AutoCad :: Lagging Due To Windows 7 Update?
Mar 21, 2012
Yesterday (3/20/12) AutoCAD started lagging really bad when starting or ending certain commands (like "line") and I tried various things that didn't work first and then looked to see if I had gotten a recent windows update. Sure enough there was one right before the problems started. I did a system restore back to an earlier time and it fixed it right up. I actually had to restore back to 3/13/12 because for some reason it didn't want to restore to 3/15/12.
View 1 Replies
ADVERTISEMENT
Mar 4, 2013
Software: ACAD LT 2010. Recently I upgraded to a new computer and Windows 7, from Win XP. Now ACAD is lagging and dragging. Also, sometime it takes forever to open a file.
Here are my new computer specs.
Dell Precision T3600,MT,425W
Four Core XEON E5-1607, 3.0GHz, 10M, Dell Precision T3600
View 9 Replies
View Related
Jul 13, 2011
I started getting a fatal error just on opening Map3D today. I googled the error message (FATAL ERROR: Unhandled e0434f4dh Exception at 7c812afbh) and a couple things came up about windows updates.
I did get a windows update this morning, so I don't know if it's related to that or not. Anyway, I can't open map now, I just get a fatal error after it loads up. Im using Map3d 2010 on win xp.
View 2 Replies
View Related
Mar 5, 2012
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
[code]...
View 9 Replies
View Related
Dec 13, 2013
Computer: Dell Optiplex 790, Intel i5-2400 - 3.10 GHz, 8 GB RAM, NVidia Quadro 600 video card, Windows 7 - 64 Bit
Vault: Files are not displayed if opened in Detail view. Must go to the Incon view to display files. Then, switching back to Detail view, file (Vault) status is not shown. If click "Get/Check IN" on file, Vault will crash and shut down. More recently, an HTTP 404: Not Found error appears when clicking on files - may disappear after a wait or clicking on the file repeatedly.
Inventor: Cannot access any files through the Vault tab - Inventor crashes and shuts down. If file opened from Vault instead, it will open and can be saved, checked In/Out.
All of this started a couple of weeks ago shortly after installing Windows Updates. It occurs only on my machine. No other Vault/Inventor user is having any problems. Two IT techs spent a week trying to solve the problem. The only solution was to unistall and reinstall everything including Windows 7. It worked great for a week until another Windows update was installed - now back to the same problems.
View 1 Replies
View Related
Sep 17, 2013
I have an original version of Photoshop CS3. I run Windows 7 32 bit. After an update of the operating system by MS, my Photoshop refused to work, whereas before the MS update, the software worked perfectly.
View 2 Replies
View Related
Jun 15, 2013
when trying to update PS CS 6 the following Error-Code occurs:
U44M1P7
- 0 fatal error(s), 1 error(s)
06/10/13 20:42:04:681 | [INFO] | | OOBE | DE | | | | 6128 | Win OS version: 6.1.1.0 64 bit Type: 1
06/10/13 20:42:04:681 | [INFO] | | OOBE | DE | | | | 6128 |
[code]....
When i try to install the update manually, for some reasons it shows not in PS. Starting Extension Manager I still have to update PS.
View 2 Replies
View Related
Mar 1, 2011
CorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
View 5 Replies
View Related
Aug 25, 2012
My Photoshop CS6 (cloud version and actiive) has started crashing as soon as I load an image.
This problem began after an auto update of Windows 7 It took several tries before the Windows update to work (got error message saying Windows could not install updates) until this morning when the update was successfully installed. Now PS CS6 has stopped working.
View 4 Replies
View Related
Oct 17, 2013
CS6 Adobe Photoshop Extended (64 bit) installed on Windows 8 will not update. Adobe Application Manager opens with message as shown below. I use Kaspersky Internet Security which I am not very familiar with as yet. I tried to update after turning firewall off without success.
View 4 Replies
View Related
Oct 8, 2012
On aol as browser, I am trying to download update 9.03. It comes up as blocked by my browser. Is there anyway I can get this to let me download? I have bothe Mac and Windows versions on my Mac and PC (Windows 7).
View 2 Replies
View Related
Jan 10, 2013
Yesterday i work normal on my PC and after the windows Updates from today my Corel doesn´t start.
@ frist I try ti uninstall all updates from Microsoft and restart my PC.
