AutoCad :: Z-levels And Layers
Jun 20, 2012
I have two problems with my ceiling drawings that i'm working on. I think the information on the drawing originally comes from a Revit model.
The drawing, which is supposed to be a 2d drawing has information on several Z-levels. I'm trying to flatten the drawing using the FLATTEN command, but it doesn't work.
The second problem is that layers that are non visible are turned on and are not freeze. I've also checked the model file and they are turned on there as well, although here they are visible.
View 5 Replies
ADVERTISEMENT
Apr 12, 2013
if I have a white point that's 231/217/183 (3x3 sample) and I also have a 228/228/228, which is the better to select as my white point? I've never been confident on whether it's better to get closest high values or highest value in one of the RGB points.
View 4 Replies
View Related
Aug 21, 2013
I know the title sounds weird, but I am having trouble keeping my levels from reverting back to their default look when saving as a jpeg or attempting to flatten or merge my layers. I can attach a link to the PDS if you would like to take a look at it. The layer that is losing its levels settings is called "Stars". I don't change my levels often, so I am sure its something I am just missing. The levels are just changes on a single layer, as stated above its the layer called "Stars".
View 3 Replies
View Related
Nov 27, 2013
then I open a new drawing, put down my assembly and get this:
They say a picture says a thousand words, and after countless re-tries I'll let them do the talking. That way there's no swearing involved
View 7 Replies
View Related
Apr 17, 2011
How can I fixing ( for example) attachment DWG contains too many elevation levels for ( Lines, Dim, Text & Layers) quickly, from all elevation levels into zero elevation level.
To explain more : When I am looking on top view it's good plan, but when I am looking on other Isometric view it's shown many levels . I need to fix every things quickly to zero level ?
View 7 Replies
View Related
Apr 16, 2013
I need to export our BOMs from inventor into a csv file that can be loaded into our ERP system. All of that code is working great and the help files were useful in getting this completed. However it only will work if the assembly model is in the master level of detail!! This is not good at all since the only reason we use levels of detail is becasue our main level assemblys are 1000+ comp and our computers cant function with these levels of models in the master level of detail!! Is there anyway around this?
View 2 Replies
View Related
Dec 12, 2013
I'm not getting the design levels of assembly, just major offset and elevation, how can i get all design levels from where my assembly is changing and where it is matching to the existing surface, is there any band problem or anything else, im sending the view that how i'm getting my cross section and also i want to know that how can i control text size because it is too big for sections.
View 6 Replies
View Related
Mar 25, 2013
I have a building with 2 levels & I have one stairwell. My 2 levels are in a shell.dwg - (first floor level & second floor level). I have a simple stair & landing, which is an element. I insert that element into the first floor level. Everything is fine there, but when I set up a view drawing with the shell (construct) & stair (element in construct) for the second level the stair is diplayed as if it is going up from the first floor level - I need it to show going down from the second floor level. Is there way to show that with one stair?
What we have done in the past is to not have levels, 1 construct for first floor & another for second floor - creating a stair styles for each floor. But when you do a model you have stairs on top of each other (not really using the software like we should). So my question is how do I have 1 stair for 2 different levels & show it correctly for each level. When I set my cut-plane height for first floor level - looks great, but when I set it second floor level - either it remains the same obviously or when I uncheck the override display config. in other on the display tab in the style the stair disappears. I'm trying a new way of creating models/plans & I can't think on how to create the stairs correctly. What am I missing in order to look correctly in plan view without making 2 stairs.
View 1 Replies
View Related
Mar 20, 2012
I just started aca12 today and i have a substantial query:
i've set up my project and levels. i have -1, 0, +1 levels with certain thickness each. i've noticed that the levels are separate dwg files. and each of them has 0.00 elevation for walls and elements that i put in.
a. now, i'd like to know how to put all the levels together, say, in 1 single display, so that i can make 3d view of the whole building?
b. btw the level names can be different from constructs' names, am i right?
c. why when i choose ,,copy constructs to levels'' nothing happens on those levels. i don't see any new elements there? instead of them i get 3 copies of the same level, like ground floor (1) ground floor(2) etc.
View 4 Replies
View Related
Apr 23, 2012
Is it possible to use the 'Link Levels of Detail' command via the API ?
I can activate the command by using the CommandManager
oContDef = ThisApplication.CommandManager.ControlDefinitions.Item("AssemblyBonusTools_LinkLODsCmd")oContDef.Execute
But the command then requires a UI selection - I want to select the iLogic LOD.
I've tried using the CommandManager.PostPrivateEvent but to no avail.
