I'm trying to use the quick selection tool to take part of an image out and combine it with another but when i click to make the first selection a "Could not use the Quick Selection because the result would be too big." message shows up. I havent even made a selection so how would it determine if it's too big? I just don't get it.
View 5 RepliesIf you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Â
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
Â
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
i can only find the quick selection tool. What i really need is the selection tool that only selects what you want it to and not everything around it. where can i find this?
View 6 Replies View RelatedAfter using this tool, the image is left with horizontal bands running throug the entire image from top to bottom. In between the bands the image is clear.
View 1 Replies View RelatedI'm using cs6 or cs5 and all I have is the magic wand. I'm also on windows. I've tried to select the magic wand then shift+w but it doesn't change.
View 7 Replies View RelatedIs it possible to change the parameter of the new Quick Selection tool in CS3 - as you can with the Magic Wand (1 to 255)?
View 3 Replies View Relatedif there is a quick key to turn a path into a selection without having to go to the path's palate?
View 3 Replies View RelatedWhen I make a selection on a photo with quick mask in photoshop CS3 and shift > Ctrl > I and delete the background, my image that i'm left with is like 50% opaque. I don't know why its doing this. I've even tried Ctrl > J and then deleting the background and its still opaque. So I am needing some help here because i need to figure out why the images i'm selecting with QM aren't coming out at 100% opacity. Thanks. Here's what it looks like when I delete the background after doing Shift > Ctrl > I
View 9 Replies View RelatedI get the wheel of doom while trying to make a quick selection. This happens with both my mouse and tablet. This hasn't always happened, though. I have PS CC.
View 2 Replies View RelatedI'm not sure what's going on over at the Adobe Photoshop forum, but I've tried three different browsers and I can't get the Create/reply buttons after I log in. So, since life's too short to put up with whatever they're doing, I'll try here...I do a quick selection, then hit the "Refine Edge" button and make a change to the selection, but my change doesn't "take"...
Take an image, one layer (background), absolutely normal, boring image (for example, a white swan sitting in the blue water). Go in with Quick Select and select PART OF the swan. Leave some areas not selected, and select some water (areas that are selected and shouldn't be). I need to refine my selection. I subtract and add bits of selection with the Quick Select tool, but EVENTUALLY I'm going to have to do a more accurate refinement than the quick selection tool can do.
Hit "Refine Edge" from the tool bar and select "Overlay" for the view mode. I can see what's selected, and know what I'd like to change. I have a red overlay so I have a visual guide to changing things.Go to the "Refine Radius Tool" and paint over an area I want ADDED to my selection (a piece of swan immediately adjacent to my original selection).It runs red, like I'd expect. I release the mouse and a second later, the red goes away, and the selection has NOT been changed. I've tried this several different ways, and I'm unable to refine my selection from the Refine Edge tool...
I looked at Martin Evening's CS5 book, and as near as I can tell, I did exactly what he described..He got a selection, added to the selection, and it worked fine..I figure I've got something configured wrong, or something else goofed up. If I need a complex selection, and do the initial select with the Quick Select tool, HOW do I refine the edges and content of that selection? How SHOULD the "Refine Radius Tool" in "Refine Edge" work?
My question is this (its pretty easy so I hope its just a stupid oversight on my part) but anyway...
I just got into messing around with photoshop lately and in a tutorial in a magazine I read for a certain step I read the following:
1) "We need an accurate selection of the figure, so go to the Channels palette and click on the Red channel. Choose the Brush Tool and select a hard round brush from the Brush Preset Picker . Hit Q to enter Quick Mask Mode and paint over the figure...after completing the Quick Mask, hit Q again to exit Quick Mask and save this selection via Select>Save Selection naming it Outline. Click on the RGB channel, before returning to the Layers palette."
Now that was simple enough to understand and the first time I went about it it worked fine...as soon as I clicked "Q" again to leave quick mask mode the portion i just colored in in quick mask was selected by a dotted line...
My problem is that now it doesn't do that anymore. No matter what .jpg file I use...after i leave quick mask mode there is no selected outline and no option to "save selected"...the only thing that is selected is the entire square outline of the canvas...IT COMPLETELY IGNORES WHAT I COLORED IN QUICK MASK
I am using CS3 Mac, 10.0.1
I open a JPG and enter quick mask. I use the gradient tool with a radial gradient and make a small gradiated area. It appears in red fading out to the edges. So far so good.
I USE to be able to exit quick mask, and that gradient would now be a selection. What is happening now though is when I exit quick mask, the area selected is the entire image and not the gradiated area.
Where is the Quick Selection Tool in PS Elements 10?
View 1 Replies View RelatedThe Quick Selection Tool (QST) was working fine. Used the Lasso Toll and when I tried to use QST again it stopped working. Â
View 1 Replies View RelatedI'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2...I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
Â
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
Â
The current preset says its Quick Selection Tool Hard Round 250 1...In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.
View 5 Replies View RelatedI just got Photoshop cs6, and I am probably at intermediate level in expertise. When I try to use the marquee tool, the lasso tool or the quick selection tool on an image, the image just goes black. I have to click back to "Open" on the History the get the actual image back. I have Windows 7 64 bit. I have never had this problem with other versions of Photoshop.
