How do you get your font to output in inches. I have tried to type in 2.25 inches and CorelDraw changes it to 162 pts. However, when it prints out it is not 2.25 inches it is more like 1.5 inches. Is it the font? I am using ITC Benguiat? Also, how do you change the font settings in X4 from pts to inches.
View 10 Replies
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
I just upgraded to X6. Connect show thumbnail of CDR files, but none of SVG clipart, neither CPT files.
I have Corel Graphic windows shell extension installed. Actualy the problem is the same with windows explorator, I can see thumbnails of CDR files, but none of SVG neither CPT files. I thought Connect could allow me to see those thumbnail.
it was the same problem with connect X5.
What could I do to see the CPT and SVG thumbnails ?
When we go to use the clip art in connect all the clip art images are boxes with an x in the middle and you have to physically open each one to see what the clip art is. Are missing something here, do we have to click on something to view the images in the file without having to open each image.
View 1 Replies View RelatedI checked on the content manual, I found CGS01917 interesting. I copy the CGS01917 in connnect, can't find it. I know it's on my HDD.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Some of the earlier versions (eg WP12) included clipart in .jp2 format. Connect V6 searches these files - but can't display them.
View 2 Replies View RelatedWith the same folder open in Scrapbook and Connect side by side within Draw as a test , PSD and RIF thumbnails are visible in Scrapbook but not visible in Connect.
I would prefer to use Connect over Scrapbook but these are the two main file types I use.
Is there a way to view Painter RIF and PSD thumbnails in Corel Connect?
(CDR X5 SP3, on Windows XP SP3)
Recently had problematic re-install of both X3 and X5. Finally succeeded in sequential numeric order (i.e. first X3 and then X5). However now, CONNECT X5 no longer displays CDR vector file thumbnails. Currently CDRs are associated with X3.
View 14 Replies View RelatedWhen I open draw X5 and a new page, I put an object on that page but it does not tell me where that object is on the page. When I put in a X and Y dimention it will move that much and resets back to zero. Is there a setting some where that I have to change? In X3 it whould tell me where the object is.
View 13 Replies View RelatedHow can I add shutterstock to correl connect like the Flickt, fotolia, iStockphoto?
View 2 Replies View RelatedI can't import a vector from Corel Connect without either a crash or an invalid file format. The import is into PhotoPaint! It also says "The CDR converter has failed"
View 5 Replies View RelatedI bought Corel Draw X5 sometime back and had no issues.Then two weeks ago I purchased the Corel Draw X6 upgrade to take advantage of the 64 Bit design and the Free Corel Web Designer add on.My system is an AMD Phenom 965 x4 with a Win 7 HP 64 Bit OS loaded... 8GB RamI did non uninstall CD X5, when I loaded the CD X6So the problem....In Connect when I open a folder with pic files (raster) the Viewpane icons display normally...when I open a folder with Clip Art (vector) files each file displays the same default thumbnail with filename text caption... In my previous CD X5 32 bit install the Connect app worked with out errors displaying a Clip Art vector preview. Now after installing X6 64 bit, Connect in both x5 32 & x6 64 does not display previews for the clip-art .
View 3 Replies View RelatedI would like to use a photo frame from connect, and keep it in the Effects>Creative>Frame menu of frames. I have downloaded and clicked and dragged the frame to my image, but I would like to reuse this frame. Is it possible to add it to the menu? I can download it to the menu - but it is a temporary item in the list of views to the right, which can be replaced from any of the permanent members of the dropdown selection of frames on the left of the Frame menu. I would like a frame to become one of those "permanent frames."
View 1 Replies View RelatedOut of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View Related1. Choosing a font is an intolerable task.
2. Is there a program which will separate out Gothic, Roman, Script, Poster, Fancy, Serif, non-Serif,and any other special characteristics. Then put them in separate folders.
3. I can't get Bitstream Navigator or Typograph to do this for me.
PS: My computer has over 6,000 fonts and about 800 in the Windows Fonts folder. It's bewildering.
I downloaded "Bebas" font, but I can't make it work in Photo Paint X4 because it's not showing in Font Navigator. I made sure it is in the font directory and even restarted my pc.
View 11 Replies View RelatedAbout a month ago I created a text using some font (font name is irrelevant, as this problem applies to other fonts as well) and then I saved the file, with white background, as png. Today I'm trying to do exact same thing with with exact same font, but somehow letters look different (a little bit). I'm using the same "text antialiasing" setting (hard), obviously same font size, document has same dpi. Month ago letters looked nice, for example "o" was symmetrical, now it isn't and it looks worse, but most important - different.
I haven't changed anything, haven't installed any updates etc. There's a difference, so something must have been changed, but what. I'm using Win7 64-bit and PHOTO-PAINT X6.
I created a template 1 inch high, 3 inches wide. I have set it to get one line of text input from a .csv file created in Excel.
The text input has been set to use Arial 22pt. Sometimes my line of text is too long and the input becomes truncated on start and end of its line. I have tried to change the text to a paragraph text and using fit text to paragraph frame with limited success. Sometimes it works ok, automatically downsizing the text to fit but often it wraps to a second line with isn't visible on my finished print. So, by trial and error, changing the text smaller and smaller until I can see the full line in a print preview and it will work. Tedious, tedious, especially when my list has over 50 items. (the print preview setup may show 6 across, 10 down.
Any good way to downsize the text automatically to fit the template box? I want to have consistent output and if a short word or line fits the space I want it to use the Arial 22pt font, not stretch to fill the space available. However, if the word or line is too big to fit, I would like it to automatically shrink to fit the space.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies View RelatedI'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?
View 2 Replies View RelatedFont is fuzzy no matter what font type I choose, why is this happening? Using Photoshop CS6.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedAfter opening a file from another designer, this Chinese font has taken over my "omens – regular" font file. Anytime I use it, it converts to this font and each time I need to change a font weight, I must do it manually. As you can imagine, I use our company font all day so this slows me down quite a bit. Have you heard of this? It seems like some sort of font virus. I've researched removing it, yet can't seem to find the original font file to get rid of, which is even weirder."
We tried moving the font family to the trash, emptying the trash, rebooting the machine, and re-adding the font family and it still is happening.
I know this is probably easy, but I can not find the answer.
We've received a dwg drawn in mm (I think) and I want to convert it to inches.
I go to format units and it says unitless. Changing it there does nothing.
I don't want to scale everything we get from them, I want to change the dimension units.
It looks like the scale factor is .0245 in alternate units - correct? Need verification
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
my font is so small and its font size is at 72pt how can i make it big again
View 5 Replies View RelatedIs there a way to specify a given system font that should be substituted for a given missing font? For example, the document I'm working with contains CourierStd and CourierStd-Bold which are not installed on my system. I would like to set Illustrator so that any time a document that contains these fonts is opened, Courier New and Courier New Bold are substituted automatically.
View 3 Replies View RelatedAn eps file opens without any problem with the preview as .pdf on Mac OS 10.7.5In illustrator when I open the same file, the main font is not recognized and no warning said the font is not available.
View 7 Replies View RelatedSometimes I like my dimensions to be in all inches ( 24" ) and most of the time I prefer feet/inched ( 2'-0" ) Where do I change this in the dimension style setting or properties?
View 2 Replies View RelatedAnother problem i'm afraid!!! We had a problem with a drawing which came from an outside source, and some how set up the workspace of my colleague into inches instead of mm?! we managed to sort that (how - just randomly clicking!) but now they can only select one item at a time? they can select by dragging over the items but cannot individually select item by item
View 6 Replies View Related