My System:
Win7 64 (a Complete new installation)
VMWare Mashine
4 Core
8 GB RAM
View 4 Replies
View Related
Dec 13, 2012
WARNING/ Windows update crash X6
View 14 Replies
View Related
Oct 23, 2010
Specs:
Autocad Civil 3D 2011 (64 bit)
AMD Athlon(tm) 64 FX-62 Dual Core Processor
NVIDIA GeForce GTX 260 (Graphics Card)
8 gigs of DDR2 ram
Dual monitors
Windows 7 64 bit
The cursor (crosshair / mouse) flickers constantly when I am moving the mouse around inside the autocad work space. If I draw a line the flickering gets even worse and it starts to lag slightly. The computer meets all of the recommended requirements as far as I am aware.
The CPU never goes above 45% usage and the RAM never goes past 21% usage. So the computer does not seem to be overloaded especially just trying to draw a line. All the drivers are up-to-date. Is it possible there is some sort of compatibility issue going on here or something I am overlooking?
View 8 Replies
View Related
Apr 15, 2011
System Information:
Win 7 Pro 64-bit
AutoCAD Map 3D 2011 x64
Hardware:
Core i5- 650
8GB Ram
NVIDEA FX 580
Our company purchased two brand new computers and upgraded to Map 3d 2011 and it has resulted in major time lag and running slow issues. We use a 15mb city map as are main drawing file and in AutoCad Map 2004 it runs smoothly. After the upgrade thing are running very poorly. Selecting and deleting files that could be done in seconds in 2004 now can takes a 1/2 hour. The program also seems to get stuck periodical on a selected item , requiring restart. We have upgraded all the drivers and I have tried several different display drivers. I have saved the map as a 2011 file and I have repaired it. I have tried upgrading to Map 2012 but the problems persist.
View 1 Replies
View Related
Jul 21, 2011
I am currently drawing some roof tiles for a house in 3d. I moved the tiles to another drawing so i could get my machine to focus on the tiles rather than walls, windows, doors etc. My machine is still lagging hectically. Basically i would like to know is there a way i can perhaps make the roof tiles file smaller or a "block" of it so that my machine can run properly and i can import it into the drawing with the rest of the house. The roof tiles drawing is 40.3mb big. My machine isn't inadequate-hopefully.
I am on a mac running vmware fusion with windows 7 32-bit and when opening editing the roof tiles file my cpu % spikes to roughly 70% then backs quickly down to 50% and will not increase with Autocad not responding-leave it for a bit and it loads but lags a bit when i orbit, copy or whateva then back to not responding.
View 7 Replies
View Related
Dec 14, 2012
After a likely upgrade to windows update opentype fonts are no longer 'displayed in coreldraw X3 X4 X5 X6 on any computer. it was necessary to restore the computer to the previous date, coreldraw uninstall and disable automatic updates. The problem is only on Coreldraw. In word and photoshop fonts were displayed correctly. The problem is serious because many studies have Opentype fonts and files appear blank.This update from window I will not have 'never install it?
View 1 Replies
View Related
Aug 29, 2013
At work we have recently upgraded to Inventor 2013 Pro, Although Inventor isnt the most widely used program in the company so its hard to find time to do some set up and get it going smooth. My problem is that i am working on a large process plant all done in inventor and the file is quite large. It takes along time to load and is really laggy when inside the model. Now the model is based in my local office's server my question is if i was using Vault would it keep a local copy on my C:// rather than trying to refresh all parts from ther server. If it is a matter that when working with large files using Vault is the better option than i will need to take some advantages
View 3 Replies
View Related
Apr 5, 2011
When I go to draw a polyline, it feels like the snap mode is on and it takes forever to select my end point. It's almost as if it is lagging behind. I did not see this problem until I upgraded to 2012 last week. Going back to 2011, it seems to be doing the same thing.
View 8 Replies
View Related
Nov 23, 2011
My fully activated CorelDRAW X4 turned to trial (0 days left) after performing a windows updating (XP x86) .