View 3 Replies
View Related
Feb 21, 2012
Any list of what the differnt levels of Expert Mode do? I can't seem to find it in the product help file.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
View 1 Replies
View Related
May 7, 2012
I'm trying to create a parts list that will show item numbers for the sub assemblies and the individual parts for each sub assembly. When I'm creating the parts list in the drawing, the option for "All Levels"is greyed out once I select my source assembly. How I can show this in a Parts list?
View 9 Replies
View Related
Aug 6, 2012
I;m trying to setup linked files in max from AutoCAD Architecture 2013. However, for each file attached the levels of the project from ACA are not recognized in MAX - all the levels are stacked ontop of eachother in the same place. I did not see an option in the presets for MAX to understand this.
View 1 Replies
View Related
Aug 21, 2013
I am creating a project with multiple level in ACA 2014. Set up levels like we always have but now we have a project where the lowest level is below 0. When I generate a model or elevations, the model is created with the lowest level inserted at z=0, not the real level.
After I experimented, if you create a model with say level 1 & 2 not included, it creates the model with level 2 @ z=0 ?
View 5 Replies
View Related
Dec 8, 2012
I've assembly with multiples sub-assemblies, when I put part list with "parts only", it shows all parts of sub-assemblies and when I put with "structured", it shows all sub-assemblies(structured).
Is there a possibility to show selected sub-assemblies in parts while remaining as structured in one part list?
View 5 Replies
View Related
Jan 20, 2013
I have a problem iterating heights when making a polyline between two different points that have Z-values. I've used Autocad Civil 3D for working with geodetic data with height measurements before and I remember using geodetically measured height values, transforming them into a surface and then when I create a 3Dpolyline within this area the polyline automatically gets z-values that change along the line.
In other words, I could use this 3Dpolyline to obtain a profile that gives me z-values even where there is no exact point with a value has been physically measured. It was a while ago I worked with Autocad and now when I started again I have a similar problem but can't manage to create a surface and get iterated values.
My exact problem this time is:
I have a sewage pipe that runs for several kilometers that is drawn as a 3Dpolyline, with correct x- and y-values. It doesn't have any z-values yet and these are what I want to obtain. I want the polyline to have continuous z-values that changes along the polyline (not only in vertexes) so that a smooth profile can be drawn if wanted. I have data of measured actual z-values for approximately every 500 meters or so along the sewage pipe and these are currently drawn as 3Dpolylines of around 20 meters going perpendicular to the pipe (as in the picture). In other words there are bars with z-values crossing the pipe all along the stretch. Now, what I want to do is to somehow make the polyline that represent the pipe to get the heights from these perpendicular bars with the measured z-values. If I try to draw a new 3Dpolyline between two of the measured bars where the actual pipe is supposed to be, the end vertexes of the 3Dpolyline gets the z-values of the bars. However, the value in between the bars gets the Z-value 0. So, if I start a 3Dpoly on bar 1 then continue the pipe with another vertex, and then finish off at the second bar I will have 2 vertexes with the correct z-value but the middle vertex will be incorrect (0). How do I get the pipe to get the correct z values automatically iterated from the values on the crossing bars? Is this even possible to do? Should I create a surface from the bars first, and in that case how do I do that? If possible I don't only want the vertexes between bars to have iterated z-values, I also want the entire line to have a correct value.
I've attached a crappy image made in paint (since I don't have Autocad on my home PC, only at the office). And just to make things even clearer I'll give an example. Let's say the pipe distance from 1 to 2 is 10 meters, the distance between 1 to 3 is 30 meters and the z-values of bar A and bar B is 10 and 25 respectively. So, when I draw a 3Dpolyline from 1 to 4, I want the vertex 2 to automatically get z-value 15 (since it's 1/3 on the way to B). In the same way, I would like for example the point on the pipe that is right in between 2 and 3 to have the z-value 20. I won't mind redoing the bars to for example singular points instead, if that makes it all easier.
View 9 Replies
View Related
Oct 25, 2013
I have created an alignment and long section and over layed my assembly to produce the corridor through my alignment. However it is standard practice in the UK to show the channel levels on a long section.
View 3 Replies
View Related
Dec 14, 2012
I am looking for a way to export the structured BOMview from Inventor to either Excel or Word. That’s all good and I can do that but I struggle to find a way to include “All Levels” of the structured BOM view. At the moment I use a “For Each item in BOMview” loop to cycle through the BOMView items.
I have also set the StructuredViewFirstLevelOnly property to False. The For Each loop does not pick up any items inside sub-assemblies.
What would be a nice way to drill down and get an item output like this:
1
2
2.1
2.1
3
4
5
5.1
5.2
Etc.
