I'm trying to compare a selection made with the Auto-Enhance check box on and off with the Quick Selection tool, though I'm not seeing a difference. My understanding is that it gives the selection a smoother, less blocky edge,
Â
1. even though I'm not seeing a difference, is there a reason to just not keep it checked all the time?Â
2. Can you apply this checkbox after making a selection or only prior to doing one?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Â
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
Â
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
After using this tool, the image is left with horizontal bands running throug the entire image from top to bottom. In between the bands the image is clear.
View 1 Replies View RelatedI'm using cs6 or cs5 and all I have is the magic wand. I'm also on windows. I've tried to select the magic wand then shift+w but it doesn't change.
View 7 Replies View RelatedWhere is the Quick Selection Tool in PS Elements 10?
View 1 Replies View RelatedThe Quick Selection Tool (QST) was working fine. Used the Lasso Toll and when I tried to use QST again it stopped working. Â
View 1 Replies View RelatedI'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2...I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
Â
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
Â
The current preset says its Quick Selection Tool Hard Round 250 1...In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.
View 5 Replies View RelatedI just got Photoshop cs6, and I am probably at intermediate level in expertise. When I try to use the marquee tool, the lasso tool or the quick selection tool on an image, the image just goes black. I have to click back to "Open" on the History the get the actual image back. I have Windows 7 64 bit. I have never had this problem with other versions of Photoshop.
View 4 Replies View RelatedWhat does the Quick Selection Tool do? I am trying to cut the white out of an image and trying to find the best tool
View 1 Replies View RelatedI try to use the quick selection tool in PS4, I get the message that it is not available because of a program error.
View 2 Replies View RelatedAfter only two selections the tool becomes unresponsive for minutes.
Â
I'm on a 2.6 Ghz retina MacBook Pro, 16 Gb RAM, and this in connection with an SSD should make this tool very good to use. Operating system: OS X 10.8 "Mountain Lion", latest update.
Â
Unfortunately, it seems to develop some kind of overload, during which you cannot use Photoshop at all. No commands like "undo selection", "quit", "close file" are accepted.Â
Â
Hint: it seems to happen when you option select (subtract from an existing selection).
Â
Hint: the freeze can be shortened by a tool switch (has to be through clicking on a tool, keyboard commands are frozen as well)
Â
Hint: the "subtract selection" move that caused the freeze appears after Photoshop comes back to life after a couple of minutes. The subtraction to the selection seems to be random, makes no sense, and is not the regular function of the tool.
Â
First step after this freeze would be to undo the last selection, and continue working.If you do several "add to selection" moves, they add up in a kind of waiting line. If you do the subtract from selection move, this doesn't work, and the freeze happens.
Â
So far, I have not noticed the freeze when adding to a selection. Adding to a selection was always quick and instant. The bug must sit in the "subtract from selection" code.On most freezes, the ants continue walking, I just had one (again with subtracting selection) where even the ants stopped walking.
Â
I don't think it has anything to do with Photoshop working. I have used the quick selection tool regularly under CS5 on my old machine (which was a museum piece), and while I had to wait sometimes, it was never ground to a freeze/halt like the quick selection tool under CS6.
Every time I use Quick selection tool it selects the area which I don't want to use. I have a website called JoGuru Social Travel Network for which I need to edit it's logo. Now since the logo has many green and blue variation IÂ can't select the area I need.
Â
I thought of changing the color of logo so that it looks refined but green color signifies travel and i can't think of using any other color. It would have been easy to pick other color. For me Green is God. I must use that only. I also need to encorporate small road in it that defines journey to infinity. This tool use to work well before. It's giving me problem for the first time.
I just can't make it work.. I need to use QUICK SELECTION TOOL to select part of image and then cut it out and paste it exactly in the same place. But whenever I do it, that tool automatically add feather to the edge so I can't paste it in same place again!
I already turn on hardness to 100% and I don't see any other options I can alter to eliminate it.
