CorelDRAW Graphics Suite X6 :: Write Vertical Text In Tables?
Jun 3, 2012I know, if I select Vertical Text (ctrl+.) then I can write wertical text. But the text is writting Up to Down.
I want write vertical text Down to Up. How?
ADVERTISEMENT
CorelDRAW Graphics Suite X6 :: How To Write Vertical Text In Table
Nov 19, 2013how to write vertical text in a table?
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Vertical Text
Jun 5, 2012I have an issue with my text tool. This is on a different computer than the one that was having the Corel corruption I posted on earlier.
When I have the text tool selected and click to to start typing, it always types vertical instead of horizontal. How can I change the setting of this? I can't find any options for this in the customization.
CorelDRAW Graphics Suite X5 :: How To Generate Vertical Text
Mar 15, 2011How do you generate vertical text in X5? In Photoshop CS5 the text tool has has the option for vertical or horizontal text. I haven't been able to figure it out in Corel. I'm sure I am missing something simple. In the paragraph formatting dialog box there is a vertical text option that is greyed out (not axctive) so it looks like the verical text is intiated using another method.
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Vertical Text Placement
Mar 7, 2012I have been using corel since version 3. Had every version up to 11. Just upgraded to x5 and noticed that when I wrap text to a curve I no longer have the 2 text options I am used to.
text orientation
text(or vertical) placement
All x5 seems to have is text orientation. I have looked everywhere for vertical placement. Is it in x5 or is it called something else now?
CorelDRAW Graphics Suite X6 :: Aligning Text Only - Vertical Align Checkboxes Greyed Out?
Mar 28, 2012Windows XP 32bit, English.
This does not occur when aligning objects, nor text with an object.This only occurs (as far as I can tell) when aligning two or more sets of text alone.
When I enter the align and distribute window the vertical align checkboxes are greyed out with "Top" selected.
It is not possible to uncheck or select any other vertical align option. It is possible to "force" the window to deselect it by selecting "top" in the distribute tab, but this does not make the align options selectable again.
You can workaround this by creating a temporary object to align with your text.
CorelDRAW Graphics Suite X6 :: Pantone Conversion Tables When Converting To CMYK
Aug 23, 2012Recently found another bug in X6. This time it is in the Pantone conversion tables when converting to cmyk. I had a job that had been updated over the years and the file was last used in X5. The colour in question was PMS 7406. The file opened fine & was converted to cmyk and sent to the printer unchecked. What could possibly go wrong - this file had been used countless times before without incident. Pantone 7406 breaks down to 18% magenta and 100% yellow (as per Pantone's own specification). X5 converted it to 17% magenta and 100% yellow. Near enough - I'm not going to quibble over 1%. However, opening the X5 file in X6 caused it to use the 'Pantone previous version' colour table (and you don't get any notification that it is doing it). Result is that it now converts the colour to 18% cyan, 24% magenta and 100% yellow. Where the #@**# did it get the cyan from? We are now talking about a completely different color!
It gets worse. If you create a new object in X6 and fill it with PMS 7406 (using the Pantone + colour table) and then convert it to cmyk, you get 6% cyan, 22% magenta and 100% yellow. Again, this is not the correct break down of this colour. Pantone is a world standard with known conversion to cmyk figures. InDesign can get it right, Illustrator can get it right, then why can't Corel? And how many other Pantone colours are wrong? I have used Draw for 20 years and this is the worst bungle yet (apart from version 4). For a program that tells the world it is a professional program to screw up like this beggars belief.
If we have to check every single Pantone to cmyk conversion against the Pantone specifications, then it just isn't worth using Corel in printing. Add this to the font problems in Font Navigator and the scale error in Barcode Generator and it make X6 pretty much useless in the print industry. Throwing in freebies like fonts, second rate web creators and Photo Paint are not much use when the flagship program is sinking.
CorelDRAW Graphics Suite X6 :: Datasheets - Inserting Tables To Hold Data
Dec 12, 2012I am using x6 to create datasheets & need to insert tables to hold the data.Most of the time when doing anything to a table ...combining cells, splitting cells or almost anything, nothing actually works & x6 ends up crashing.