View 4 Replies
View Related
Apr 29, 2013
I've got a cut./fill plan with red and green surface spot level labels (derived via a grid) but wonder if there is a way to make the decimal point coincident with the with "X" marker.
View 2 Replies
View Related
Mar 8, 2012
I have a survey drawing and would like to create a surface from spot levels. However, the drawing has been flattened, and the spot levels are just text.
Is there any way that the Z value given in the level can be grabbed, and used to draw a point at that location? I have about 2000 spot levels so I'm not doing it manually...!
View 9 Replies
View Related
Aug 7, 2013
I have a civil3d model and now have an amended layout which I need to update to.
xref'd layout is 2d so I want to snap blips on my feature lines from the original location to new location while maintaining their z value.
I know you can turn off and on the ability to pick z values but can't remember the command (lost notes).
I have tried changing the osnapz option with now luck.
View 2 Replies
View Related
Oct 12, 2012
I have an existing ground surface with all different z co-ords and im trying to add three proposed buildings to my exisiting ground with all the builidngs having a level of 32.5 as a minimum, however at some points the ground is higher than 32.5 and I only want to raise my existing ground to 32.5 within the proposed buidling layout if it is below 32.5 as im doing a flood calculation. What do i need to for this?
View 2 Replies
View Related
Dec 18, 2012
is there a way to turn off different levels of shading in the subassemblies that show up? when i orbit my road, i cant clearly see what is going on, and would like to turn off some shading. see image, i want to turn off where the arrows are pointing.
View 2 Replies
View Related
Sep 20, 2013
I have an assembly file in which I have created several levels of detail. My intent was to suppress specific parts in the assembly (for views in the idw and to calculate the weight of the assembly).
I have noticed that the mass is incorrect for the level of detail that I want calculated. I determined this after creating a new assembly and deleting all parts that were not used in this level of detail. And, by viewing all parts individually and adding them up by hand.
All parts in the assembly have the correct density. I have selected to calculate the mass properties of the active level of detail when updating.
My questions: Am I correct in assuming that the assembly will caculate only the parts that are not suppressed? Or, am I thinking of it wrong? Is this particular assembly messed up? I haven't noticed this before and am now concerned that my weights have been incorrect.
My solution to use right now is to create a new assembly just for figuring out the weight. I think there is a better way.
View 5 Replies
View Related
Feb 4, 2011
How do I create Multiple Levels in a single Drawing File
View 4 Replies
View Related
Jan 6, 2014
Attaching the draw.
The top transom (beam) has to be cut on 2 levels degree : inout as the circle diameter , and up and down as the slope . I made the drawing with the SWEEP command of a 2D transom view along a line, but the result is not good To get the dimensions of manufacturing, it is good as a general "simulation". How can i do it more accurate?, or it is a big task for the autocad?
View 2 Replies
View Related
Apr 23, 2012
When using the import text option from within the mtext editor, Is there a limit to the number of indent levels that AutoCAD supports?
I've customized a style/format in Word and seem to be hitting a limit at the fourth level after importing into AutoCAD. The fourth level aligns with the third level.
View 4 Replies
View Related
Aug 14, 2011
I have an assembly consisting of 4 sub-assemblies. Item 4 is a mount plate c/w M16 fasteners.I would like the fasteners to display as sub-parts under item 4 (24520020s) as 4.1, 4.2, etc because they are also purchasable separately.
I do not want to display the mount plate (03241389s) because it's not purchasable separately.
When I expand item 4 in the parts list it automatically turns visibility off for item 4 (24520020s), and only shows the children (0231....s).I would like to display item 4 & the fasteners only. Quite simple to turn off visibility of 03241389s, but cannot get the parent and child parts to display at the same time.
View 4 Replies
View Related
Feb 26, 2012
What I would like to achieve is a section band style for bulk earthworks and simple access roads that shows the design level at Grade Breaks only. The problem I am having is that Grade Breaks are being recognised as where the sample line crosses a triangle, not where the the grade actually changes/crosses a feature line.
A have a number of simple platforms, that I have created using an infill from feature lines, usually these platforms are surrounded entirely by feature lines of the same height. As to be expected, Civil 3d creates a few flat triangles, and as a consequence, all of the points where the sample line crosses these show up on my band style. Is there any way to achieve this band style?
View 2 Replies
View Related
Jun 18, 2013
I used to a have a LISP for changing levels en masse if I needed to transform a survey by a certain factor. Unfortunately I've lost it.
View 4 Replies
View Related
Dec 31, 2013
I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
View 2 Replies
View Related