Upon launching, a window pops up "No asset found for trial download (license ID: 540228824) with 0 day(s) left, source type 1, lang en and source ID 810007 " and basic features as save, export, scripts, etc are disabled
The about window presents the information correctly of my fully activated CoreDRAW, Owner, serial, version (14.0.0.701)
View 11 Replies
View Related
Feb 21, 2013
-Inventor 2013 SP1.1 (Issue)
-Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
Computer specs:
Win 7 Pro 64bit Service Pack 1
Intel Core 2 Quad Q6700 @ 2.66GHz
8GB Ram
NVIDIA Quadro 2000
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
View 5 Replies
View Related
Jul 31, 2013
As of about two weeks ago, Photoshop cs6 started to really lag. It is practically impossible to do anything. My laptop is 3 months old, and i barely have any documents on my desktop. Why its lagging.
View 2 Replies
View Related
Jan 2, 2009
I never had lagging problems of any kind using Photoshop CS3. But I recently reformatted my computer, reinstalled PS CS3, and wow... the redraw and updating was awful! Brush strokes took several seconds to show, for example.
I looked into my preferences for the culprit. I changed the amount of RAM Photoshop should use, reordered my scratch disks. Changed the # of history states & cache levels, checked & unchecked enable 3D acceleration... Each time I changed one preference, I closed & reopened photoshop. No go, same lagging!
I kept asking myself what was different. Then I remembered: after reformatting my computer,
I updated my ZoneAlarm from version 7 to version 8. I had never before used this updated version of ZA with CS3.
So in ZoneAlarm, I went to
Program Control,
Programs, and saw that whereas the "Trust Level", "Access", "Server", and "Send Mail" columns were all set to question marks for Photoshop 7 (meaning ZA asks me before allowing Photoshop 7 certain permissions), several of those same options were listed as "X's" (completely blocked) when I reinstalled Photoshop CS3.
ZoneAlarm 8
never prompted me, as version 7 did, about certain permissions for CS3! And it didn't occur to me to look into ZA's settings when Photoshop was virtually unusable. My clue came from a CS4 troubleshooting tip here: temporarily disable one's AV and see how PS behaves. The difference after disabling ZA was astounding!
All this to say, you may not have to replace your AV if you find it makes Photoshop lag. Photoshop CS3 worked smoothly after I changed my AV's permissions.
View 8 Replies
View Related
Jan 26, 2009
I've just rebuilt my PC with the following specs:
CPU - Intel I7 920 2.66ghz Quad Core
Mobo - Asus P6T Deluxe OC Palm Edition
RAM - 6Gb G.Skill DDR3 PC3-12800 (1600mhz) (9-9-9-24) RAM in Triple Channel setup
GPU - BFG nVidia GeForce GTX280 1024mb OC2 Edition
HDDs - Seagate 500GB 32mb Cache SATA II Main drive, Western Digital 500GB 16mb Cache SATA
II Documents Drive, Western Digital 320GB 16mb Cache SATA II Photoshop Scratch Disk
PSU - Hyper Type M 880W
Case - Coolermaster Cosmos
I am using Windows XP Pro x64 Edition and the 64bit version of CS4.
I'm quite pleased with the system so far, it pretty much obliterates everything you throw at it without blinking an eye. However, I am absolutely stumped as to why the in the world Photoshop CS4 (and CS3) are running as if my system is 10 years old...
So here's what's happening:
After rebuilding my system with the above specs I have installed Photoshop CS4 and have opened up a painting I have been working on. I zoom in and the screen redraw is sickeningly slow. I hold space and drag the canvas to navigate around it, and again the redraw rate is terrible and results in what I can only describe as more like a render in something like 3D Max than simply dragging the canvas in Photoshop. While the brush control is smooth for the most part, when painting using several quick strokes I get a lot of lag after a little while which manifests as my brush strokes not registering and then all of a sudden happening at once.
Now, I have CS4 installed on my other system at my parents house which has the following specs:
Intel Core2Duo E6750 2.66ghz (OCed to 3.1ghz) CPU
Asus P5KE Deluxe Motherboard
8GB OCZ DDR2 800mhz RAM
BFG nVidia GeForce 9600 GT OC2 Edition
2x Seagate 250gb HDDs (Not in RAID)
And with this system, Photoshop CS4 works great with the only exception being the OpenGL support not being supported.