View 4 Replies View RelatedWhat does the Quick Selection Tool do? I am trying to cut the white out of an image and trying to find the best tool
View 1 Replies View Relatedtrying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
I try to use the quick selection tool in PS4, I get the message that it is not available because of a program error.
View 2 Replies View RelatedAfter only two selections the tool becomes unresponsive for minutes.
Â
I'm on a 2.6 Ghz retina MacBook Pro, 16 Gb RAM, and this in connection with an SSD should make this tool very good to use. Operating system: OS X 10.8 "Mountain Lion", latest update.
Â
Unfortunately, it seems to develop some kind of overload, during which you cannot use Photoshop at all. No commands like "undo selection", "quit", "close file" are accepted.Â
Â
Hint: it seems to happen when you option select (subtract from an existing selection).
Â
Hint: the freeze can be shortened by a tool switch (has to be through clicking on a tool, keyboard commands are frozen as well)
Â
Hint: the "subtract selection" move that caused the freeze appears after Photoshop comes back to life after a couple of minutes. The subtraction to the selection seems to be random, makes no sense, and is not the regular function of the tool.
Â
First step after this freeze would be to undo the last selection, and continue working.If you do several "add to selection" moves, they add up in a kind of waiting line. If you do the subtract from selection move, this doesn't work, and the freeze happens.
Â
So far, I have not noticed the freeze when adding to a selection. Adding to a selection was always quick and instant. The bug must sit in the "subtract from selection" code.On most freezes, the ants continue walking, I just had one (again with subtracting selection) where even the ants stopped walking.
Â
I don't think it has anything to do with Photoshop working. I have used the quick selection tool regularly under CS5 on my old machine (which was a museum piece), and while I had to wait sometimes, it was never ground to a freeze/halt like the quick selection tool under CS6.
Every time I use Quick selection tool it selects the area which I don't want to use. I have a website called JoGuru Social Travel Network for which I need to edit it's logo. Now since the logo has many green and blue variation IÂ can't select the area I need.
Â
I thought of changing the color of logo so that it looks refined but green color signifies travel and i can't think of using any other color. It would have been easy to pick other color. For me Green is God. I must use that only. I also need to encorporate small road in it that defines journey to infinity. This tool use to work well before. It's giving me problem for the first time.
I just can't make it work.. I need to use QUICK SELECTION TOOL to select part of image and then cut it out and paste it exactly in the same place. But whenever I do it, that tool automatically add feather to the edge so I can't paste it in same place again!
I already turn on hardness to 100% and I don't see any other options I can alter to eliminate it.
When I use the quick selection tool to remove something, I am always left with a shadow counture of the area that I want to get rid of. I guess I have to make another kind of setting or something, but I cannot find any that works. Photoshop CS6 W7.
View 7 Replies View RelatedHow can i stop my selections from disappearing, so that i make effects in those areas?
View 1 Replies View RelatedI'm trying to compare a selection made with the Auto-Enhance check box on and off with the Quick Selection tool, though I'm not seeing a difference. My understanding is that it gives the selection a smoother, less blocky edge,
Â
1. even though I'm not seeing a difference, is there a reason to just not keep it checked all the time?Â
2. Can you apply this checkbox after making a selection or only prior to doing one?
On one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies View RelatedBefore using the quick selection tool, I am able to smoothly zoom in and out by holding Ctrl+Space and dragging with the mouse.If I use the quick selection tool, however, the marching ants line turns into a strange box. I no longer am able to zoom smoothly but instead with the technique above I draw a rectangle which I zoom into. This indicates to me, that OpenGL has been deactivated. I want my smooth zoom back!
Â
I noticed that the preferences always show OpenGL as active, no matter which of the above "state" I'm in. I tried updating my AMD graphics card's driver without success. I found a post describing similar OpenGL problems on the same graphics card and installed the linked driver; the post was 2 years old, but it worked. Re-installing more recent version (Catalyst-Version 12.6) brought the problem back. Newer versions of the driver seem all to suffer from the same problem.
Â
I'm using Windows 7 64-bit,64-bit Photoshop Extended from CS5 Production Premium,AMD Radeon HD 4600 (currrently Catalyst-Version 13.1).Â
I tried: "Downgrading" the driver (only really old version worked, as mentioned above),reseting Photoshops preferences (Ctrl+Alt+Shift at start),deactivating OpenGL (reactivating only works after restart and problem reappears) but I miss the smooth zoom.Â
I was using this nice tool for the forth time or so and I accidentally put the radius to 10, and suddenly these horrid jagged edges on model shirts disappeard.
The feather was at 2, and smoothness at 12. (in refine edges)
So should I now think of the radius and the the best method for edges rather than feather.
how the smooth mixes into this.
What the default settings are for "hardness" and "spacing" on the brush dropdown for the quick selection tool in PE 10?
View 3 Replies View RelatedI'm trying to get use to this quick selection tool , i have an image i need in the middle of the photo and all round the sides i want to whiten, the tool once draggin down either side selections all the picture no mater what setting i use,
View 4 Replies View Related