Photoshop :: Mac CS6 Quick Selection Tool Stopped Working?
Nov 26, 2012The Quick Selection Tool (QST) was working fine. Used the Lasso Toll and when I tried to use QST again it stopped working.
View 1 Replies
ADVERTISEMENT
Photoshop Elements :: Lasso Selection Tool Stopped Working?
Nov 28, 2012The lasso selection tool in PSE9 is malfunctioning. When I draw a selection, I immediately get a message saying: "Warning: No pixels are more than 50% selected. The selection edges will not be visible."
This is the kind of message I would normally get when I select wrong numbers for feathering. But now the message comes up when I use the lasso tool to try to select an area. When I hit cancel the message, the selection disappears. But the pulldown menu shows that I can "deselect." When I do that, and start all over, I get the same problem.
I quit and restarted PSE9 to try to fix this but it didn't work. Then I restarted my Mac computer, but that didn't fix it either
Photoshop :: Quick Mask Mode STOPPED WORKING?
Aug 1, 2005For some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
Photoshop :: Selection / Patch - Select Blue With Quick Selection Tool?
Dec 10, 2012If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
CorelDRAW X5 :: Duplicate Quick Key Stopped Working?
Aug 3, 2011For some reason my quick key "Control D" for Duplicate isn't working. It shows that it's still listed in the Tools, Options, Commands, Duplicate at times. At others, it appears empty. I now have to go to Edit and select the Delete function each time.
Is my CorelDraw falling apart?
Photoshop :: Selection Tools Have Stopped Working
Feb 3, 2013I was trying to cut out a bridge stock today, and all of my selection tools are suddenly acting psychotic. Whether it's a lasso or a marquee tool, they all give me this result when I try to select something:
I haven't trying restarting Photoshop, but I just wanted to know how to fix this and how I can prevent it from happening again.
Photoshop :: CS6 Quick Selection Tool?
Aug 29, 2013After using this tool, the image is left with horizontal bands running throug the entire image from top to bottom. In between the bands the image is clear.
View 1 Replies View RelatedPhotoshop :: CS5 Or CS6 - Where Is Quick Selection Tool Gone
Nov 9, 2013I'm using cs6 or cs5 and all I have is the magic wand. I'm also on windows. I've tried to select the magic wand then shift+w but it doesn't change.
View 7 Replies View RelatedPhotoshop Elements :: Where Is Quick Selection Tool In E10
Mar 19, 2014Where is the Quick Selection Tool in PS Elements 10?
View 1 Replies View RelatedPhotoshop :: What Brush Preset Should Be Used With Quick Selection Tool
Feb 24, 2013I'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2...I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
The current preset says its Quick Selection Tool Hard Round 250 1...In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
Photoshop :: CS6 - Monitor Flickers When Using Quick Selection Tool
Oct 15, 2013When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.
View 5 Replies View RelatedPhotoshop :: Quick Selection Tool On Image / It Just Goes Black
Jan 30, 2013I just got Photoshop cs6, and I am probably at intermediate level in expertise. When I try to use the marquee tool, the lasso tool or the quick selection tool on an image, the image just goes black. I have to click back to "Open" on the History the get the actual image back. I have Windows 7 64 bit. I have never had this problem with other versions of Photoshop.
View 4 Replies View RelatedPhotoshop :: Quick Selection Tool - Cut White Out Of Image?
Sep 26, 2013What does the Quick Selection Tool do? I am trying to cut the white out of an image and trying to find the best tool
View 1 Replies View RelatedPhotoshop :: Program Error Using Quick Selection Tool
Apr 18, 2009I try to use the quick selection tool in PS4, I get the message that it is not available because of a program error.
View 2 Replies View RelatedPhotoshop :: Quick Selection Tool Freezes CS6 / Becomes Unresponsive For Minutes
Feb 24, 2013After only two selections the tool becomes unresponsive for minutes.
I'm on a 2.6 Ghz retina MacBook Pro, 16 Gb RAM, and this in connection with an SSD should make this tool very good to use. Operating system: OS X 10.8 "Mountain Lion", latest update.
Unfortunately, it seems to develop some kind of overload, during which you cannot use Photoshop at all. No commands like "undo selection", "quit", "close file" are accepted.
Hint: it seems to happen when you option select (subtract from an existing selection).
Hint: the freeze can be shortened by a tool switch (has to be through clicking on a tool, keyboard commands are frozen as well)
Hint: the "subtract selection" move that caused the freeze appears after Photoshop comes back to life after a couple of minutes. The subtraction to the selection seems to be random, makes no sense, and is not the regular function of the tool.
First step after this freeze would be to undo the last selection, and continue working.If you do several "add to selection" moves, they add up in a kind of waiting line. If you do the subtract from selection move, this doesn't work, and the freeze happens.
So far, I have not noticed the freeze when adding to a selection. Adding to a selection was always quick and instant. The bug must sit in the "subtract from selection" code.On most freezes, the ants continue walking, I just had one (again with subtracting selection) where even the ants stopped walking.
I don't think it has anything to do with Photoshop working. I have used the quick selection tool regularly under CS5 on my old machine (which was a museum piece), and while I had to wait sometimes, it was never ground to a freeze/halt like the quick selection tool under CS6.
Photoshop :: Quick Selection Tool Failing To Select Objects
Jun 26, 2013Every time I use Quick selection tool it selects the area which I don't want to use. I have a website called JoGuru Social Travel Network for which I need to edit it's logo. Now since the logo has many green and blue variation I can't select the area I need.