I have updated all of the drivers on this i7 system. I've even reinstalled older versions of the video card driver and still I get lag. I've uninstalled Nod32 Antivirus, Comodo Firewall, stopped Diskeeper from automatically defragging and ended lots of uneeded processes but I still get this problem. I've uninstalled my Wacom Tablet drivers and used the mouse in Photoshop and that hasn't helped. I've reinstalled 3 older versions of Wacom Drivers also to no avail.
I've even formatted and tried a fresh install.
Also, I tried reinstalling Photoshop CS3 and get similar problems. Only in CS3 there is no issue with the redraw rate, only it lags all of a sudden while trying to navigate an image with space held down and dragging on the mouse or wacom pen (or a blank canvas for that matter) then it will freeze the images movement then suddenly jump.
View 15 Replies
View Related
Aug 5, 2013
I've found recently that Photoshop (CS5) is lagging or completely crashing when I use any of my brushes. I'm doing a painting in one document at the moment and it's near on impossible because every time I make a brush stroke it takes 10 seconds or so to recover. And now it's got to the point where I'm trying to smudge things but every time I make a stroke it crashes PS completely.
I've turned off Enable GL drawing and I've made sure I don't have too many programs running in the background on my computer, and I'm unsure what else to try. (I have Windows 8, if that's relevant).
View 3 Replies
View Related
Oct 26, 2012
Lately my CS5 is lagging and slow. Total available RAM is 1674 and I'm letting PS use 1290 - is that not enough???? I've been using this program for years and just within the last month it's started acting up. Sometimes in Cam Raw it locks up and requires a total system shut down.
View 1 Replies
View Related
Oct 22, 2010
I'm running Corel Videostudio Pro X2 on Windows XP. I haven't had any problems doing a straight video and using some inserted images. For the first time I've tried just to use images (18 of them) with a music score--no video at all. I set everything up at timed intervals for the images to appear at certain points in the score and it seems to be fine. However, when I do a full playback, the images begin to lag in the range of 1-2 seconds behind the score. When I scroll back over just a short little section of one image, they sync up again. It doesn't stay in sync for longer ranges (playing from beginning to end--about 3:30 total). I have tried rendering in HD and the same thing occurs. This is for Youtube.
View 5 Replies
View Related
Dec 2, 2010
Video and overlay track are lagging during project playback Does not lag when clip playback. I need to preview all the tracks to make corrections. Also note that when fully rendered it does not lag. Even when playing single track lag is noticable. audio, vocal, and title tracks are fine when playing back. Its just Video and overlay track that are lagging
View 1 Replies
View Related
Apr 12, 2006
For some reason, recently, when i paint in pshop CS2, every 10 or 12 strokes, my computer lags and I have to sit here and wait for it to catch up, and draw the last couple of strokes I made. It is REALLY irritating when painting for he obvious reason that it delays creativity. I have a dual 2 ghz G5 with 7 gb of RAM AND 550 GB of space, so it CAN'T be my comp. Any Ideas why it's laging so badly.
Also, in the last couple of weeks, for some reason, pshop is redrawing my pixels on the screen, making it very difficult to paint. Basically, when I paint, or drag the screen around, it keep residual pixels from my last angle, and they don't move until I drag my brush through them, making it impossible to paint accurately. I have to zoom out and then back in to clear it.
View 4 Replies
View Related
Sep 25, 2012
i have a Mac OSX V.10.7.5 and 3.4 GHz i7 8GB Ram.
Indesign and Photoshop open files very quickly, but illustrator while opening any type of file—whether it's an AI Cs6 file or EPS file or SVG file—there is at least a 20 second delay.
View 1 Replies
View Related
Jul 6, 2013
I am running Illustrator CS6, and I have found that Illustrator lags a lot when I have multiple objects that are very small. For example, for my school project I am creating four seasons, and I have multiple leaves on the trees, but since they are very small and I have multiple copies it slows Illustrator down siginificantly. What I am trying to figure out is if there is a way to reduce the quality of the artwork, so that It can run fast when I need it to. Below is a link to download the file, so you can see what I mean. Right now it lags when you zoom In/Out or if you try and move the object. Also, my computer Specs are listed below
Intel I7 2700K (3.5GHz Quad Core)8GB DDR3 PC3-1600Radeon HD5770 (1GB Ram)
For the most part, it loads files very quick but after making multiple copies of files its starts to really lag a lot. The download link is below [URL] ....
View 1 Replies
View Related
