other files and apps.
But when I tried to use Photoshop CS 4 I received error message suggesting I restart the MAC which I did. Then got the same error message when I tried to open Photoshop. It said if restarting doesn't work go to Adobe.
I suspect the installation of Canon Pixma Printer software may have trashed Adobe components, is there an easy way to repair/reinstall just that part? I have the CS6 Master Collection and don't want to reinstall the whole shebang.
View 8 Replies View Related