I thought of changing the color of logo so that it looks refined but green color signifies travel and i can't think of using any other color. It would have been easy to pick other color. For me Green is God. I must use that only. I also need to encorporate small road in it that defines journey to infinity. This tool use to work well before. It's giving me problem for the first time.
Photoshop :: Quick Selection Tool - Turning Off Soft Edge
Dec 20, 2011I just can't make it work.. I need to use QUICK SELECTION TOOL to select part of image and then cut it out and paste it exactly in the same place. But whenever I do it, that tool automatically add feather to the edge so I can't paste it in same place again!
I already turn on hardness to 100% and I don't see any other options I can alter to eliminate it.
Photoshop :: Quick Selection Tool - Couture Left When Deleting
Jul 27, 2012When I use the quick selection tool to remove something, I am always left with a shadow counture of the area that I want to get rid of. I guess I have to make another kind of setting or something, but I cannot find any that works. Photoshop CS6 W7.
View 7 Replies View RelatedPhotoshop :: Auto-Enhance Option With Quick Selection Tool
Oct 3, 2013I'm trying to compare a selection made with the Auto-Enhance check box on and off with the Quick Selection tool, though I'm not seeing a difference. My understanding is that it gives the selection a smoother, less blocky edge,
1. even though I'm not seeing a difference, is there a reason to just not keep it checked all the time?
2. Can you apply this checkbox after making a selection or only prior to doing one?
Photoshop :: Quick Selection Tool - Select Or Deselect Object
Mar 12, 2013On one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies View RelatedPhotoshop :: OpenGL Seemingly Deactivates After Use Of Quick Selection Tool
Apr 27, 2013Before using the quick selection tool, I am able to smoothly zoom in and out by holding Ctrl+Space and dragging with the mouse.If I use the quick selection tool, however, the marching ants line turns into a strange box. I no longer am able to zoom smoothly but instead with the technique above I draw a rectangle which I zoom into. This indicates to me, that OpenGL has been deactivated. I want my smooth zoom back!
I noticed that the preferences always show OpenGL as active, no matter which of the above "state" I'm in. I tried updating my AMD graphics card's driver without success. I found a post describing similar OpenGL problems on the same graphics card and installed the linked driver; the post was 2 years old, but it worked. Re-installing more recent version (Catalyst-Version 12.6) brought the problem back. Newer versions of the driver seem all to suffer from the same problem.
I'm using Windows 7 64-bit,64-bit Photoshop Extended from CS5 Production Premium,AMD Radeon HD 4600 (currrently Catalyst-Version 13.1).
I tried: "Downgrading" the driver (only really old version worked, as mentioned above),reseting Photoshops preferences (Ctrl+Alt+Shift at start),deactivating OpenGL (reactivating only works after restart and problem reappears) but I miss the smooth zoom.
Photoshop :: Quick Selection Tool: Radius Feathers Better Than Feather?
Dec 24, 2007I was using this nice tool for the forth time or so and I accidentally put the radius to 10, and suddenly these horrid jagged edges on model shirts disappeard.
The feather was at 2, and smoothness at 12. (in refine edges)
So should I now think of the radius and the the best method for edges rather than feather.
how the smooth mixes into this.
Photoshop Elements :: Quick Selection Tool Default Settings?
Jan 4, 2013What the default settings are for "hardness" and "spacing" on the brush dropdown for the quick selection tool in PE 10?
View 3 Replies View RelatedPhotoshop Elements :: Quick Selection Tool Selecting All The Image
Sep 27, 2013I'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View RelatedPhotoshop :: Quick Selection Tool - Marquee Jumps Straight To Edge Of Photo
Aug 21, 2013The quick selection tool now doesn't work on the image I'm editing at all. When I try to select only the leaf, the marquee jumps straight to the edge of the photo, effectively selecting the whole of the image and background. Here is a screenshot:
I have tried resetting the tool.
Photoshop :: Brush Tool Have Stopped Working
Jul 26, 2013while working on photoshop, Brush Tool Have Stopped Working.
View 1 Replies View RelatedIllustrator :: The Selection Tool Is Working As Direct Selection Tool
Oct 4, 2013Using the selection tool i should be able tp reduce or shrink the size of the box or an image as a whole without changing the format. Iam not able to do that. I think i disabled something in my illustrator.
View 2 Replies View RelatedPhotoshop :: Liquify Tool Stopped Working Properly
Jan 9, 2013I used the liquify tool on a selected area of a picture and it worked fine. Well, now when I select my area and try to use it, it just slightly warps the area and does nothing else. The liquify screen and options never come up. I think it's just repeating what I did in liquify the last time I used it instead of giving me the option to do what I need to do. It just won't let me do ANYTHING with the tool other than the warping(what I think is the "repeating" of the previous uses effects) everything else in photoshop is working fine for me, this is the only problem I'm having. Before this, it would just crash when I tried to open liquify but I fixed that by changing the video codecs/plugins to the ones that work with it so that is no longer a problem, it doesn't freeze or anything. So why is it just repeating what I did last time?
View 2 Replies View RelatedPhotoshop :: Crop Tool Has Suddenly Stopped Working
May 3, 2012My crop tool has suddenly stopped working. It reduces everything to one pixel.
View 1 Replies View RelatedPhotoshop Elements :: Move Tool Stopped Working?
Mar 1, 2013When I click on the Move tool in my Adobe Photoshope Elements 10, it does nothing now. I have to click on the specific layer if I want to move something.
View 3 Replies View RelatedAutoCAD 2013 :: Arrowhead Type Not Displaying / Working In Quick Properties Selection Dropdown
Apr 27, 2012In the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
View 4 Replies View Related