AutoCad :: Reduce Height Of Command Line?
Sep 11, 2011Just trying to reduce the height of the command line. I thought you just had to hover the mouse over it and drag it back down I have 3 rows plus the command prompt line
View 5 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Accept Text Height In Mtext Command
May 31, 2013I am working on a simple function to add/remove a non-printing stamp our drawings to specify a preliminary drawing. The issue is that I cannot seem to get AutoCAD to accept the text height in the Mtext command. Below is the code; try it and see.
(DEFUN NOT4CONSTRUCTION(/ CTR HGT PT1 PT2) (IF (EQ (GETVAR "CLAYER") "NOT4CONSTRUCTION") (SETVAR "CLAYER" "0")) (IF (EQ (GETVAR "CTAB") "MODEL") (SETQ HGT "8'-4"") (SETQ HGT "1"")) (IF (= (ASSOC 0 (TBLSEARCH "layer" "NOT4CONSTRUCTION")) nil) (PROGN (VL-CMDF "-LAYER" "M" "NOT4CONSTRUCTION" "C" "30" "" "TR" 90 "" "P" "N" "" "") (SETQ PT1(LIST (- (CAR (GETVAR "viewctr")) (/ (* (GETVAR "viewsize") (/ (CAR (GETVAR.
[code]....
AutoCAD 2013 :: Command Line Appears Again After Plot Command?
May 15, 2012I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
AutoCAD 2010 :: Command Not Showing Up In Command Line
Nov 27, 2012without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
AutoCad :: Execute Line Command Like A Single Command?
Oct 27, 2013line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedAutoCad :: Locating Point On A Line At Specific Z Height
May 3, 2011I'd like to place a point at a specific "Z" level on a line. The line is not perpendicular to the x~y plane. On the attached .dwg, say @ z+.750 on one of the angled lines on the "constraints" layer.
0699 Cadtutuor.dwg
AutoCAD Visual LISP / AutoLISP :: Get / Edit Properties (height) Of A Drawing View Created With Viewsection Command?
Apr 23, 2013How can I get/edit the properties (height,..) of a drawing view created with 'viewsection' command?
View 2 Replies View RelatedAutoCad :: Reduce File Size Using Polyline Instead Of Line While Drawing?
Apr 26, 2011I've heard that you can reduce file size using polyline instead of line while drawing (or vice versa... don't remember) is it true and what exactly should be used. I think, why we would need the line tool at all if polyline more convenient.
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Row Height In Line And Curve Table?
Dec 4, 2012Is it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
AutoCAD 2013 :: Select Line Then Enter Command - Line Unselects
Jun 28, 2012if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
AutoCAD .NET :: Write A Text On Command Line At Same Line And Overwrite Existing
Jun 10, 2011Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
AutoCAD 2010 :: Where To Set Drawing Style / Text Height / Line Space Factor
Mar 15, 2013Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length
Oct 21, 2013I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way?
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Reduce The Line Less Than The Hairline Width
May 23, 2013In the Object properties Is there a way to reduce the line less than the hairline width.
View 8 Replies View RelatedIllustrator Scripting :: How To Give Line Height To Text In AI Script
Jun 4, 2012how to give line height to text in AI Script
View 3 Replies View RelatedIllustrator :: Height Of Line Segment - How Many Stroke Points In Inch
Jul 31, 2012I'm trying to figure out the height of my line segment. It has a 1.5 stroke point. How many inches is that?
View 3 Replies View RelatedPaint.NET :: Grid Setup - Inline (negative Outline) To Reduce Line Back Down To 10 Pixel (or Less)
Feb 25, 2013I have a grid set up. say 10X10 each. I then fill in each square of the grid. I get rid of the grid, left with 10X 10 squares next to each other separated by 1 pixel then I do an outline to quickly get rid of the spaces between each square.
Now I I have 12 pixel wide line, now I would like to do an Inline (negative outline) to reduce the line back down to 10 pixel (or less ) wide line.
Since it is not exactly a straight line, but rather than a zig zaging line I can't exactly use the pixel selection tool.
AutoCAD 2013 :: Cut Line Command?
Apr 13, 2013I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedAutoCAD Map 3D :: Command Line Next To Cursor?
Oct 18, 2012I had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
AutoCad :: Blank Command Line?
Nov 20, 2012This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedAutoCad 2D :: Command Line For Dimension Fit?
May 3, 2011Command line for Dimension Fit
View 1 Replies View RelatedAutoCad :: Lost Command Line
Jul 26, 2011my command box has mysteriously vanished (more than likely my own doing) and I would really like it back!
View 3 Replies View RelatedAutoCAD .NET :: Getting Command-line Parameters
Jul 11, 2012From my .NET dll I need to get the command line parameters that were used when AutoCAD was launched.
In the unmanaged world I used acedGetAcadWinApp.
Is there a .NET equivalent?
AutoCAD .NET :: Get Input From Command Line?
Sep 30, 2013I am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedAutoCad :: Can't Enter Command Line
Aug 1, 2011I have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
AutoCad :: Command Line Changed All By Itself?
Oct 1, 2013I can't see that I changed any setting (never do) or did anything to make it so the instruction line under the Command: window at the bottom of the screen now expects me to enter text, i.e. In the Command Window we have "open", after I clicked on File / Open, but instead of being taken to the usual drop down of my hard drive the bottom line on my monitor reads, "Enter name of drawing to open <.>: The same thing happens if I try to save a drawing. This is making it extremely difficult to open and save, i.e. to work....
View 1 Replies View RelatedAutoCad 2D :: ED Command To Add Text To Dim Line
Jun 20, 2012I recently started using v2012 after some time using 2006 2008. I frequently would use the ED command to add text to a dim line but it appears 2012 uses a different command for this.
View 6 Replies View RelatedAutoCad :: Typing Cal At The Command Line
Jan 21, 2009I would like to calabrate a tablet when i type cal i get this
View 9 Replies View RelatedAutoCad :: Hidden Command Line?
Dec 30, 2013I've been trying to draw without the command line visible and am liking it. Have been using F2 if I need it while in a command but am finding the text window a bit obtrusive. It also gets hidden when you click in the drawing area.
Is there a way to activate the command line transparently? If you are in a command, Ctrl+9 cancels it.
AutoCad :: Command Line Placement
Oct 25, 2012I was going through some exercises in an ACAD book and floating my command line, etc. and now I can't get it back to it's original place. Or at least when I do it's covers everything there.How do I get it back to normal?
View 9 Replies View RelatedRevit :: Filter Walls By Height / Unconnected Height
Oct 25, 2012how to apply a filter to a Floor Plan to color code my Walls by Unconnected Height for coordination purposes?
I want to disseminate which walls are currently modeled to deck and which ones stop short so I can selectively coordinate this.
This seems completely logical, but I don't see the option to allow this.
Why does Revit allow me to schedule the Length of a Wall, but not it's Height - am I missing something?