When starting a table, i click on the table icon, go up to the columns & rows box & type the numbers that i want ...but whatever i type, a 3 x 3 table appears.
CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?
Dec 1, 2010We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly
Sep 5, 2009Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?
May 9, 2011X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?
Jan 2, 201302012013010.jpg
Blank Blocks behind text and graphics
CorelDRAW Graphics Suite X6 :: Text Mode Crashes While Typing Text Window Box?
Jul 14, 2013I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
CorelDRAW Graphics Suite X6 :: Fitting Text To Path / Where Text Had Already Been Converted To Curves
Nov 20, 2013A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
CorelDRAW Graphics Suite X5 :: Message - Click Here With Text Tool To Add Paragraph Text Here?
Jul 29, 2011I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
CorelDRAW Graphics Suite X5 :: Unlinking Text Frames To Move Text Independently From Others?
Apr 5, 2011Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Pasting Blocks Of Text Into Text Frame?
Nov 16, 2012Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
CorelDRAW Graphics Suite X5 :: Text Frame When Pasting In Blocks Of Text?
Nov 16, 2012Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
CorelDRAW Graphics Suite X6 :: Lock Text Box To Prevent It From Moving But Still Be Able To Input / Edit Text?
Dec 3, 2013Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
View 3 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Curve Text Within Paragraph Text Block That Is Predefined Shape
Apr 28, 2011how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
CorelDRAW Graphics Suite X5 :: Regular Loss Of Text Or Letters In Printable Drawing Or Text?
Mar 15, 2012I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
CorelDRAW Graphics Suite X5 :: Artistic Text Changing To Paragraph Text When Copy And Pasted To Another Document?
Jun 4, 2012In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
CorelDRAW Graphics Suite X5 :: How To Replace Text To Dynamic Text
Sep 9, 2011I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function.
[code]...
CorelDRAW Graphics Suite X6 :: How Can Text In Text Boxes Be Scaled
Feb 20, 2013I am having trouble resizing text boxes with text in them, so that the text scales with the box.If I convert the text box the curves, it messes up the formatting when I add an outline to the curve because the text box itself is given a outline.
View 4 Replies View RelatedCorelDRAW Graphics Suite X6 :: Condense Text Automatically In A Text Box
Jul 3, 2013Is there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.
CorelDRAW Graphics Suite X4 :: Aligning Text To Bottom Of Text Box?
Oct 20, 2011I'm creating a calendar page - each day is a box. I need the text I put in to be written at the bottom of the box.
View 4 Replies View RelatedCorelDRAW Graphics Suite 11 :: Justify Text In A Text Box?
Feb 4, 2010how to Full justify text within a text block so that the shorter sentences (ie the last line of a paragraph) don't Force Justify?
I'm using the correct justify (full), but it is stretching out the last line as if it's a force justify.
CorelDRAW Graphics Suite X5 :: Extract All Text Into Text (XML)?
Aug 12, 2011I work for a translation company and I've installed a Trial Copy of Corel Draw X5.
I have a 6-page document with several text areas (the Obect Manager sees them as Artistic Areas [I think]).
I'm trying to extract all the text into a text (prefferably an XML), file translate the text using Trados, then import the translated text file back into the Corel Draw Document, with the appropriate text in place of the original text.
I've tried using Extract / Merge text, but this doesn't seem to work.
CorelDRAW Graphics Suite X6 :: Text Over Artwork?
Feb 25, 2013I really don't know the best way to do this or maybe there is a standard, but here is what I am wanting.
When you put text over a simple vector graphic, the graphics makes it hard to read the Text.
I normally delete the graphic lines touching the text and this works but was wondering if there was another way.
Example: if this is a one color design "White" and it is just an outline of lets say a human, and I want to display text which is "White" also across the human image sometimes the image will interfere with being able to read the text clearly.
CorelDRAW Graphics Suite X5 :: Text Editing Box
Feb 28, 2013Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies View Related