When I use the quick selection tool to remove something, I am always left with a shadow counture of the area that I want to get rid of. I guess I have to make another kind of setting or something, but I cannot find any that works. Photoshop CS6 W7.
View 7 Replies View RelatedOn one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies View RelatedBefore using the quick selection tool, I am able to smoothly zoom in and out by holding Ctrl+Space and dragging with the mouse.If I use the quick selection tool, however, the marching ants line turns into a strange box. I no longer am able to zoom smoothly but instead with the technique above I draw a rectangle which I zoom into. This indicates to me, that OpenGL has been deactivated. I want my smooth zoom back!
Â
I noticed that the preferences always show OpenGL as active, no matter which of the above "state" I'm in. I tried updating my AMD graphics card's driver without success. I found a post describing similar OpenGL problems on the same graphics card and installed the linked driver; the post was 2 years old, but it worked. Re-installing more recent version (Catalyst-Version 12.6) brought the problem back. Newer versions of the driver seem all to suffer from the same problem.
Â
I'm using Windows 7 64-bit,64-bit Photoshop Extended from CS5 Production Premium,AMD Radeon HD 4600 (currrently Catalyst-Version 13.1).Â
I tried: "Downgrading" the driver (only really old version worked, as mentioned above),reseting Photoshops preferences (Ctrl+Alt+Shift at start),deactivating OpenGL (reactivating only works after restart and problem reappears) but I miss the smooth zoom.Â
I was using this nice tool for the forth time or so and I accidentally put the radius to 10, and suddenly these horrid jagged edges on model shirts disappeard.
The feather was at 2, and smoothness at 12. (in refine edges)
So should I now think of the radius and the the best method for edges rather than feather.
how the smooth mixes into this.
What the default settings are for "hardness" and "spacing" on the brush dropdown for the quick selection tool in PE 10?
View 3 Replies View RelatedI'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View RelatedThe quick selection tool now doesn't work on the image I'm editing at all. When I try to select only the leaf, the marquee jumps straight to the edge of the photo, effectively selecting the whole of the image and background. Here is a screenshot:
Â
I have tried resetting the tool.
For the move tool you can choose to disable auto selection, auto select a group, or auto select a layer. By default though the path selection tool autoselects a layer. How can I disable autoselection?
View 1 Replies View RelatedDid it used to be true that AI would automatically change the current tool back to the Selection tool after you used another tool (such as drawing a rectangle)?
View 3 Replies View RelatedWhen I use the 'Convert to Black and White' menu option in Photoshop Elements 10, it does a good job, but it still leaves the file in RGB format (Colour)??
Â
I am working for a Publishers, and I keep forgetting to convert the file to Grayscale after running the Wizard.
Â
Wouldn't it have been easier to add this as an option at the end, and have they done this in Photoshop Elements 11 (or later...)?
im attempting to sharpen animage and blur the background, but i cannot figure out where to find teh enhance tool
View 4 Replies View RelatedI select a different layer or group, the Quick Mask channel is automatically selected. This forces me to switch to the Channels tab and select the RGB channel before I can perform work on a layer. Why is Photoshop automatically selecting the Quick Mask layer when switching between layers? I can't seem to find a setting for this and I'm not sure why, all of the sudden, it started doing this. Does anyone know how to stop this madness?
View 5 Replies View Relatedhow do i disable auto-start in Adobe Quick Launch; elements 3.0
View 1 Replies View RelatedThis morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
Â
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
Â
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.
i can only find the quick selection tool. What i really need is the selection tool that only selects what you want it to and not everything around it. where can i find this?
View 6 Replies View RelatedI'm trying to use the quick selection tool to take part of an image out and combine it with another but when i click to make the first selection a "Could not use the Quick Selection because the result would be too big." message shows up. I havent even made a selection so how would it determine if it's too big? I just don't get it.
View 5 Replies View RelatedIs it possible to change the parameter of the new Quick Selection tool in CS3 - as you can with the Magic Wand (1 to 255)?
View 3 Replies View Related